mirror of https://github.com/ArduPilot/ardupilot
872 lines
33 KiB
C++
872 lines
33 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "AP_ESC_Telem.h"
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <GCS_MAVLink/GCS.h>
|
|
#include <AP_Logger/AP_Logger.h>
|
|
|
|
#if HAL_WITH_ESC_TELEM
|
|
|
|
#include <AP_BoardConfig/AP_BoardConfig.h>
|
|
#include <AP_TemperatureSensor/AP_TemperatureSensor_config.h>
|
|
|
|
#include <AP_Math/AP_Math.h>
|
|
|
|
//#define ESC_TELEM_DEBUG
|
|
|
|
#define ESC_RPM_CHECK_TIMEOUT_US 210000UL // timeout for motor running validity
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
// table of user settable parameters
|
|
const AP_Param::GroupInfo AP_ESC_Telem::var_info[] = {
|
|
|
|
// @Param: _MAV_OFS
|
|
// @DisplayName: ESC Telemetry mavlink offset
|
|
// @Description: Offset to apply to ESC numbers when reporting as ESC_TELEMETRY packets over MAVLink. This allows high numbered motors to be displayed as low numbered ESCs for convenience on GCS displays. A value of 4 would send ESC on output 5 as ESC number 1 in ESC_TELEMETRY packets
|
|
// @Increment: 1
|
|
// @Range: 0 31
|
|
// @User: Standard
|
|
AP_GROUPINFO("_MAV_OFS", 1, AP_ESC_Telem, mavlink_offset, 0),
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
AP_ESC_Telem::AP_ESC_Telem()
|
|
{
|
|
if (_singleton) {
|
|
AP_HAL::panic("Too many AP_ESC_Telem instances");
|
|
}
|
|
_singleton = this;
|
|
#if !defined(IOMCU_FW)
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
#endif
|
|
}
|
|
|
|
// return the average motor RPM
|
|
float AP_ESC_Telem::get_average_motor_rpm(uint32_t servo_channel_mask) const
|
|
{
|
|
float rpm_avg = 0.0f;
|
|
uint8_t valid_escs = 0;
|
|
|
|
// average the rpm of each motor
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
if (BIT_IS_SET(servo_channel_mask,i)) {
|
|
float rpm;
|
|
if (get_rpm(i, rpm)) {
|
|
rpm_avg += rpm;
|
|
valid_escs++;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (valid_escs > 0) {
|
|
rpm_avg /= valid_escs;
|
|
}
|
|
|
|
return rpm_avg;
|
|
}
|
|
|
|
// return all the motor frequencies in Hz for dynamic filtering
|
|
uint8_t AP_ESC_Telem::get_motor_frequencies_hz(uint8_t nfreqs, float* freqs) const
|
|
{
|
|
uint8_t valid_escs = 0;
|
|
|
|
// average the rpm of each motor as reported by BLHeli and convert to Hz
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS && valid_escs < nfreqs; i++) {
|
|
float rpm;
|
|
if (get_rpm(i, rpm)) {
|
|
freqs[valid_escs++] = rpm * (1.0f / 60.0f);
|
|
} else if (was_rpm_data_ever_reported(_rpm_data[i])) {
|
|
// if we have ever received data on an ESC, mark it as valid but with no data
|
|
// this prevents large frequency shifts when ESCs disappear
|
|
freqs[valid_escs++] = 0.0f;
|
|
}
|
|
}
|
|
|
|
return MIN(valid_escs, nfreqs);
|
|
}
|
|
|
|
// get mask of ESCs that sent valid telemetry and/or rpm data in the last
|
|
// ESC_TELEM_DATA_TIMEOUT_MS/ESC_RPM_DATA_TIMEOUT_US
|
|
uint32_t AP_ESC_Telem::get_active_esc_mask() const {
|
|
uint32_t ret = 0;
|
|
const uint32_t now = AP_HAL::millis();
|
|
uint32_t now_us = AP_HAL::micros();
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
if (_telem_data[i].last_update_ms == 0 && !was_rpm_data_ever_reported(_rpm_data[i])) {
|
|
// have never seen telem from this ESC
|
|
continue;
|
|
}
|
|
if (_telem_data[i].stale(now)
|
|
&& !rpm_data_within_timeout(_rpm_data[i], now_us, ESC_RPM_DATA_TIMEOUT_US)) {
|
|
continue;
|
|
}
|
|
ret |= (1U << i);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
// return an active ESC for the purposes of reporting (e.g. in the OSD)
|
|
uint8_t AP_ESC_Telem::get_max_rpm_esc() const
|
|
{
|
|
uint32_t ret = 0;
|
|
float max_rpm = 0;
|
|
const uint32_t now = AP_HAL::millis();
|
|
const uint32_t now_us = AP_HAL::micros();
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
if (_telem_data[i].last_update_ms == 0 && !was_rpm_data_ever_reported(_rpm_data[i])) {
|
|
// have never seen telem from this ESC
|
|
continue;
|
|
}
|
|
