Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/ArduCopter/switches.cpp

771 lines
27 KiB
C++
Raw Permalink Blame History

#include "Copter.h"
#define CONTROL_SWITCH_DEBOUNCE_TIME_MS 200
//Documentation of Aux Switch Flags:
struct {
uint8_t CH6_flag : 2; // 0, 1 // ch6 aux switch : 0 is low or false, 1 is center or true, 2 is high
uint8_t CH7_flag : 2; // 2, 3 // ch7 aux switch : 0 is low or false, 1 is center or true, 2 is high
uint8_t CH8_flag : 2; // 4, 5 // ch8 aux switch : 0 is low or false, 1 is center or true, 2 is high
uint8_t CH9_flag : 2; // 6, 7 // ch9 aux switch : 0 is low or false, 1 is center or true, 2 is high
uint8_t CH10_flag : 2; // 8, 9 // ch10 aux switch : 0 is low or false, 1 is center or true, 2 is high
uint8_t CH11_flag : 2; // 10,11 // ch11 aux switch : 0 is low or false, 1 is center or true, 2 is high
uint8_t CH12_flag : 2; // 12,13 // ch12 aux switch : 0 is low or false, 1 is center or true, 2 is high
} aux_con;
void Copter::read_control_switch()
{
if (g.flight_mode_chan <= 0) {
// no flight mode channel
return;
}
uint32_t tnow_ms = millis();
// calculate position of flight mode switch
int8_t switch_position;
uint16_t mode_in = RC_Channels::rc_channel(g.flight_mode_chan-1)->get_radio_in();
if (mode_in < 1231) switch_position = 0;
else if (mode_in < 1361) switch_position = 1;
else if (mode_in < 1491) switch_position = 2;
else if (mode_in < 1621) switch_position = 3;
else if (mode_in < 1750) switch_position = 4;
else switch_position = 5;
// store time that switch last moved
if (control_switch_state.last_switch_position != switch_position) {
control_switch_state.last_edge_time_ms = tnow_ms;
}
// debounce switch
bool control_switch_changed = control_switch_state.debounced_switch_position != switch_position;
bool sufficient_time_elapsed = tnow_ms - control_switch_state.last_edge_time_ms > CONTROL_SWITCH_DEBOUNCE_TIME_MS;
bool failsafe_disengaged = !failsafe.radio && failsafe.radio_counter == 0;
if (control_switch_changed && sufficient_time_elapsed && failsafe_disengaged) {
// set flight mode and simple mode setting
if (set_mode((control_mode_t)flight_modes[switch_position].get(), MODE_REASON_TX_COMMAND)) {
// play a tone
if (control_switch_state.debounced_switch_position != -1) {
// alert user to mode change (except if autopilot is just starting up)
if (ap.initialised) {
AP_Notify::events.user_mode_change = 1;
}
}
if (!check_if_auxsw_mode_used(AUXSW_SIMPLE_MODE) && !check_if_auxsw_mode_used(AUXSW_SUPERSIMPLE_MODE)) {
// if none of the Aux Switches are set to Simple or Super Simple Mode then
// set Simple Mode using stored parameters from EEPROM
if (BIT_IS_SET(g.super_simple, switch_position)) {
set_simple_mode(2);
} else {
set_simple_mode(BIT_IS_SET(g.simple_modes, switch_position));
}
}
} else if (control_switch_state.last_switch_position != -1) {
// alert user to mode change failure
AP_Notify::events.user_mode_change_failed = 1;
}
// set the debounced switch position
control_switch_state.debounced_switch_position = switch_position;
}
control_switch_state.last_switch_position = switch_position;
}
// check_if_auxsw_mode_used - Check to see if any of the Aux Switches are set to a given mode.
