mirror of https://github.com/ArduPilot/ardupilot
237 lines
7.9 KiB
C++
237 lines
7.9 KiB
C++
#include "AP_BattMonitor_AD7091R5.h"
|
|
|
|
/**
|
|
* @brief You can use it to Read Current and voltage of 1-3 batteries from a ADC extender IC over I2C.
|
|
* AD7091R5 is a ADC extender and we are using it to read current and voltage of multiple batteries.
|
|
* Examples of Pin combination:
|
|
* 1)Pin 50 = Voltage 51,52,53 = Current. For 3 battery combination Voltage will be same accross.
|
|
* 2)Pin 50,51 = Voltage and Current Battery 1 - Pin 52,53 = Voltage and Current Battery 2
|
|
* Only the First instance of Battery Monitor will be reading the values from IC over I2C.
|
|
* Make sure you understand the method of calculation used in this driver before using it.
|
|
* e.g. using pin 1 on IC to read voltage of 2 batteries and pin 2 and 3 to read current from individual battery.
|
|
* Pin number represents 50 = pin 1, 51 = pin 2 and so on 52, 53
|
|
* BATT2_Monitor = 24 , BATT3_Monitor = 24
|
|
* BATT2_VOLT_PIN = 50 , BATT3_VOLT_PIN = 50
|
|
* BATT2_CURR_PIN = 51 , BATT3_CURR_PIN = 52
|
|
*
|
|
*
|
|
*/
|
|
|
|
#if AP_BATTERY_AD7091R5_ENABLED
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <AP_Common/AP_Common.h>
|
|
#include <AP_Math/AP_Math.h>
|
|
|
|
//macro defines
|
|
#define AD7091R5_I2C_ADDR 0x2F // A0 and A1 tied to GND
|
|
#define AD7091R5_I2C_BUS 0
|
|
#define AD7091R5_RESET 0x02
|
|
#define AD7091R5_RESULT_ADDR 0x00
|
|
#define AD7091R5_CHAN_ADDR 0x01
|
|
#define AD7091R5_CONF_ADDR 0x02
|
|
#define AD7091R5_CH_ID(x) ((x >> 5) & 0x03)
|
|
#define AD7091R5_RES_MASK 0x0F
|
|
#define AD7091R5_REF 3.3f
|
|
#define AD7091R5_RESOLUTION (float)4096
|
|
#define AD7091R5_PERIOD_USEC 100000
|
|
#define AD7091R5_BASE_PIN 50
|
|
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
const AP_Param::GroupInfo AP_BattMonitor_AD7091R5::var_info[] = {
|
|
|
|
// @Param: VOLT_PIN
|
|
// @DisplayName: Battery Voltage sensing pin on the AD7091R5 Ic
|
|
// @Description: Sets the analog input pin that should be used for voltage monitoring on AD7091R5.
|
|
// @Values: -1:Disabled
|
|
// @User: Standard
|
|
// @RebootRequired: True
|
|
AP_GROUPINFO("VOLT_PIN", 56, AP_BattMonitor_AD7091R5, _volt_pin, 0),
|
|
|
|
// @Param: CURR_PIN
|
|
// @DisplayName: Battery Current sensing pin
|
|
// @Description: Sets the analog input pin that should be used for Current monitoring on AD7091R5.
|
|
// @Values: -1:Disabled
|
|
// @User: Standard
|
|
// @RebootRequired: True
|
|
AP_GROUPINFO("CURR_PIN", 57, AP_BattMonitor_AD7091R5, _curr_pin, 0),
|
|
|
|
// @Param: VOLT_MULT
|
|
// @DisplayName: Voltage Multiplier
|
|
// @Description: Used to convert the voltage of the voltage sensing pin (@PREFIX@VOLT_PIN) to the actual battery's voltage (pin_voltage * VOLT_MULT).