if (_telem_data[i].stale(now)
|
|
&& !rpm_data_within_timeout(_rpm_data[i], now_us, ESC_RPM_DATA_TIMEOUT_US)) {
|
|
continue;
|
|
}
|
|
if (_rpm_data[i].rpm > max_rpm) {
|
|
max_rpm = _rpm_data[i].rpm;
|
|
ret = i;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
// return number of active ESCs present
|
|
uint8_t AP_ESC_Telem::get_num_active_escs() const {
|
|
uint32_t active = get_active_esc_mask();
|
|
return __builtin_popcount(active);
|
|
}
|
|
|
|
// return the whether all the motors in servo_channel_mask are running
|
|
bool AP_ESC_Telem::are_motors_running(uint32_t servo_channel_mask, float min_rpm, float max_rpm) const
|
|
{
|
|
const uint32_t now = AP_HAL::micros();
|
|
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
if (BIT_IS_SET(servo_channel_mask, i)) {
|
|
const volatile AP_ESC_Telem_Backend::RpmData& rpmdata = _rpm_data[i];
|
|
// we choose a relatively strict measure of health so that failsafe actions can rely on the results
|
|
if (!rpm_data_within_timeout(rpmdata, now, ESC_RPM_CHECK_TIMEOUT_US)) {
|
|
return false;
|
|
}
|
|
if (rpmdata.rpm < min_rpm) {
|
|
return false;
|
|
}
|
|
if ((max_rpm > 0) && (rpmdata.rpm > max_rpm)) {
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
// is telemetry active for the provided channel mask
|
|
bool AP_ESC_Telem::is_telemetry_active(uint32_t servo_channel_mask) const
|
|
{
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
if (BIT_IS_SET(servo_channel_mask, i)) {
|
|
// no data received
|
|
if (get_last_telem_data_ms(i) == 0 && !was_rpm_data_ever_reported(_rpm_data[i])) {
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's slewed rpm if available, returns true on success
|
|
bool AP_ESC_Telem::get_rpm(uint8_t esc_index, float& rpm) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::RpmData& rpmdata = _rpm_data[esc_index];
|
|
|
|
if (is_zero(rpmdata.update_rate_hz)) {
|
|
return false;
|
|
}
|
|
|
|
const uint32_t now = AP_HAL::micros();
|
|
if (rpm_data_within_timeout(rpmdata, now, ESC_RPM_DATA_TIMEOUT_US)) {
|
|
const float slew = MIN(1.0f, (now - rpmdata.last_update_us) * rpmdata.update_rate_hz * (1.0f / 1e6f));
|
|
rpm = (rpmdata.prev_rpm + (rpmdata.rpm - rpmdata.prev_rpm) * slew);
|
|
|
|
#if AP_SCRIPTING_ENABLED
|
|
if ((1U<<esc_index) & rpm_scale_mask) {
|
|
rpm *= rpm_scale_factor[esc_index];
|
|
}
|
|
#endif
|
|
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// get an individual ESC's raw rpm if available, returns true on success
|
|
bool AP_ESC_Telem::get_raw_rpm(uint8_t esc_index, float& rpm) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::RpmData& rpmdata = _rpm_data[esc_index];
|
|
|
|
const uint32_t now = AP_HAL::micros();
|
|
|
|
if (!rpm_data_within_timeout(rpmdata, now, ESC_RPM_DATA_TIMEOUT_US)) {
|
|
return false;
|
|
}
|
|
|
|
rpm = rpmdata.rpm;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's temperature in centi-degrees if available, returns true on success
|
|
bool AP_ESC_Telem::get_temperature(uint8_t esc_index, int16_t& temp) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::TEMPERATURE | AP_ESC_Telem_Backend::TelemetryType::TEMPERATURE_EXTERNAL)) {
|
|
return false;
|
|
}
|
|
temp = telemdata.temperature_cdeg;
|
|
return true;
|
|
}
|
|
|
|
// get an individual motor's temperature in centi-degrees if available, returns true on success
|
|
bool AP_ESC_Telem::get_motor_temperature(uint8_t esc_index, int16_t& temp) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::MOTOR_TEMPERATURE | AP_ESC_Telem_Backend::TelemetryType::MOTOR_TEMPERATURE_EXTERNAL)) {
|
|
return false;
|
|
}
|
|
temp = telemdata.motor_temp_cdeg;
|
|
return true;
|
|
}
|
|
|
|
// get the highest ESC temperature in centi-degrees if available, returns true if there is valid data for at least one ESC
|
|
bool AP_ESC_Telem::get_highest_temperature(int16_t& temp) const
|
|
{
|
|
uint8_t valid_escs = 0;
|
|
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
int16_t temp_temp;
|
|
if (get_temperature(i, temp_temp)) {
|
|