bool Copter::check_if_auxsw_mode_used(uint8_t auxsw_mode_check)
{
bool ret = g.ch7_option == auxsw_mode_check || g.ch8_option == auxsw_mode_check || g.ch9_option == auxsw_mode_check
|| g.ch10_option == auxsw_mode_check || g.ch11_option == auxsw_mode_check || g.ch12_option == auxsw_mode_check;
return ret;
}
// check_duplicate_auxsw - Check to see if any Aux Switch Functions are duplicated
bool Copter::check_duplicate_auxsw(void)
{
uint8_t auxsw_option_counts[AUXSW_SWITCH_MAX] = {};
auxsw_option_counts[g.ch7_option]++;
auxsw_option_counts[g.ch8_option]++;
auxsw_option_counts[g.ch9_option]++;
auxsw_option_counts[g.ch10_option]++;
auxsw_option_counts[g.ch11_option]++;
auxsw_option_counts[g.ch12_option]++;
for (uint8_t i=0; i<sizeof(auxsw_option_counts); i++) {
if (i == AUXSW_DO_NOTHING) {
continue;
}
if (auxsw_option_counts[i] > 1) {
return true;
}
}
return false;
}
void Copter::reset_control_switch()
{
control_switch_state.last_switch_position = control_switch_state.debounced_switch_position = -1;
read_control_switch();
}
// read_3pos_switch
uint8_t Copter::read_3pos_switch(uint8_t chan)
{
uint16_t radio_in = RC_Channels::rc_channel(chan)->get_radio_in();
if (radio_in < AUX_SWITCH_PWM_TRIGGER_LOW) return AUX_SWITCH_LOW; // switch is in low position
if (radio_in > AUX_SWITCH_PWM_TRIGGER_HIGH) return AUX_SWITCH_HIGH; // switch is in high position
return AUX_SWITCH_MIDDLE; // switch is in middle position
}
// can't take reference to a bitfield member, thus a #define:
#define read_aux_switch(chan, flag, option) \
do { \
switch_position = read_3pos_switch(chan); \
if (debounce_aux_switch(chan, flag) && flag != switch_position) { \
flag = switch_position; \
do_aux_switch_function(option, flag); \
} \
} while (false)
// read_aux_switches - checks aux switch positions and invokes configured actions
void Copter::read_aux_switches()
{
uint8_t switch_position;
// exit immediately during radio failsafe
if (failsafe.radio || failsafe.radio_counter != 0) {
return;
}
read_aux_switch(CH_7, aux_con.CH7_flag, g.ch7_option);
read_aux_switch(CH_8, aux_con.CH8_flag, g.ch8_option);
read_aux_switch(CH_9, aux_con.CH9_flag, g.ch9_option);
read_aux_switch(CH_10, aux_con.CH10_flag, g.ch10_option);
read_aux_switch(CH_11, aux_con.CH11_flag, g.ch11_option);
read_aux_switch(CH_12, aux_con.CH12_flag, g.ch12_option);
}
#undef read_aux_switch
// init_aux_switches - invoke configured actions at start-up for aux function where it is safe to do so
void Copter::init_aux_switches()
{
// set the CH7 ~ CH12 flags
aux_con.CH7_flag = read_3pos_switch(CH_7);
aux_con.CH8_flag = read_3pos_switch(CH_8);
aux_con.CH10_flag = read_3pos_switch(CH_10);
aux_con.CH11_flag = read_3pos_switch(CH_11);
// ch9, ch12 only supported on some boards
aux_con.CH9_flag = read_3pos_switch(CH_9);
aux_con.CH12_flag = read_3pos_switch(CH_12);
// initialise functions assigned to switches
init_aux_switch_function(g.ch7_option, aux_con.CH7_flag);
init_aux_switch_function(g.ch8_option, aux_con.CH8_flag);
init_aux_switch_function(g.ch10_option, aux_con.CH10_flag);
init_aux_switch_function(g.ch11_option, aux_con.CH11_flag);
// ch9, ch12 only supported on some boards
init_aux_switch_function(g.ch9_option, aux_con.CH9_flag);
init_aux_switch_function(g.ch12_option, aux_con.CH12_flag);
}
// init_aux_switch_function - initialize aux functions
void Copter::init_aux_switch_function(int8_t ch_option, uint8_t ch_flag)
{
// init channel options
switch(ch_option) {
