mirror of https://github.com/ArduPilot/ardupilot
117 lines
3.2 KiB
C++
117 lines
3.2 KiB
C++
/*
|
|
* This file is free software: you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
* See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
/*
|
|
soft serial receive implementation, based on pulse width inputs
|
|
*/
|
|
|
|
#include "SoftSerial.h"
|
|
#include <AP_Math/crc.h>
|
|
#include <stdio.h>
|
|
|
|
SoftSerial::SoftSerial(uint32_t _baudrate, serial_config _config) :
|
|
baudrate(_baudrate),
|
|
half_bit((1000000U / baudrate)/2),
|
|
config(_config)
|
|
{
|
|
switch (config) {
|
|
case SERIAL_CONFIG_8N1:
|
|
case SERIAL_CONFIG_8N1I:
|
|
data_width = 8;
|
|
byte_width = 10;
|
|
stop_mask = 0x200;
|
|
break;
|
|
case SERIAL_CONFIG_8E2I:
|
|
data_width = 9;
|
|
byte_width = 12;
|
|
stop_mask = 0xC00;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
process a pulse made up of a width of values at high voltage
|
|
followed by a width at low voltage
|
|
*/
|
|
bool SoftSerial::process_pulse(uint32_t width_high, uint32_t width_low, uint8_t &byte)
|
|
{
|
|
// convert to bit widths, allowing for a half bit error
|
|
uint16_t bits_high = ((width_high+half_bit)*baudrate) / 1000000;
|
|
uint16_t bits_low = ((width_low+half_bit)*baudrate) / 1000000;
|
|
|
|
byte_timestamp_us = timestamp_us;
|
|
timestamp_us += (width_high + width_low);
|
|
|
|
if (bits_high == 0 || bits_low == 0) {
|
|
// invalid data
|
|
goto reset;
|
|
}
|
|
|
|
if (bits_high >= byte_width) {
|
|
// if we have a start bit and a stop bit then we can have at
|
|
// most 9 bits in high state for data. The rest must be idle
|
|
// bits
|
|
bits_high = byte_width-1;
|
|
}
|
|
|
|
if (state.bit_ofs == 0) {
|
|
// we are in idle state, waiting for first low bit. swallow
|
|
// the high bits
|
|
bits_high = 0;
|
|
}
|
|
|
|
state.byte |= ((1U<<bits_high)-1) << state.bit_ofs;
|
|
|
|
state.bit_ofs += bits_high + bits_low;
|
|
|
|
if (state.bit_ofs >= byte_width) {
|
|
// check start bit
|
|
if ((state.byte & 1) != 0) {
|
|
goto reset;
|
|
}
|
|
// check stop bits
|
|
if ((state.byte & stop_mask) != stop_mask) {
|
|
goto reset;
|
|
}
|
|
if (config == SERIAL_CONFIG_8E2I) {
|
|
// check parity
|
|
if (parity((state.byte>>1)&0xFF) != (state.byte&0x200)>>9) {
|
|
goto reset;
|
|
}
|
|
}
|
|
|
|
byte = ((state.byte>>1) & 0xFF);
|
|
state.byte >>= byte_width;
|
|
state.bit_ofs -= byte_width;
|
|
if (state.bit_ofs > byte_width) {
|
|
state.byte = 0;
|
|
state.bit_ofs = bits_low;
|
|
}
|
|
// swallow idle bits
|
|
while (state.bit_ofs > 0 && (state.byte & 1)) {
|
|
state.bit_ofs--;
|
|
state.byte >>= 1;
|
|
}
|
|
return true;
|
|
}
|
|
return false;
|
|
|
|
reset:
|
|
state.byte = 0;
|
|
state.bit_ofs = 0;
|
|
|
|
return false;
|
|
}
|
|
|