temp = MAX(temp, temp_temp);
|
|
valid_escs++;
|
|
}
|
|
}
|
|
|
|
return valid_escs > 0;
|
|
}
|
|
|
|
// get an individual ESC's current in Ampere if available, returns true on success
|
|
bool AP_ESC_Telem::get_current(uint8_t esc_index, float& amps) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::CURRENT)) {
|
|
return false;
|
|
}
|
|
amps = telemdata.current;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's voltage in Volt if available, returns true on success
|
|
bool AP_ESC_Telem::get_voltage(uint8_t esc_index, float& volts) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::VOLTAGE)) {
|
|
return false;
|
|
}
|
|
volts = telemdata.voltage;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's energy consumption in milli-Ampere.hour if available, returns true on success
|
|
bool AP_ESC_Telem::get_consumption_mah(uint8_t esc_index, float& consumption_mah) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::CONSUMPTION)) {
|
|
return false;
|
|
}
|
|
consumption_mah = telemdata.consumption_mah;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's usage time in seconds if available, returns true on success
|
|
bool AP_ESC_Telem::get_usage_seconds(uint8_t esc_index, uint32_t& usage_s) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::USAGE)) {
|
|
return false;
|
|
}
|
|
usage_s = telemdata.usage_s;
|
|
return true;
|
|
}
|
|
|
|
#if AP_EXTENDED_ESC_TELEM_ENABLED
|
|
// get an individual ESC's input duty cycle if available, returns true on success
|
|
bool AP_ESC_Telem::get_input_duty(uint8_t esc_index, uint8_t& input_duty) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::INPUT_DUTY)) {
|
|
return false;
|
|
}
|
|
input_duty = telemdata.input_duty;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's output duty cycle if available, returns true on success
|
|
bool AP_ESC_Telem::get_output_duty(uint8_t esc_index, uint8_t& output_duty) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::OUTPUT_DUTY)) {
|
|
return false;
|
|
}
|
|
output_duty = telemdata.output_duty;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's status flags if available, returns true on success
|
|
bool AP_ESC_Telem::get_flags(uint8_t esc_index, uint32_t& flags) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::FLAGS)) {
|
|
return false;
|
|
}
|
|
flags = telemdata.flags;
|
|
return true;
|
|
}
|
|
|
|
// get an individual ESC's percentage of output power if available, returns true on success
|
|
bool AP_ESC_Telem::get_power_percentage(uint8_t esc_index, uint8_t& power_percentage) const
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return false;
|
|
}
|
|
|
|
const volatile AP_ESC_Telem_Backend::TelemetryData& telemdata = _telem_data[esc_index];
|
|
if (!telemdata.valid(AP_ESC_Telem_Backend::TelemetryType::POWER_PERCENTAGE)) {
|
|
return false;
|
|
}
|
|
power_percentage = telemdata.power_percentage;
|
|
return true;
|
|
}
|
|
#endif // AP_EXTENDED_ESC_TELEM_ENABLED
|
|
|
|
// send ESC telemetry messages over MAVLink
|
|
void AP_ESC_Telem::send_esc_telemetry_mavlink(uint8_t mav_chan)
|
|
{
|
|
#if HAL_GCS_ENABLED
|
|
if (!_have_data) {
|
|
// we've never had any data
|
|
return;
|
|
}
|
|
|
|
const uint32_t now = AP_HAL::millis();
|
|
const uint32_t now_us = AP_HAL::micros();
|
|
|
|
// loop through groups of 4 ESCs
|
|
const uint8_t esc_offset = constrain_int16(mavlink_offset, 0, ESC_TELEM_MAX_ESCS-1);
|
|
|
|
// ensure we send out partially-full groups:
|
|
const uint8_t num_idx = (ESC_TELEM_MAX_ESCS + 3) / 4;
|
|
|
|
for (uint8_t idx = 0; idx < num_idx; idx++) {
|
|
const uint8_t i = (next_idx + idx) % num_idx;
|
|
|
|
// return if no space in output buffer to send mavlink messages
|
|
if (!HAVE_PAYLOAD_SPACE((mavlink_channel_t)mav_chan, ESC_TELEMETRY_1_TO_4)) {
|
|
// not enough mavlink buffer space, start at this index next time
|
|
next_idx = i;
|
|
return;
|
|
}
|
|
|
|
bool all_stale = true;
|
|
for (uint8_t j=0; j<4; j++) {
|
|
const uint8_t esc_id = (i * 4 + j) + esc_offset;
|
|
