mirror of https://github.com/ArduPilot/ardupilot
d4bd7e790a
Adds hwdef files for the 3DR Solo. CubeBlack-solo is based on the CubeBlack hwdef, with the only difference being default parameters required by the Solo. CubeGreen-solo is is also identical to CubeBlack, but has default parameters required by those with a Green Cube in their Solo. Parameter default files are pulled from the Tools\Frame_Parms directory where the Solo's parameter files are maintained. |
||
|---|---|---|
| .. | ||
| README.md | ||
| hwdef-bl.dat | ||
| hwdef.dat | ||
README.md
CubeBlack-solo variant of the CubeBlack Flight Controller
The CubeBlack-solo build is identical to the CubeBlack build, but includes a large set of default parameters required by the Solo.
- For use in ArduCopter 3.7 and higher. Not compatible with any previous versions of ArduCopter or with other vehicle types.
- For data on the Hex CubeBlack flight controller, see the Hex CubeBlack hwdef readme
- For the parameter list used by this build, see Tools/Fram_params/Solo_Copter-3.7_BlackCube.param
Using this build in waf
./waf configure --board CubeBlack-solo./waf copter- The completed firmware binary will be located in
/ardupilot/build/CubeBlack-solo/bin/arducopter.apj