|
|
// @User: Advanced
|
|
AP_GROUPINFO("VOLT_MULT", 58, AP_BattMonitor_AD7091R5, _volt_multiplier, 0),
|
|
|
|
// @Param: AMP_PERVLT
|
|
// @DisplayName: Amps per volt
|
|
// @Description: Number of amps that a 1V reading on the current sensor corresponds to.
|
|
// @Units: A/V
|
|
// @User: Standard
|
|
AP_GROUPINFO("AMP_PERVLT", 59, AP_BattMonitor_AD7091R5, _curr_amp_per_volt, 0),
|
|
|
|
// @Param: AMP_OFFSET
|
|
// @DisplayName: AMP offset
|
|
// @Description: Voltage offset at zero current on current sensor
|
|
// @Units: V
|
|
// @User: Standard
|
|
AP_GROUPINFO("AMP_OFFSET", 60, AP_BattMonitor_AD7091R5, _curr_amp_offset, 0),
|
|
|
|
// @Param: VLT_OFFSET
|
|
// @DisplayName: Volage offset
|
|
// @Description: Voltage offset on voltage pin. This allows for an offset due to a diode. This voltage is subtracted before the scaling is applied
|
|
// @Units: V
|
|
// @User: Advanced
|
|
AP_GROUPINFO("VLT_OFFSET", 61, AP_BattMonitor_AD7091R5, _volt_offset, 0),
|
|
|
|
// CHECK/UPDATE INDEX TABLE IN AP_BattMonitor_Backend.cpp WHEN CHANGING OR ADDING PARAMETERS
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
|
|
//Variable initialised to read from first instance.
|
|
AP_BattMonitor_AD7091R5::AnalogData AP_BattMonitor_AD7091R5::_analog_data[AD7091R5_NO_OF_CHANNELS];
|
|
bool AP_BattMonitor_AD7091R5::_first = true;
|
|
bool AP_BattMonitor_AD7091R5::_health = false;
|
|
|
|
/**
|
|
* @brief Construct a new ap battmonitor ad7091r5::ap battmonitor ad7091r5 object
|
|
*
|
|
* @param mon
|
|
* @param mon_state
|
|
* @param params
|
|
*/
|
|
AP_BattMonitor_AD7091R5::AP_BattMonitor_AD7091R5(AP_BattMonitor &mon,
|
|
AP_BattMonitor::BattMonitor_State &mon_state,
|
|
AP_BattMonitor_Params ¶ms) :
|
|
AP_BattMonitor_Backend(mon, mon_state, params)
|
|
{
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
_state.var_info = var_info;
|
|
}
|
|
|
|
/**
|
|
* @brief probe and initialize the sensor and register call back
|
|
*
|
|
*/
|
|
void AP_BattMonitor_AD7091R5::init()
|
|
{
|
|
// voltage and current pins from params and check if there are in range
|
|
if (_volt_pin.get() >= AD7091R5_BASE_PIN && _volt_pin.get() <= AD7091R5_BASE_PIN + AD7091R5_NO_OF_CHANNELS &&
|
|
_curr_pin.get() >= AD7091R5_BASE_PIN && _curr_pin.get() <= AD7091R5_BASE_PIN + AD7091R5_NO_OF_CHANNELS) {
|
|
volt_buff_pt = _volt_pin.get() - AD7091R5_BASE_PIN;
|
|
curr_buff_pt = _curr_pin.get() - AD7091R5_BASE_PIN;
|
|
}
|
|
else{
|
|
return; //pin values are out of range
|
|
}
|
|
|
|
// only the first instance read the i2c device
|
|
if (_first) {
|
|
_first = false;
|
|
// probe i2c device
|
|
_dev = hal.i2c_mgr->get_device(AD7091R5_I2C_BUS, AD7091R5_I2C_ADDR);
|
|
|
|
if (_dev) {
|
|
WITH_SEMAPHORE(_dev->get_semaphore());
|
|
_dev->set_retries(10); // lots of retries during probe
|
|
//Reset and config device