if (esc_id < ESC_TELEM_MAX_ESCS &&
|
|
(!_telem_data[esc_id].stale(now) ||
|
|
rpm_data_within_timeout(_rpm_data[esc_id], now_us, ESC_RPM_DATA_TIMEOUT_US))) {
|
|
all_stale = false;
|
|
break;
|
|
}
|
|
}
|
|
if (all_stale) {
|
|
// skip this group of ESCs if no data to send
|
|
continue;
|
|
}
|
|
|
|
|
|
// arrays to hold output
|
|
mavlink_esc_telemetry_1_to_4_t s {};
|
|
|
|
// fill in output arrays
|
|
for (uint8_t j = 0; j < 4; j++) {
|
|
const uint8_t esc_id = (i * 4 + j) + esc_offset;
|
|
if (esc_id >= ESC_TELEM_MAX_ESCS) {
|
|
continue;
|
|
}
|
|
volatile AP_ESC_Telem_Backend::TelemetryData const &telemdata = _telem_data[esc_id];
|
|
|
|
s.temperature[j] = telemdata.temperature_cdeg / 100;
|
|
s.voltage[j] = constrain_float(telemdata.voltage * 100.0f, 0, UINT16_MAX);
|
|
s.current[j] = constrain_float(telemdata.current * 100.0f, 0, UINT16_MAX);
|
|
s.totalcurrent[j] = constrain_float(telemdata.consumption_mah, 0, UINT16_MAX);
|
|
float rpmf;
|
|
if (get_rpm(esc_id, rpmf)) {
|
|
s.rpm[j] = constrain_float(rpmf, 0, UINT16_MAX);
|
|
}
|
|
s.count[j] = telemdata.count;
|
|
}
|
|
|
|
// make sure a msg hasn't been extended
|
|
static_assert(MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_5_TO_8_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_9_TO_12_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_13_TO_16_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_17_TO_20_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_21_TO_24_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_21_TO_24_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_25_TO_28_LEN &&
|
|
MAVLINK_MSG_ID_ESC_TELEMETRY_1_TO_4_LEN == MAVLINK_MSG_ID_ESC_TELEMETRY_29_TO_32_LEN,
|
|
"telem messages not compatible");
|
|
|
|
const mavlink_channel_t chan = (mavlink_channel_t)mav_chan;
|
|
// send messages
|
|
switch (i) {
|
|
case 0:
|
|
mavlink_msg_esc_telemetry_1_to_4_send_struct(chan, &s);
|
|
break;
|
|
case 1:
|
|
mavlink_msg_esc_telemetry_5_to_8_send_struct(chan, (const mavlink_esc_telemetry_5_to_8_t *)&s);
|
|
break;
|
|
case 2:
|
|
mavlink_msg_esc_telemetry_9_to_12_send_struct(chan, (const mavlink_esc_telemetry_9_to_12_t *)&s);
|
|
break;
|
|
case 3:
|
|
mavlink_msg_esc_telemetry_13_to_16_send_struct(chan, (const mavlink_esc_telemetry_13_to_16_t *)&s);
|
|
break;
|
|
#if ESC_TELEM_MAX_ESCS > 16
|
|
case 4:
|
|
mavlink_msg_esc_telemetry_17_to_20_send_struct(chan, (const mavlink_esc_telemetry_17_to_20_t *)&s);
|
|
break;
|
|
case 5:
|
|
mavlink_msg_esc_telemetry_21_to_24_send_struct(chan, (const mavlink_esc_telemetry_21_to_24_t *)&s);
|
|
break;
|
|
case 6:
|
|
mavlink_msg_esc_telemetry_25_to_28_send_struct(chan, (const mavlink_esc_telemetry_25_to_28_t *)&s);
|
|
break;
|
|
case 7:
|
|
mavlink_msg_esc_telemetry_29_to_32_send_struct(chan, (const mavlink_esc_telemetry_29_to_32_t *)&s);
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
// we checked for all sends without running out of buffer space,
|
|
// start at zero next time
|
|
next_idx = 0;
|
|
|
|
#endif // HAL_GCS_ENABLED
|
|
}
|
|
|
|
// record an update to the telemetry data together with timestamp
|
|
// this should be called by backends when new telemetry values are available
|
|
void AP_ESC_Telem::update_telem_data(const uint8_t esc_index, const AP_ESC_Telem_Backend::TelemetryData& new_data, const uint16_t data_mask)
|
|
{
|
|
// rpm and telemetry data are not protected by a semaphore even though updated from different threads
|
|
// all data is per-ESC and only written from the update thread and read by the user thread
|
|
// each element is a primitive type and the timestamp is only updated at the end, thus a caller
|
|
// can only get slightly more up-to-date information that perhaps they were expecting or might
|
|
// read data that has just gone stale - both of these are safe and avoid the overhead of locking
|
|
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS || data_mask == 0) {
|
|
return;
|
|
}
|
|
|
|
_have_data = true;
|
|
