mirror of https://github.com/ArduPilot/ardupilot
226 lines
7.1 KiB
C++
226 lines
7.1 KiB
C++
/*
|
||
This program is free software: you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation, either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
*/
|
||
#include "AP_Compass_MAG3110.h"
|
||
|
||
#if AP_COMPASS_MAG3110_ENABLED
|
||
|
||
#include <utility>
|
||
|
||
#include <AP_HAL/AP_HAL.h>
|
||
#include <AP_Math/AP_Math.h>
|
||
#include <stdio.h>
|
||
|
||
extern const AP_HAL::HAL &hal;
|
||
|
||
|
||
/*
|
||
EN:
|
||
at first glance, the magnetometer MAG3110 consists only of flaws:
|
||
* noisy, with a bad characteristic, with very large difference on axes
|
||
* it can't be calibrated in any way, you just have to believe what he has been measured
|
||
* There are no adjustments and settings, it just sends data with some unknown sensitivity. Or does not sends :)
|
||
* One and a half setup registers, in which only the frequency of operation and the number of averagings are specified
|
||
|
||
This is a device, wooden to the waist. But of all these shortcomings, its sole and basic virtue arises:
|
||
* He will never comes buggy or clevers.
|
||
|
||
And since we do not need much from a magnetometer and it is required to calibrate the Ardupilot itself, the device
|
||
appears in a completely new light - as a reliable info "north is there." What we really need.
|
||
|
||
RUS:
|
||
на первый взгляд, магнитометр MAG3110 состоит из одних лишь недостатков:
|
||
* шумный, с кривой характеристикой,
|
||
* никак не калибруется, приходится просто верить тому что он намерял
|
||
* нет никаких регулировок и настроек, он просто выдает данные с некой неизвестной чувствительностью. Или не выдает :)
|
||
* полтора настроечных регистра, в которых задается только частота работы и количество усреднений
|
||
|
||
Такой вот девайс, по пояс деревянный. Но из всех этих недостатков проистекает его единственное и основное достоинство:
|
||
* он никогда не глючит и не умничает.
|
||
|
||
А так как нам от магнитометра особо много и не требуется, а калибровать Ардупилот и сам умеет, то девайс
|
||
предстает в совсем новом свете - как надежный указатель "север там". Что нам собственно и надо.
|
||
|
||
*/
|
||
|
||
/*
|
||
the vector length filter can help with noise on the bus, but may
|
||
interfere with higher level processing. It should really be moved
|
||
into the AP_Compass_backend code, with a parameter to enable it.
|
||
*/
|
||
#ifndef MAG3110_ENABLE_LEN_FILTER
|
||
#define MAG3110_ENABLE_LEN_FILTER 0
|
||
#endif
|
||
|
||
|
||
// Registers
|
||
#define MAG3110_MAG_REG_STATUS 0x00
|
||
#define MAG3110_MAG_REG_HXL 0x01
|
||
#define MAG3110_MAG_REG_HXH 0x02
|
||
#define MAG3110_MAG_REG_HYL 0x03
|
||
#define MAG3110_MAG_REG_HYH 0x04
|
||
#define MAG3110_MAG_REG_HZL 0x05
|
||
#define MAG3110_MAG_REG_HZH 0x06
|
||
#define MAG3110_MAG_REG_WHO_AM_I 0x07
|
||
#define MAG3110_MAG_REG_SYSMODE 0x08
|
||
#define MAG3110_MAG_REG_CTRL_REG1 0x10
|
||
#define MAG3110_MAG_REG_CTRL_REG2 0x11
|
||
|
||
#define BIT_STATUS_REG_DATA_READY (1 << 3)
|
||
|
||
|
||
|
||
|
||
AP_Compass_MAG3110::AP_Compass_MAG3110(AP_HAL::OwnPtr<AP_HAL::Device> dev)
|
||
: _dev(std::move(dev))
|
||
{
|
||
}
|
||
|
||
AP_Compass_Backend *AP_Compass_MAG3110::probe(AP_HAL::OwnPtr<AP_HAL::Device> dev,