|
|
if (_initialize()) {
|
|
_dev->set_retries(2); // drop to 2 retries for runtime
|
|
_dev->register_periodic_callback(AD7091R5_PERIOD_USEC, FUNCTOR_BIND_MEMBER(&AP_BattMonitor_AD7091R5::_read_adc, void));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief read - read the voltage and curren
|
|
*
|
|
*/
|
|
void AP_BattMonitor_AD7091R5::read()
|
|
{
|
|
|
|
WITH_SEMAPHORE(sem);
|
|
//copy global health status to all instances
|
|
_state.healthy = _health;
|
|
|
|
//return if system not healthy
|
|
if (!_state.healthy) {
|
|
return;
|
|
}
|
|
|
|
//voltage conversion
|
|
_state.voltage = (_data_to_volt(_analog_data[volt_buff_pt].data) - _volt_offset) * _volt_multiplier;
|
|
|
|
//current amps conversion
|
|
_state.current_amps = (_data_to_volt(_analog_data[curr_buff_pt].data) - _curr_amp_offset) * _curr_amp_per_volt;
|
|
|
|
// calculate time since last current read
|
|
uint32_t tnow = AP_HAL::micros();
|
|
uint32_t dt_us = tnow - _state.last_time_micros;
|
|
|
|
// update total current drawn since startup
|
|
update_consumed(_state, dt_us);
|
|
|
|
// record time
|
|
_state.last_time_micros = tnow;
|
|
}
|
|
|
|
/**
|
|
* @brief read all four channels and store the results
|
|
*
|
|
*/
|
|
void AP_BattMonitor_AD7091R5::_read_adc()
|
|
{
|
|
uint8_t data[AD7091R5_NO_OF_CHANNELS*2];
|
|
//reset and reconfigure IC if health status is not good.
|
|
if (!_state.healthy) {
|
|
_initialize();
|
|
}
|
|
//read value
|
|
bool ret = _dev->transfer(nullptr, 0, data, sizeof(data));
|
|
WITH_SEMAPHORE(sem);
|
|
if (ret) {
|
|
for (int i=0; i<AD7091R5_NO_OF_CHANNELS; i++) {
|
|
uint8_t chan = AD7091R5_CH_ID(data[2*i]);
|
|
_analog_data[chan].data = ((uint16_t)(data[2*i]&AD7091R5_RES_MASK)<<8) | data[2*i+1];
|
|
}
|
|
_health = true;
|
|
} else {
|
|
_health = false;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief config the adc
|
|
*
|
|
* @return true
|
|
* @return false
|
|
*/
|
|
bool AP_BattMonitor_AD7091R5::_initialize()
|
|
{
|
|
//reset the device
|
|
uint8_t data[3] = {AD7091R5_CONF_ADDR, AD7091R5_CONF_CMD | AD7091R5_RESET, AD7091R5_CONF_PDOWN0};
|
|
|
|
if(_dev->transfer(data, sizeof(data), nullptr, 0)){
|
|
//command mode, use external 3.3 reference, all channels enabled, set address pointer register to read the adc results
|
|
uint8_t data_2[6] = {AD7091R5_CONF_ADDR, AD7091R5_CONF_CMD, AD7091R5_CONF_PDOWN0, AD7091R5_CHAN_ADDR, AD7091R5_CHAN_ALL, AD7091R5_RESULT_ADDR};
|
|
return _dev->transfer(data_2, sizeof(data_2), nullptr, 0);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* @brief convert binary reading to volts
|
|
*
|
|
* @param data
|
|
* @return float
|
|
*/
|
|
float AP_BattMonitor_AD7091R5::_data_to_volt(uint32_t data)
|
|
{
|
|
return (AD7091R5_REF/AD7091R5_RESOLUTION)*data;
|
|
}
|
|
|
|
#endif // AP_BATTERY_AD7091R5_ENABLED
|