volatile AP_ESC_Telem_Backend::TelemetryData &telemdata = _telem_data[esc_index];
|
|
|
|
#if AP_TEMPERATURE_SENSOR_ENABLED
|
|
// always allow external data. Block "internal" if external has ever its ever been set externally then ignore normal "internal" updates
|
|
const bool has_temperature = (data_mask & AP_ESC_Telem_Backend::TelemetryType::TEMPERATURE_EXTERNAL) ||
|
|
((data_mask & AP_ESC_Telem_Backend::TelemetryType::TEMPERATURE) && !(telemdata.types & AP_ESC_Telem_Backend::TelemetryType::TEMPERATURE_EXTERNAL));
|
|
|
|
const bool has_motor_temperature = (data_mask & AP_ESC_Telem_Backend::TelemetryType::MOTOR_TEMPERATURE_EXTERNAL) ||
|
|
((data_mask & AP_ESC_Telem_Backend::TelemetryType::MOTOR_TEMPERATURE) && !(telemdata.types & AP_ESC_Telem_Backend::TelemetryType::MOTOR_TEMPERATURE_EXTERNAL));
|
|
#else
|
|
const bool has_temperature = (data_mask & AP_ESC_Telem_Backend::TelemetryType::TEMPERATURE);
|
|
const bool has_motor_temperature = (data_mask & AP_ESC_Telem_Backend::TelemetryType::MOTOR_TEMPERATURE);
|
|
#endif
|
|
|
|
if (has_temperature) {
|
|
telemdata.temperature_cdeg = new_data.temperature_cdeg;
|
|
}
|
|
if (has_motor_temperature) {
|
|
telemdata.motor_temp_cdeg = new_data.motor_temp_cdeg;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::VOLTAGE) {
|
|
telemdata.voltage = new_data.voltage;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::CURRENT) {
|
|
telemdata.current = new_data.current;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::CONSUMPTION) {
|
|
telemdata.consumption_mah = new_data.consumption_mah;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::USAGE) {
|
|
telemdata.usage_s = new_data.usage_s;
|
|
}
|
|
|
|
#if AP_EXTENDED_ESC_TELEM_ENABLED
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::INPUT_DUTY) {
|
|
telemdata.input_duty = new_data.input_duty;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::OUTPUT_DUTY) {
|
|
telemdata.output_duty = new_data.output_duty;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::FLAGS) {
|
|
telemdata.flags = new_data.flags;
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::POWER_PERCENTAGE) {
|
|
telemdata.power_percentage = new_data.power_percentage;
|
|
}
|
|
#endif //AP_EXTENDED_ESC_TELEM_ENABLED
|
|
|
|
#if AP_EXTENDED_DSHOT_TELEM_V2_ENABLED
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::EDT2_STATUS) {
|
|
telemdata.edt2_status = merge_edt2_status(telemdata.edt2_status, new_data.edt2_status);
|
|
}
|
|
if (data_mask & AP_ESC_Telem_Backend::TelemetryType::EDT2_STRESS) {
|
|
telemdata.edt2_stress = merge_edt2_stress(telemdata.edt2_stress, new_data.edt2_stress);
|
|
}
|
|
#endif
|
|
|
|
telemdata.count++;
|
|
telemdata.types |= data_mask;
|
|
telemdata.last_update_ms = AP_HAL::millis();
|
|
}
|
|
|
|
// record an update to the RPM together with timestamp, this allows the notch values to be slewed
|
|
// this should be called by backends when new telemetry values are available
|
|
void AP_ESC_Telem::update_rpm(const uint8_t esc_index, const float new_rpm, const float error_rate)
|
|
{
|
|
if (esc_index >= ESC_TELEM_MAX_ESCS) {
|
|
return;
|
|
}
|
|
|
|
_have_data = true;
|
|
|
|
const uint32_t now = MAX(1U ,AP_HAL::micros()); // don't allow a value of 0 in, as we use this as a flag in places
|
|
volatile AP_ESC_Telem_Backend::RpmData& rpmdata = _rpm_data[esc_index];
|
|
const auto last_update_us = rpmdata.last_update_us;
|
|
|
|
rpmdata.prev_rpm = rpmdata.rpm;
|
|
rpmdata.rpm = new_rpm;
|
|
rpmdata.update_rate_hz = 1.0e6f / constrain_uint32((now - last_update_us), 100, 1000000U*10U); // limit the update rate 0.1Hz to 10KHz
|
|
rpmdata.last_update_us = now;
|
|
rpmdata.error_rate = error_rate;
|
|
rpmdata.data_valid = true;
|
|
|
|
#ifdef ESC_TELEM_DEBUG
|
|
hal.console->printf("RPM: rate=%.1fhz, rpm=%f)\n", rpmdata.update_rate_hz, new_rpm);
|
|
#endif
|
|
}
|
|
|
|
#if AP_EXTENDED_DSHOT_TELEM_V2_ENABLED
|
|
|
|
// The following is based on https://github.com/bird-sanctuary/extended-dshot-telemetry.