case AUXSW_SIMPLE_MODE:
case AUXSW_RANGEFINDER:
case AUXSW_FENCE:
case AUXSW_SUPERSIMPLE_MODE:
case AUXSW_ACRO_TRAINER:
case AUXSW_GRIPPER:
case AUXSW_SPRAYER:
case AUXSW_PARACHUTE_ENABLE:
case AUXSW_PARACHUTE_3POS: // we trust the vehicle will be disarmed so even if switch is in release position the chute will not release
case AUXSW_RETRACT_MOUNT:
case AUXSW_MISSION_RESET:
case AUXSW_ATTCON_FEEDFWD:
case AUXSW_ATTCON_ACCEL_LIM:
case AUXSW_MOTOR_ESTOP:
case AUXSW_MOTOR_INTERLOCK:
case AUXSW_AVOID_ADSB:
case AUXSW_PRECISION_LOITER:
case AUXSW_AVOID_PROXIMITY:
case AUXSW_INVERTED:
case AUXSW_WINCH_ENABLE:
case AUXSW_RC_OVERRIDE_ENABLE:
do_aux_switch_function(ch_option, ch_flag);
break;
}
}
/*
debounce an aux switch using a counter in copter.debounce
structure. This will return false until the same ch_flag is seen debounce_count times
*/
bool Copter::debounce_aux_switch(uint8_t chan, uint8_t ch_flag)
{
// a value of 2 means we need 3 values in a row with the same
// value to activate
const uint8_t debounce_count = 2;
if (chan < CH_7 || chan > CH_12) {
// someone has forgotten to expand the debounce channel range
return false;
}
struct debounce &db = aux_debounce[chan-CH_7];
if (db.ch_flag != ch_flag) {
db.ch_flag = ch_flag;
db.count = 0;
return false;
}
if (db.count < debounce_count) {
db.count++;
}
return db.count >= debounce_count;
}
// do_aux_switch_function - implement the function invoked by the ch7 or ch8 switch
void Copter::do_aux_switch_function(int8_t ch_function, uint8_t ch_flag)
{
switch(ch_function) {
case AUXSW_FLIP:
// flip if switch is on, positive throttle and we're actually flying
if (ch_flag == AUX_SWITCH_HIGH) {
set_mode(FLIP, MODE_REASON_TX_COMMAND);
}
break;
case AUXSW_SIMPLE_MODE:
// low = simple mode off, middle or high position turns simple mode on
set_simple_mode(ch_flag == AUX_SWITCH_HIGH || ch_flag == AUX_SWITCH_MIDDLE);
break;
case AUXSW_SUPERSIMPLE_MODE:
// low = simple mode off, middle = simple mode, high = super simple mode
set_simple_mode(ch_flag);
break;
case AUXSW_RTL:
#if MODE_RTL_ENABLED == ENABLED
if (ch_flag == AUX_SWITCH_HIGH) {
// engage RTL (if not possible we remain in current flight mode)
set_mode(RTL, MODE_REASON_TX_COMMAND);
} else {
// return to flight mode switch's flight mode if we are currently in RTL
if (control_mode == RTL) {
reset_control_switch();
}
}
#endif
break;
case AUXSW_SAVE_TRIM:
if ((ch_flag == AUX_SWITCH_HIGH) && (control_mode <= ACRO) && (channel_throttle->get_control_in() == 0)) {
save_trim();
}
break;
case AUXSW_SAVE_WP:
#if MODE_AUTO_ENABLED == ENABLED
// save waypoint when switch is brought high
if (ch_flag == AUX_SWITCH_HIGH) {
// do not allow saving new waypoints while we're in auto or disarmed
if (control_mode == AUTO || !motors->armed()) {
return;
}
// do not allow saving the first waypoint with zero throttle
if ((mission.num_commands() == 0) && (channel_throttle->get_control_in() == 0)) {
return;
}
// create new mission command
AP_Mission::Mission_Command cmd = {};
// if the mission is empty save a takeoff command
if (mission.num_commands() == 0) {
// set our location ID to 16, MAV_CMD_NAV_WAYPOINT
cmd.id = MAV_CMD_NAV_TAKEOFF;
cmd.content.location.options = 0;
cmd.p1 = 0;
cmd.content.location.lat = 0;
cmd.content.location.lng = 0;
cmd.content.location.alt = MAX(current_loc.alt,100);
// use the current altitude for the target alt for takeoff.
// only altitude will matter to the AP mission script for takeoff.
