ardupilot/Tools/AP_Periph/adsb.cpp

152 lines
5.3 KiB
C++

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
AP_Periph ADSB support. This is designed to talk to a Ping ADSB
module over the UART
*/
#include <AP_HAL/AP_HAL_Boards.h>
#include "AP_Periph.h"
#ifdef HAL_PERIPH_ENABLE_ADSB
#include <AP_SerialManager/AP_SerialManager.h>
#include <dronecan_msgs.h>
extern const AP_HAL::HAL &hal;
/*
init ADSB support
*/
void AP_Periph_FW::adsb_init(void)
{
if (g.adsb_baudrate > 0) {
auto *uart = hal.serial(g.adsb_port);
if (uart == nullptr) {
return;
}
uart->begin(AP_SerialManager::map_baudrate(g.adsb_baudrate), 256, 256);
}
}
/*
update ADSB subsystem
*/
void AP_Periph_FW::adsb_update(void)
{
if (g.adsb_baudrate <= 0) {
return;
}
auto *uart = hal.serial(g.adsb_port);
if (uart == nullptr) {
return;
}
// look for incoming MAVLink ADSB_VEHICLE packets
const uint16_t nbytes = uart->available();
for (uint16_t i=0; i<nbytes; i++) {
const uint8_t c = (uint8_t)uart->read();
// Try to get a new message
if (mavlink_frame_char_buffer(&adsb.msg, &adsb.status, c, &adsb.msg, &adsb.status) == MAVLINK_FRAMING_OK) {
if (adsb.msg.msgid == MAVLINK_MSG_ID_ADSB_VEHICLE) {
// decode and send as UAVCAN TrafficReport
static mavlink_adsb_vehicle_t msg;
mavlink_msg_adsb_vehicle_decode(&adsb.msg, &msg);
can_send_ADSB(msg);
}
}
}
/*
some ADSB devices need a heartbeat to get the system ID
*/
const uint32_t now_ms = AP_HAL::millis();
if (now_ms - adsb.last_heartbeat_ms >= 1000) {
adsb.last_heartbeat_ms = now_ms;
mavlink_heartbeat_t heartbeat {};
mavlink_message_t msg;
heartbeat.type = MAV_TYPE_GENERIC;
heartbeat.autopilot = MAV_AUTOPILOT_ARDUPILOTMEGA;
auto len = mavlink_msg_heartbeat_encode_status(1,
MAV_COMP_ID_PERIPHERAL,
&adsb.status,
&msg, &heartbeat);
uart->write((uint8_t*)&msg.magic, len);
}
}
/*
map an ADSB_VEHICLE MAVLink message to a UAVCAN TrafficReport message
*/
void AP_Periph_FW::can_send_ADSB(struct __mavlink_adsb_vehicle_t &msg)
{
ardupilot_equipment_trafficmonitor_TrafficReport pkt {};
pkt.timestamp.usec = 0;
pkt.icao_address = msg.ICAO_address;
pkt.tslc = msg.tslc;
pkt.latitude_deg_1e7 = msg.lat;
pkt.longitude_deg_1e7 = msg.lon;
pkt.alt_m = msg.altitude * 1e-3;
pkt.heading = radians(msg.heading * 1e-2);
pkt.velocity[0] = cosf(pkt.heading) * msg.hor_velocity * 1e-2;
pkt.velocity[1] = sinf(pkt.heading) * msg.hor_velocity * 1e-2;
pkt.velocity[2] = -msg.ver_velocity * 1e-2;
pkt.squawk = msg.squawk;
memcpy(pkt.callsign, msg.callsign, MIN(sizeof(msg.callsign),sizeof(pkt.callsign)));
if (msg.flags & 0x8000) {
pkt.source = ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_SOURCE_ADSB_UAT;
} else {
pkt.source = ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_SOURCE_ADSB;
}
pkt.traffic_type = msg.emitter_type;
if ((msg.flags & ADSB_FLAGS_VALID_ALTITUDE) != 0 && msg.altitude_type == 0) {
pkt.alt_type = ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_ALT_TYPE_PRESSURE_AMSL;
} else if ((msg.flags & ADSB_FLAGS_VALID_ALTITUDE) != 0 && msg.altitude_type == 1) {
pkt.alt_type = ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_ALT_TYPE_WGS84;
} else {
pkt.alt_type = ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_ALT_TYPE_ALT_UNKNOWN;
}
pkt.lat_lon_valid = (msg.flags & ADSB_FLAGS_VALID_COORDS) != 0;
pkt.heading_valid = (msg.flags & ADSB_FLAGS_VALID_HEADING) != 0;
pkt.velocity_valid = (msg.flags & ADSB_FLAGS_VALID_VELOCITY) != 0;
pkt.callsign_valid = (msg.flags & ADSB_FLAGS_VALID_CALLSIGN) != 0;
pkt.ident_valid = (msg.flags & ADSB_FLAGS_VALID_SQUAWK) != 0;
pkt.simulated_report = (msg.flags & ADSB_FLAGS_SIMULATED) != 0;
// these flags are not in common.xml
pkt.vertical_velocity_valid = (msg.flags & 0x0080) != 0;
pkt.baro_valid = (msg.flags & 0x0100) != 0;
uint8_t buffer[ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_MAX_SIZE];
uint16_t total_size = ardupilot_equipment_trafficmonitor_TrafficReport_encode(&pkt, buffer, !periph.canfdout());
canard_broadcast(ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_SIGNATURE,
ARDUPILOT_EQUIPMENT_TRAFFICMONITOR_TRAFFICREPORT_ID,
CANARD_TRANSFER_PRIORITY_LOWEST,
&buffer[0],
total_size);
}
#endif // HAL_PERIPH_ENABLE_ADSB