|
|
// For the following part we explain the bits of Extended DShot Telemetry v2 status telemetry:
|
|
// - bits 0-3: the "stress level"
|
|
// - bit 5: the "error" bit (e.g. the stall event in Bluejay)
|
|
// - bit 6: the "warning" bit (e.g. the desync event in Bluejay)
|
|
// - bit 7: the "alert" bit (e.g. the demag event in Bluejay)
|
|
|
|
// Since logger can read out telemetry values less frequently than they are updated,
|
|
// it makes sense to aggregate these status bits, and to collect the maximum observed stress level.
|
|
// To reduce the logging rate of the EDT2 messages, we will try to log them only once a new frame comes.
|
|
// To track this, we are going to (ab)use bit 15 of the field: 1 means there is something to write.
|
|
|
|
// EDTv2 also features separate "stress" messages.
|
|
// These come more frequently, and are scaled differently (the allowed range is from 0 to 255),
|
|
// so we have to log them separately.
|
|
|
|
constexpr uint16_t EDT2_TELEM_UPDATED = 0x8000U;
|
|
constexpr uint16_t EDT2_STRESS_0F_MASK = 0xfU;
|
|
constexpr uint16_t EDT2_STRESS_FF_MASK = 0xffU;
|
|
constexpr uint16_t EDT2_ERROR_MASK = 0x20U;
|
|
constexpr uint16_t EDT2_WARNING_MASK = 0x40U;
|
|
constexpr uint16_t EDT2_ALERT_MASK = 0x80U;
|
|
constexpr uint16_t EDT2_ALL_BITS = EDT2_ERROR_MASK | EDT2_WARNING_MASK | EDT2_ALERT_MASK;
|
|
|
|
#define EDT2_HAS_NEW_DATA(status) bool((status) & EDT2_TELEM_UPDATED)
|
|
#define EDT2_STRESS_FROM_STATUS(status) uint8_t((status) & EDT2_STRESS_0F_MASK)
|
|
#define EDT2_ERROR_BIT_FROM_STATUS(status) bool((status) & EDT2_ERROR_MASK)
|
|
#define EDT2_WARNING_BIT_FROM_STATUS(status) bool((status) & EDT2_WARNING_MASK)
|
|
#define EDT2_ALERT_BIT_FROM_STATUS(status) bool((status) & EDT2_ALERT_MASK)
|
|
#define EDT2_STRESS_FROM_STRESS(stress) uint8_t((stress) & EDT2_STRESS_FF_MASK)
|
|
|
|
uint16_t AP_ESC_Telem::merge_edt2_status(uint16_t old_status, uint16_t new_status)
|
|
{
|
|
if (EDT2_HAS_NEW_DATA(old_status)) {
|
|
new_status = uint16_t(
|
|
(old_status & ~EDT2_STRESS_0F_MASK) | // old status except for the stress is preserved
|
|
(new_status & EDT2_ALL_BITS) | // all new status bits are included
|
|
MAX(old_status & EDT2_STRESS_0F_MASK, new_status & EDT2_STRESS_0F_MASK) // the stress is maxed out
|
|
);
|
|
}
|
|
return EDT2_TELEM_UPDATED | new_status;
|
|
}
|
|
|
|
uint16_t AP_ESC_Telem::merge_edt2_stress(uint16_t old_stress, uint16_t new_stress)
|
|
{
|
|
if (EDT2_HAS_NEW_DATA(old_stress)) {
|
|
new_stress = uint16_t(
|
|
MAX(old_stress & EDT2_STRESS_FF_MASK, new_stress & EDT2_STRESS_FF_MASK) // the stress is maxed out
|
|
);
|
|
}
|
|
return EDT2_TELEM_UPDATED | new_stress;
|
|
}
|
|
|
|
#endif // AP_EXTENDED_DSHOT_TELEM_V2_ENABLED
|
|
|
|
void AP_ESC_Telem::update()
|
|
{
|
|
#if HAL_LOGGING_ENABLED
|
|
AP_Logger *logger = AP_Logger::get_singleton();
|
|
const uint64_t now_us64 = AP_HAL::micros64();
|
|
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
const volatile AP_ESC_Telem_Backend::RpmData &rpmdata = _rpm_data[i];
|
|
volatile AP_ESC_Telem_Backend::TelemetryData &telemdata = _telem_data[i];
|
|