if (mission.add_cmd(cmd)) {
// log event
Log_Write_Event(DATA_SAVEWP_ADD_WP);
}
}
// set new waypoint to current location
cmd.content.location = current_loc;
// if throttle is above zero, create waypoint command
if (channel_throttle->get_control_in() > 0) {
cmd.id = MAV_CMD_NAV_WAYPOINT;
} else {
// with zero throttle, create LAND command
cmd.id = MAV_CMD_NAV_LAND;
}
// save command
if (mission.add_cmd(cmd)) {
// log event
Log_Write_Event(DATA_SAVEWP_ADD_WP);
}
}
#endif
break;
case AUXSW_MISSION_RESET:
#if MODE_AUTO_ENABLED == ENABLED
if (ch_flag == AUX_SWITCH_HIGH) {
mission.reset();
}
#endif
break;
case AUXSW_AUTO:
#if MODE_AUTO_ENABLED == ENABLED
if (ch_flag == AUX_SWITCH_HIGH) {
set_mode(AUTO, MODE_REASON_TX_COMMAND);
} else {
// return to flight mode switch's flight mode if we are currently in AUTO
if (control_mode == AUTO) {
reset_control_switch();
}
}
#endif
break;
case AUXSW_CAMERA_TRIGGER:
#if CAMERA == ENABLED
if (ch_flag == AUX_SWITCH_HIGH) {
camera.take_picture();
}
#endif
break;
case AUXSW_RANGEFINDER:
// enable or disable the rangefinder
#if RANGEFINDER_ENABLED == ENABLED
if ((ch_flag == AUX_SWITCH_HIGH) && rangefinder.has_orientation(ROTATION_PITCH_270)) {
rangefinder_state.enabled = true;
} else {
rangefinder_state.enabled = false;
}
#endif
break;
case AUXSW_FENCE:
#if AC_FENCE == ENABLED
// enable or disable the fence
if (ch_flag == AUX_SWITCH_HIGH) {
fence.enable(true);
Log_Write_Event(DATA_FENCE_ENABLE);
} else {
fence.enable(false);
Log_Write_Event(DATA_FENCE_DISABLE);
}
#endif
break;
case AUXSW_ACRO_TRAINER:
#if MODE_ACRO_ENABLED == ENABLED
switch(ch_flag) {
case AUX_SWITCH_LOW:
g.acro_trainer = ACRO_TRAINER_DISABLED;
Log_Write_Event(DATA_ACRO_TRAINER_DISABLED);
break;
case AUX_SWITCH_MIDDLE:
g.acro_trainer = ACRO_TRAINER_LEVELING;
Log_Write_Event(DATA_ACRO_TRAINER_LEVELING);
break;
case AUX_SWITCH_HIGH:
g.acro_trainer = ACRO_TRAINER_LIMITED;
Log_Write_Event(DATA_ACRO_TRAINER_LIMITED);
break;
}
#endif
break;
case AUXSW_GRIPPER:
#if GRIPPER_ENABLED == ENABLED
switch(ch_flag) {
case AUX_SWITCH_LOW:
g2.gripper.release();
Log_Write_Event(DATA_GRIPPER_RELEASE);
break;
case AUX_SWITCH_HIGH:
g2.gripper.grab();
Log_Write_Event(DATA_GRIPPER_GRAB);
break;
}
#endif
break;
case AUXSW_SPRAYER:
#if SPRAYER_ENABLED == ENABLED
sprayer.run(ch_flag == AUX_SWITCH_HIGH);
// if we are disarmed the pilot must want to test the pump
sprayer.test_pump((ch_flag == AUX_SWITCH_HIGH) && !motors->armed());
#endif
break;
case AUXSW_AUTOTUNE:
#if AUTOTUNE_ENABLED == ENABLED
// turn on auto tuner
switch(ch_flag) {
case AUX_SWITCH_LOW:
case AUX_SWITCH_MIDDLE:
// restore flight mode based on flight mode switch position
if (control_mode == AUTOTUNE) {
reset_control_switch();
}
break;
case AUX_SWITCH_HIGH:
// start an autotuning session
set_mode(AUTOTUNE, MODE_REASON_TX_COMMAND);
break;
}
#endif
break;
case AUXSW_LAND:
if (ch_flag == AUX_SWITCH_HIGH) {
set_mode(LAND, MODE_REASON_TX_COMMAND);
} else {
// return to flight mode switch's flight mode if we are currently in LAND
if (control_mode == LAND) {
reset_control_switch();
}
}
break;
case AUXSW_PARACHUTE_ENABLE:
#if PARACHUTE == ENABLED
// Parachute enable/disable
parachute.enabled(ch_flag == AUX_SWITCH_HIGH);
#endif
break;
case AUXSW_PARACHUTE_RELEASE:
#if PARACHUTE == ENABLED
if (ch_flag == AUX_SWITCH_HIGH) {
parachute_manual_release();
}
#endif
break;
case AUXSW_PARACHUTE_3POS:
#if PARACHUTE == ENABLED
// Parachute disable, enable, release with 3 position switch
switch (ch_flag) {
