mirror of https://github.com/ArduPilot/ardupilot
119 lines
5.1 KiB
C++
119 lines
5.1 KiB
C++
#pragma once
|
|
|
|
#include "AP_BattMonitor.h"
|
|
#include "AP_BattMonitor_Backend.h"
|
|
|
|
// default pins and dividers
|
|
#if defined(HAL_BATT_VOLT_PIN)
|
|
// pins defined in board config (hwdef.dat on ChibiOS)
|
|
# define AP_BATT_VOLT_PIN HAL_BATT_VOLT_PIN
|
|
# define AP_BATT_CURR_PIN HAL_BATT_CURR_PIN
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT HAL_BATT_VOLT_SCALE
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT HAL_BATT_CURR_SCALE
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_CHIBIOS
|
|
# define AP_BATT_VOLT_PIN 4
|
|
# define AP_BATT_CURR_PIN 3
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_SITL
|
|
# define AP_BATT_VOLT_PIN 13
|
|
# define AP_BATT_CURR_PIN 12
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && (CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_ERLEBOARD || CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_PXF)
|
|
# define AP_BATT_VOLT_PIN 5
|
|
# define AP_BATT_CURR_PIN 6
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BBBMINI
|
|
# define AP_BATT_VOLT_PIN 0
|
|
# define AP_BATT_CURR_PIN 1
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BLUE
|
|
# define AP_BATT_VOLT_PIN 0
|
|
# define AP_BATT_CURR_PIN 1
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_POCKET
|
|
# define AP_BATT_VOLT_PIN 1
|
|
# define AP_BATT_CURR_PIN 0
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && (CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO || CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO2)
|
|
# define AP_BATT_VOLT_PIN 2
|
|
# define AP_BATT_CURR_PIN 3
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 11.3f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && (CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIGATOR)
|
|
# define AP_BATT_VOLT_PIN 5
|
|
# define AP_BATT_CURR_PIN 4
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 11.0f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 37.8788f
|
|
# define AP_BATT_CURR_AMP_OFFSET_DEFAULT 0.330f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && (CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_EDGE)
|
|
# define AP_BATT_VOLT_PIN 3
|
|
# define AP_BATT_CURR_PIN 2
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 18.62
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 62.98f
|
|
|
|
# define AP_BATT2_VOLT_PIN 5
|
|
# define AP_BATT2_CURR_PIN 4
|
|
# define AP_BATT2_VOLTDIVIDER_DEFAULT 18.62
|
|
# define AP_BATT2_CURR_AMP_PERVOLT_DEFAULT 62.98f
|
|
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && (CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_OBAL_V1)
|
|
# define AP_BATT_VOLT_PIN 0
|
|
# define AP_BATT_CURR_PIN 1
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
|
|
#else
|
|
# define AP_BATT_VOLT_PIN -1
|
|
# define AP_BATT_CURR_PIN -1
|
|
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
|
|
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
|
|
#endif
|
|
|
|
// This is 0 for the majority of the power modules.
|
|
#ifndef AP_BATT_CURR_AMP_OFFSET_DEFAULT
|
|
#define AP_BATT_CURR_AMP_OFFSET_DEFAULT 0.0f
|
|
#endif
|
|
|
|
// Other values normally set directly by mission planner
|
|
// # define AP_BATT_VOLTDIVIDER_DEFAULT 15.70 // Volt divider for AttoPilot 50V/90A sensor
|
|
// # define AP_BATT_VOLTDIVIDER_DEFAULT 4.127 // Volt divider for AttoPilot 13.6V/45A sensor
|
|
// # define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 27.32 // Amp/Volt for AttoPilot 50V/90A sensor
|
|
// # define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 13.66 // Amp/Volt for AttoPilot 13.6V/45A sensor
|
|
|
|
class AP_BattMonitor_Analog : public AP_BattMonitor_Backend
|
|
{
|
|
public:
|
|
|
|
/// Constructor
|
|
AP_BattMonitor_Analog(AP_BattMonitor &mon, AP_BattMonitor::BattMonitor_State &mon_state, AP_BattMonitor_Params ¶ms);
|
|
|
|
/// Read the battery voltage and current. Should be called at 10hz
|
|
void read() override;
|
|
|
|
/// returns true if battery monitor provides consumed energy info
|
|
bool has_consumed_energy() const override { return has_current(); }
|
|
|
|
/// returns true if battery monitor provides current info
|
|
bool has_current() const override;
|
|
|
|
void init(void) override {}
|
|
|
|
protected:
|
|
|
|
AP_HAL::AnalogSource *_volt_pin_analog_source;
|
|
AP_HAL::AnalogSource *_curr_pin_analog_source;
|
|
};
|