// Push received telemetry data into the logging system
|
|
if (logger && logger->logging_enabled()) {
|
|
if (telemdata.last_update_ms != _last_telem_log_ms[i]
|
|
|| rpmdata.last_update_us != _last_rpm_log_us[i]) {
|
|
|
|
// Update last log timestamps
|
|
_last_telem_log_ms[i] = telemdata.last_update_ms;
|
|
_last_rpm_log_us[i] = rpmdata.last_update_us;
|
|
|
|
float rpm = AP::logger().quiet_nanf();
|
|
get_rpm(i, rpm);
|
|
float raw_rpm = AP::logger().quiet_nanf();
|
|
get_raw_rpm(i, raw_rpm);
|
|
|
|
// Write ESC status messages
|
|
// id starts from 0
|
|
// rpm, raw_rpm is eRPM (in RPM units)
|
|
// voltage is in Volt
|
|
// current is in Ampere
|
|
// esc_temp is in centi-degrees Celsius
|
|
// current_tot is in milli-Ampere hours
|
|
// motor_temp is in centi-degrees Celsius
|
|
// error_rate is in percentage
|
|
const struct log_Esc pkt{
|
|
LOG_PACKET_HEADER_INIT(uint8_t(LOG_ESC_MSG)),
|
|
time_us : now_us64,
|
|
instance : i,
|
|
rpm : rpm,
|
|
raw_rpm : raw_rpm,
|
|
voltage : telemdata.voltage,
|
|
current : telemdata.current,
|
|
esc_temp : telemdata.temperature_cdeg,
|
|
current_tot : telemdata.consumption_mah,
|
|
motor_temp : telemdata.motor_temp_cdeg,
|
|
error_rate : rpmdata.error_rate
|
|
};
|
|
AP::logger().WriteBlock(&pkt, sizeof(pkt));
|
|
|
|
#if AP_EXTENDED_ESC_TELEM_ENABLED
|
|
// Write ESC extended status messages
|
|
// id: starts from 0
|
|
// input duty: duty cycle input to the ESC in percent
|
|
// output duty: duty cycle output to the motor in percent
|
|
// status flags: manufacurer-specific status flags
|
|
const bool has_ext_data = telemdata.types &
|
|
(AP_ESC_Telem_Backend::TelemetryType::INPUT_DUTY |
|
|
AP_ESC_Telem_Backend::TelemetryType::OUTPUT_DUTY |
|
|
AP_ESC_Telem_Backend::TelemetryType::FLAGS |
|
|
AP_ESC_Telem_Backend::TelemetryType::POWER_PERCENTAGE);
|
|
if (has_ext_data) {
|
|
// @LoggerMessage: ESCX
|
|
// @Description: ESC extended telemetry data
|
|
// @Field: TimeUS: Time since system startup
|
|
// @Field: Instance: starts from 0
|
|
// @Field: inpct: input duty cycle in percent
|
|
// @Field: outpct: output duty cycle in percent
|
|
// @Field: flags: manufacturer-specific status flags
|
|
// @Field: Pwr: Power percentage
|
|
AP::logger().WriteStreaming("ESCX",
|
|
"TimeUS,Instance,inpct,outpct,flags,Pwr",
|
|
"s" "#" "%" "%" "-" "%",
|
|
"F" "-" "-" "-" "-" "-",
|
|
"Q" "B" "B" "B" "I" "B",
|
|
AP_HAL::micros64(),
|
|
i,
|
|
telemdata.input_duty,
|
|
telemdata.output_duty,
|
|
telemdata.flags,
|
|
telemdata.power_percentage);
|
|
}
|
|
#endif //AP_EXTENDED_ESC_TELEM_ENABLED
|
|
|
|
#if AP_EXTENDED_DSHOT_TELEM_V2_ENABLED
|
|
// Write an EDTv2 message, if there is any update
|
|
uint16_t edt2_status = telemdata.edt2_status;
|
|
uint16_t edt2_stress = telemdata.edt2_stress;
|
|
if (EDT2_HAS_NEW_DATA(edt2_status | edt2_stress)) {
|
|
// Could probably be faster/smaller with bitmasking, but not sure
|
|
uint8_t status = 0;
|
|
if (EDT2_HAS_NEW_DATA(edt2_stress)) {
|
|
status |= uint8_t(log_Edt2_Status::HAS_STRESS_DATA);
|
|
}
|
|
if (EDT2_HAS_NEW_DATA(edt2_status)) {
|
|