case AUX_SWITCH_LOW:
parachute.enabled(false);
Log_Write_Event(DATA_PARACHUTE_DISABLED);
break;
case AUX_SWITCH_MIDDLE:
parachute.enabled(true);
Log_Write_Event(DATA_PARACHUTE_ENABLED);
break;
case AUX_SWITCH_HIGH:
parachute.enabled(true);
parachute_manual_release();
break;
}
#endif
break;
case AUXSW_ATTCON_FEEDFWD:
// enable or disable feed forward
attitude_control->bf_feedforward(ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_ATTCON_ACCEL_LIM:
// enable or disable accel limiting by restoring defaults
attitude_control->accel_limiting(ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_RETRACT_MOUNT:
#if MOUNT == ENABLE
switch (ch_flag) {
case AUX_SWITCH_HIGH:
camera_mount.set_mode(MAV_MOUNT_MODE_RETRACT);
break;
case AUX_SWITCH_LOW:
camera_mount.set_mode_to_default();
break;
}
#endif
break;
case AUXSW_RELAY:
ServoRelayEvents.do_set_relay(0, ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_RELAY2:
ServoRelayEvents.do_set_relay(1, ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_RELAY3:
ServoRelayEvents.do_set_relay(2, ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_RELAY4:
ServoRelayEvents.do_set_relay(3, ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_LANDING_GEAR:
switch (ch_flag) {
case AUX_SWITCH_LOW:
landinggear.set_position(AP_LandingGear::LandingGear_Deploy);
break;
case AUX_SWITCH_HIGH:
landinggear.set_position(AP_LandingGear::LandingGear_Retract);
break;
}
break;
case AUXSW_LOST_COPTER_SOUND:
switch (ch_flag) {
case AUX_SWITCH_HIGH:
AP_Notify::flags.vehicle_lost = true;
break;
case AUX_SWITCH_LOW:
AP_Notify::flags.vehicle_lost = false;
break;
}
break;
case AUXSW_MOTOR_ESTOP:
// Turn on Emergency Stop logic when channel is high
set_motor_emergency_stop(ch_flag == AUX_SWITCH_HIGH);
break;
case AUXSW_MOTOR_INTERLOCK:
// Turn on when above LOW, because channel will also be used for speed
// control signal in tradheli
ap.motor_interlock_switch = (ch_flag == AUX_SWITCH_HIGH || ch_flag == AUX_SWITCH_MIDDLE);
break;
case AUXSW_BRAKE:
#if MODE_BRAKE_ENABLED == ENABLED
// brake flight mode
if (ch_flag == AUX_SWITCH_HIGH) {
set_mode(BRAKE, MODE_REASON_TX_COMMAND);
} else {
// return to flight mode switch's flight mode if we are currently in BRAKE
if (control_mode == BRAKE) {
reset_control_switch();
}
}
#endif
break;
case AUXSW_THROW:
#if MODE_THROW_ENABLED == ENABLED
// throw flight mode
if (ch_flag == AUX_SWITCH_HIGH) {
set_mode(THROW, MODE_REASON_TX_COMMAND);
} else {
// return to flight mode switch's flight mode if we are currently in throw mode
if (control_mode == THROW) {
reset_control_switch();
}
}
#endif
break;
case AUXSW_AVOID_ADSB:
#if ADSB_ENABLED == ENABLED
// enable or disable AP_Avoidance
if (ch_flag == AUX_SWITCH_HIGH) {
avoidance_adsb.enable();
Log_Write_Event(DATA_AVOIDANCE_ADSB_ENABLE);
} else {
avoidance_adsb.disable();
Log_Write_Event(DATA_AVOIDANCE_ADSB_DISABLE);
}
#endif
break;
case AUXSW_PRECISION_LOITER:
#if PRECISION_LANDING == ENABLED && MODE_LOITER_ENABLED == ENABLED
switch (ch_flag) {
case AUX_SWITCH_HIGH:
mode_loiter.set_precision_loiter_enabled(true);
break;
case AUX_SWITCH_LOW:
mode_loiter.set_precision_loiter_enabled(false);
break;
}
#endif
break;
case AUXSW_AVOID_PROXIMITY:
#if PROXIMITY_ENABLED == ENABLED && AC_AVOID_ENABLED == ENABLED
switch (ch_flag) {
case AUX_SWITCH_HIGH:
avoid.proximity_avoidance_enable(true);
Log_Write_Event(DATA_AVOIDANCE_PROXIMITY_ENABLE);
break;
case AUX_SWITCH_LOW:
avoid.proximity_avoidance_enable(false);