|
||
enum Rotation rotation)
|
||
{
|
||
if (!dev) {
|
||
return nullptr;
|
||
}
|
||
AP_Compass_MAG3110 *sensor = NEW_NOTHROW AP_Compass_MAG3110(std::move(dev));
|
||
if (!sensor || !sensor->init(rotation)) {
|
||
delete sensor;
|
||
return nullptr;
|
||
}
|
||
|
||
return sensor;
|
||
}
|
||
|
||
|
||
bool AP_Compass_MAG3110::init(enum Rotation rotation)
|
||
{
|
||
|
||
bool success = _hardware_init();
|
||
|
||
if (!success) {
|
||
return false;
|
||
}
|
||
|
||
_initialised = true;
|
||
|
||
// perform an initial read
|
||
read();
|
||
|
||
/* register the compass instance in the frontend */
|
||
_dev->set_device_type(DEVTYPE_MAG3110);
|
||
if (!register_compass(_dev->get_bus_id(), _compass_instance)) {
|
||
return false;
|
||
}
|
||
set_dev_id(_compass_instance, _dev->get_bus_id());
|
||
|
||
set_rotation(_compass_instance, rotation);
|
||
|
||
set_external(_compass_instance, true);
|
||
|
||
// read at 75Hz
|
||
_dev->register_periodic_callback(13333, FUNCTOR_BIND_MEMBER(&AP_Compass_MAG3110::_update, void));
|
||
|
||
return true;
|
||
}
|
||
|
||
bool AP_Compass_MAG3110::_hardware_init()
|
||
{
|
||
|
||
AP_HAL::Semaphore *bus_sem = _dev->get_semaphore();
|
||
bus_sem->take_blocking();
|
||
|
||
// initially run the bus at low speed
|
||
_dev->set_speed(AP_HAL::Device::SPEED_LOW);
|
||
|
||
bool ret=false;
|
||
|
||
_dev->set_retries(5);
|
||
|
||
uint8_t sig = 0;
|
||
bool ack = _dev->read_registers(MAG3110_MAG_REG_WHO_AM_I, &sig, 1);
|
||
if (!ack || sig != 0xC4) goto exit;
|
||
|
||
ack = _dev->write_register(MAG3110_MAG_REG_CTRL_REG1, 0x01); // active mode 80 Hz ODR with OSR = 1
|
||
if (!ack) goto exit;
|
||
|
||
hal.scheduler->delay(20);
|
||
|
||
ack = _dev->write_register(MAG3110_MAG_REG_CTRL_REG2, 0xA0); // AUTO_MRST_EN + RAW
|
||
if (!ack) goto exit;
|
||
|
||
ret = true;
|
||
|
||
_dev->set_retries(3);
|
||
|
||
printf("MAG3110 found on bus 0x%x\n", (uint16_t)_dev->get_bus_id());
|
||
|
||
exit:
|
||
_dev->set_speed(AP_HAL::Device::SPEED_HIGH);
|
||
bus_sem->give();
|
||
return ret;
|
||
}
|
||
|
||
|
||
// Read Sensor data
|
||
bool AP_Compass_MAG3110::_read_sample()
|
||
{
|
||
{
|
||
uint8_t status;
|
||
bool ack = _dev->read_registers(MAG3110_MAG_REG_STATUS, &status, 1);
|
||
|
||
if (!ack || (status & BIT_STATUS_REG_DATA_READY) == 0) {
|
||
return false;
|
||
}
|
||
}
|
||
|
||
uint8_t buf[6];
|
||
bool ack = _dev->read_registers(MAG3110_MAG_REG_HXL, buf, 6);
|
||
if (!ack) {
|
||
return false;
|
||
}
|
||
|
||
_mag_x = (int16_t)(buf[0] << 8 | buf[1]);
|
||
_mag_y = (int16_t)(buf[2] << 8 | buf[3]);
|
||
_mag_z = (int16_t)(buf[4] << 8 | buf[5]);
|
||
|
||
return true;
|
||
}
|
||
|
||
|
||
#define MAG_SCALE (1.0f/10000 / 0.0001f * 1000) // 1 Tesla full scale of +-10000, 1 Gauss = 0,0001 Tesla, library needs milliGauss
|
||
|
||
void AP_Compass_MAG3110::_update()
|
||
{
|
||
if (!_read_sample()) {
|
||
return;
|
||
}
|
||
|
||
Vector3f raw_field = Vector3f((float)_mag_x, (float)_mag_y, (float)_mag_z) * MAG_SCALE;
|
||
|
||
accumulate_sample(raw_field, _compass_instance);
|
||
}
|
||
|
||
|
||
// Read Sensor data
|
||
void AP_Compass_MAG3110::read()
|
||
{
|
||
if (!_initialised) {
|
||
return;
|
||
}
|
||
|
||
drain_accumulated_samples(_compass_instance);
|
||
}
|
||
|
||
#endif // AP_COMPASS_MAG3110_ENABLED
|