.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: remove LOG_FROM_STARTUP define
|
2014-10-17 16:40:18 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
AP_State.pde
|
Copter: add land_complete_maybe flag
|
2014-09-19 16:43:15 +09:00 |
ArduCopter.pde
|
Copter: add comments to control switch debouncing
|
2014-10-31 15:48:28 +09:00 |
Attitude.pde
|
Copter: sanity check throttle deadzone
|
2014-09-02 12:40:15 +09:00 |
GCS_Mavlink.pde
|
Copter: fix camera feedback msg handling
|
2014-10-31 14:46:47 +09:00 |
Log.pde
|
Copter: log DCM reported roll-pitch and yaw error
|
2014-10-18 20:09:39 +09:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: support logging while disarmed
|
2014-10-17 16:29:59 +09:00 |
Parameters.pde
|
Copter: add NearlyAll-AC315 LOG_BITMASK description
|
2014-10-17 16:40:13 +09:00 |
ReleaseNotes.txt
|
Copter: minor update to AC3.2-rc14 ReleaseNotes
|
2014-10-31 10:57:43 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
commands.pde
|
Copter: support logging while disarmed
|
2014-10-17 16:29:59 +09:00 |
commands_logic.pde
|
Copter: send a camera_feedback message when there is a camera trigger
|
2014-10-31 14:46:42 +09:00 |
compassmot.pde
|
AP_Motors: throttle_pass_through accepts pwm
|
2014-09-19 22:21:45 +09:00 |
compat.h
|
Copter: remove unused HIGH, LOW definitions
|
2014-05-09 16:35:21 +09:00 |
compat.pde
|
Copter: remove unused compat.pde entries
|
2014-01-30 14:33:55 +09:00 |
config.h
|
Copter: convert to new AP_InertialSensor API
|
2014-10-24 12:10:38 +11:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_acro.pde
|
Copter: range check ACRO_EXPO to be no more than 1
|
2014-08-18 12:56:22 +09:00 |
control_althold.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_auto.pde
|
Copter: minor format fix
|
2014-10-21 11:54:35 +09:00 |
control_autotune.pde
|
Copter: minor reformat of control_autotune
|
2014-11-05 21:08:39 +09:00 |
control_circle.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_drift.pde
|
Copter: move drift thr assist to separate function
|
2014-08-31 14:22:56 +09:00 |
control_flip.pde
|
Copter: ensure motors don't stop during flip
|
2014-08-23 23:40:13 +09:00 |
control_guided.pde
|
Copter: support GUIDED_ENABLE and GUIDED_LIMITS
|
2014-10-13 21:40:24 +09:00 |
control_land.pde
|
Copter: landing detector checks baro climb rate
|
2014-10-22 17:29:14 +09:00 |
control_loiter.pde
|
Copter: rename land_maybe_complete function
|
2014-09-19 16:43:17 +09:00 |
control_ofloiter.pde
|
Copter: pilot override used immediately in OF_Loiter
|
2014-10-15 16:36:28 +09:00 |
control_poshold.pde
|
Copter: rename land_maybe_complete function
|
2014-09-19 16:43:17 +09:00 |
control_rtl.pde
|
Copter: Change all zero throttle checks that should be conservative to use ap.throttle_zero
|
2014-10-08 20:54:24 +09:00 |
control_sport.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_stabilize.pde
|
Copter: Don't use land detector to stop stabilizing in stabilize
|
2014-07-08 19:41:41 +09:00 |
crash_check.pde
|
Copter: fixed some build warnings
|
2014-10-16 14:04:11 +09:00 |
defines.h
|
Copter: loiter copter without accepting user input at end of auto mission
|
2014-10-20 10:46:14 +09:00 |
ekf_check.pde
|
Copter: fix to dcm-check to be continuous
|
2014-10-27 12:37:56 +09:00 |
esc_calibration.pde
|
Copter: remove abbreviations from GCS messages
|
2014-11-05 20:04:52 +09:00 |
events.pde
|
Copter: Change all zero throttle checks that should be conservative to use ap.throttle_zero
|
2014-10-08 20:54:24 +09:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: fence breach causes disarm if landed
|
2014-10-16 14:09:02 +09:00 |
flight_mode.pde
|
Copter: allow arming in GUIDED only from GCS
|
2014-10-11 16:05:32 +09:00 |
heli.h
|
TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM.
|
2014-07-13 17:11:30 +09:00 |
heli.pde
|
TradHeli: Force recalc scalers after setting main loop time in MotorsHeli so that ramp scalers are right for 32-bit.
|
2014-07-13 17:11:25 +09:00 |
heli_control_acro.pde
|
TradHeli: call passthrough_bf_roll_pitch_rate_yaw
|
2014-08-22 16:29:00 +09:00 |
heli_control_stabilize.pde
|
TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM.
|
2014-07-13 17:11:30 +09:00 |
inertia.pde
|
Copter: flag current alt as relative
|
2014-06-17 14:11:42 +10:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motor_test.pde
|
Copter: remove debug
|
2014-10-23 22:21:48 +09:00 |
motors.pde
|
Copter: remove abbreviations from GCS messages
|
2014-11-05 20:04:52 +09:00 |
navigation.pde
|
Copter: bug fix for conditional_distance command
|
2014-04-17 22:23:28 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
Copter: bug fix display of PerfMon log's num long loops
|
2014-03-08 15:17:03 +09:00 |
position_vector.pde
|
Copter: restore pv_get_horizontal_distance_cm function
|
2014-07-06 17:01:05 +09:00 |
radio.pde
|
Copter: throttle zero debounce to separate function
|
2014-10-08 21:52:16 +09:00 |
readme.txt
|
Copter: readme file renamed and directs to wiki
|
2014-02-12 21:03:45 +09:00 |
sensors.pde
|
Copter: re-order init_sonar
|
2014-10-31 20:40:24 +09:00 |
setup.pde
|
Copter: integrate optflow_enable param move to optflow class
|
2014-10-15 16:35:43 +09:00 |
switches.pde
|
Copter: allow starting autotune from flightmode switch
|
2014-11-05 21:08:36 +09:00 |
system.pde
|
Copter: reset ahrs gyro drift after gyro calibration
|
2014-10-28 20:25:36 +09:00 |
test.pde
|
Copter: landing detector checks baro climb rate
|
2014-10-22 17:29:14 +09:00 |