Log_Write_Event(DATA_AVOIDANCE_PROXIMITY_DISABLE);
break;
}
#endif
break;
case AUXSW_ARMDISARM:
// arm or disarm the vehicle
switch (ch_flag) {
case AUX_SWITCH_HIGH:
init_arm_motors(AP_Arming::ArmingMethod::AUXSWITCH);
// remember that we are using an arming switch, for use by set_throttle_zero_flag
ap.armed_with_switch = true;
break;
case AUX_SWITCH_LOW:
init_disarm_motors();
break;
}
break;
case AUXSW_SMART_RTL:
#if MODE_SMARTRTL_ENABLED == ENABLED
if (ch_flag == AUX_SWITCH_HIGH) {
// engage SmartRTL (if not possible we remain in current flight mode)
set_mode(SMART_RTL, MODE_REASON_TX_COMMAND);
} else {
// return to flight mode switch's flight mode if we are currently in RTL
if (control_mode == SMART_RTL) {
reset_control_switch();
}
}
#endif
break;
case AUXSW_INVERTED:
#if FRAME_CONFIG == HELI_FRAME
// inverted flight option is disabled for heli single and dual frames
if (g2.frame_class.get() == AP_Motors::MOTOR_FRAME_HELI_QUAD) {
switch (ch_flag) {
case AUX_SWITCH_HIGH:
motors->set_inverted_flight(true);
attitude_control->set_inverted_flight(true);
heli_flags.inverted_flight = true;
break;
case AUX_SWITCH_LOW:
motors->set_inverted_flight(false);
attitude_control->set_inverted_flight(false);
heli_flags.inverted_flight = false;
break;
}
}
#endif
break;
case AUXSW_WINCH_ENABLE:
#if WINCH_ENABLED == ENABLED
switch (ch_flag) {
case AUX_SWITCH_HIGH:
// high switch maintains current position
g2.winch.release_length(0.0f);
Log_Write_Event(DATA_WINCH_LENGTH_CONTROL);
break;
default:
// all other position relax winch
g2.winch.relax();
Log_Write_Event(DATA_WINCH_RELAXED);
break;
}
#endif
break;
case AUXSW_WINCH_CONTROL:
#if WINCH_ENABLED == ENABLED
switch (ch_flag) {
case AUX_SWITCH_LOW:
// raise winch at maximum speed
g2.winch.set_desired_rate(-g2.winch.get_rate_max());
break;
case AUX_SWITCH_HIGH:
// lower winch at maximum speed
g2.winch.set_desired_rate(g2.winch.get_rate_max());
break;
case AUX_SWITCH_MIDDLE:
default:
g2.winch.set_desired_rate(0.0f);
break;
}
#endif
break;
case AUXSW_RC_OVERRIDE_ENABLE:
// Allow or disallow RC_Override
switch (ch_flag) {
case AUX_SWITCH_HIGH: {
ap.rc_override_enable = true;
break;
}
case AUX_SWITCH_LOW: {
ap.rc_override_enable = false;
break;
}
}
break;
}
}
// save_trim - adds roll and pitch trims from the radio to ahrs
void Copter::save_trim()
{
// save roll and pitch trim
float roll_trim = ToRad((float)channel_roll->get_control_in()/100.0f);
float pitch_trim = ToRad((float)channel_pitch->get_control_in()/100.0f);
ahrs.add_trim(roll_trim, pitch_trim);
Log_Write_Event(DATA_SAVE_TRIM);
gcs().send_text(MAV_SEVERITY_INFO, "Trim saved");
}
// auto_trim - slightly adjusts the ahrs.roll_trim and ahrs.pitch_trim towards the current stick positions
// meant to be called continuously while the pilot attempts to keep the copter level
void Copter::auto_trim()
{
if (auto_trim_counter > 0) {
auto_trim_counter--;
// flash the leds
AP_Notify::flags.save_trim = true;
// calculate roll trim adjustment
float roll_trim_adjustment = ToRad((float)channel_roll->get_control_in() / 4000.0f);
// calculate pitch trim adjustment
float pitch_trim_adjustment = ToRad((float)channel_pitch->get_control_in() / 4000.0f);
// add trim to ahrs object
// save to eeprom on last iteration
ahrs.add_trim(roll_trim_adjustment, pitch_trim_adjustment, (auto_trim_counter == 0));
// on last iteration restore leds and accel gains to normal
if (auto_trim_counter == 0) {
AP_Notify::flags.save_trim = false;
}
}
}
Reference in New Issue View Git Blame Copy Permalink