status |= uint8_t(log_Edt2_Status::HAS_STATUS_DATA);
|
|
}
|
|
if (EDT2_ALERT_BIT_FROM_STATUS(edt2_status)) {
|
|
status |= uint8_t(log_Edt2_Status::ALERT_BIT);
|
|
}
|
|
if (EDT2_WARNING_BIT_FROM_STATUS(edt2_status)) {
|
|
status |= uint8_t(log_Edt2_Status::WARNING_BIT);
|
|
}
|
|
if (EDT2_ERROR_BIT_FROM_STATUS(edt2_status)) {
|
|
status |= uint8_t(log_Edt2_Status::ERROR_BIT);
|
|
}
|
|
// An EDT2 status message is:
|
|
// id: starts from 0
|
|
// stress: the current stress which comes from edt2_stress
|
|
// max_stress: the maximum stress which comes from edt2_status
|
|
// status: the status bits which come from both
|
|
const struct log_Edt2 pkt_edt2{
|
|
LOG_PACKET_HEADER_INIT(uint8_t(LOG_EDT2_MSG)),
|
|
time_us : now_us64,
|
|
instance : i,
|
|
stress : EDT2_STRESS_FROM_STRESS(edt2_stress),
|
|
max_stress : EDT2_STRESS_FROM_STATUS(edt2_status),
|
|
status : status,
|
|
};
|
|
if (AP::logger().WriteBlock_first_succeed(&pkt_edt2, sizeof(pkt_edt2))) {
|
|
// Only clean the telem_updated bits if the write succeeded.
|
|
// This is important because, if rate limiting is enabled,
|
|
// the log-on-change behavior may lose a lot of entries
|
|
telemdata.edt2_status &= ~EDT2_TELEM_UPDATED;
|
|
telemdata.edt2_stress &= ~EDT2_TELEM_UPDATED;
|
|
}
|
|
}
|
|
#endif // AP_EXTENDED_DSHOT_TELEM_V2_ENABLED
|
|
}
|
|
}
|
|
}
|
|
#endif // HAL_LOGGING_ENABLED
|
|
|
|
const uint32_t now_us = AP_HAL::micros();
|
|
for (uint8_t i = 0; i < ESC_TELEM_MAX_ESCS; i++) {
|
|
// Invalidate RPM data if not received for too long
|
|
if ((now_us - _rpm_data[i].last_update_us) > ESC_RPM_DATA_TIMEOUT_US) {
|
|
_rpm_data[i].data_valid = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
bool AP_ESC_Telem::rpm_data_within_timeout(const volatile AP_ESC_Telem_Backend::RpmData &instance, const uint32_t now_us, const uint32_t timeout_us)
|
|
{
|
|
// easy case, has the time window been crossed so it's invalid
|
|
if ((now_us - instance.last_update_us) > timeout_us) {
|
|
return false;
|
|
}
|
|
// we never got a valid data, to it's invalid
|
|
if (instance.last_update_us == 0) {
|
|
return false;
|
|
}
|
|
// check if things generally expired on us, this is done to handle time wrapping
|
|
return instance.data_valid;
|
|
}
|
|
|
|
bool AP_ESC_Telem::was_rpm_data_ever_reported(const volatile AP_ESC_Telem_Backend::RpmData &instance)
|
|
{
|
|
return instance.last_update_us > 0;
|
|
}
|
|
|
|
#if AP_SCRIPTING_ENABLED
|
|
/*
|
|
set RPM scale factor from script
|
|
*/
|
|
void AP_ESC_Telem::set_rpm_scale(const uint8_t esc_index, const float scale_factor)
|
|
{
|
|
if (esc_index < ESC_TELEM_MAX_ESCS) {
|
|
rpm_scale_factor[esc_index] = scale_factor;
|
|
rpm_scale_mask |= (1U<<esc_index);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
AP_ESC_Telem *AP_ESC_Telem::_singleton = nullptr;
|
|
|
|
/*
|
|
* Get the AP_ESC_Telem singleton
|
|
*/
|
|
AP_ESC_Telem *AP_ESC_Telem::get_singleton()
|
|
{
|
|
return AP_ESC_Telem::_singleton;
|
|
}
|
|
|
|
namespace AP {
|
|
|
|
AP_ESC_Telem &esc_telem()
|
|
{
|
|
return *AP_ESC_Telem::get_singleton();
|
|
}
|
|
|
|
};
|
|
|
|
#endif // HAL_WITH_ESC_TELEM
|