| .. |
|
APM_Config.h
|
Copter: rename SPRAYER-enabled-define to SPRAYER_ENABLED
|
2018-06-01 15:13:05 +09:00 |
|
APM_Config_mavlink_hil.h
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Arming.cpp
|
Copter: use ArmingMethod enumeration
|
2018-07-03 15:16:38 +10:00 |
|
AP_Arming.h
|
Copter: use ArmingMethod enumeration
|
2018-07-03 15:16:38 +10:00 |
|
AP_Rally.cpp
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Rally.h
|
Copter: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
|
AP_State.cpp
|
Copter: Support new battery failsafes
|
2018-03-27 22:12:21 +01:00 |
|
ArduCopter.cpp
|
Copter: use compass singleton for logging
|
2018-07-04 20:11:27 +01:00 |
|
Attitude.cpp
|
Copter: move sanity check for rangefinder alt to within protected func
|
2018-06-06 08:33:56 +09:00 |
|
Copter.cpp
|
Copter: use AP_FWVersion singleton
|
2018-06-18 19:10:37 +01:00 |
|
Copter.h
|
Copter: Remove unused ADC include
|
2018-07-17 09:29:50 +10:00 |
|
GCS_Copter.h
|
Copter: remove CLI
|
2017-08-14 10:23:50 +09:00 |
|
GCS_Mavlink.cpp
|
Copter: handle MAV_CMD_ACCELCAL_VEHICLE_POS in GCS base class
|
2018-07-06 09:43:09 +10:00 |
|
GCS_Mavlink.h
|
Copter: handle command_long in GCS base class
|
2018-07-06 09:43:09 +10:00 |
|
Log.cpp
|
Copter: log quiet-nan for rangefinder-desired-alt when not using it
|
2018-06-06 08:33:56 +09:00 |
|
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
|
Makefile.waf
|
waf: use single entry point for make wrappers
|
2015-12-10 10:40:34 +09:00 |
|
Parameters.cpp
|
Copter: clarify RTL_ALT parameter description
|
2018-07-05 10:30:07 +09:00 |
|
Parameters.h
|
Copter: moved OSD to top level params
|
2018-06-27 14:55:00 +10:00 |
|
ReleaseNotes.txt
|
Copter: release notes for 3.6.0-rc6
|
2018-07-16 10:49:38 +09:00 |
|
UserCode.cpp
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
UserVariables.h
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
afs_copter.cpp
|
Copter: remove rcmap member from AP_AdvancedFailsafe
|
2018-05-05 18:06:31 +09:00 |
|
afs_copter.h
|
Copter: remove rcmap member from AP_AdvancedFailsafe
|
2018-05-05 18:06:31 +09:00 |
|
autoyaw.cpp
|
Copter: add sanity check for ModeFollow requiring AC_Avoid
|
2018-05-10 17:55:13 +09:00 |
|
avoidance_adsb.cpp
|
Copter: add option to disable THROW mode
|
2018-03-15 07:38:14 +09:00 |
|
avoidance_adsb.h
|
Copter: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
|
baro_ground_effect.cpp
|
Copter: eliminate mode_has_manual_throttle
|
2017-12-06 10:09:58 +09:00 |
|
capabilities.cpp
|
Copter: add compass cal capability bit
|
2016-12-04 19:17:01 -08:00 |
|
commands.cpp
|
Copter: use AP_RTC
|
2018-06-15 08:01:22 +10:00 |
|
compassmot.cpp
|
Copter: Support new battery failsafes
|
2018-03-27 22:12:21 +01:00 |
|
config.h
|
Copter: added OSD support
|
2018-06-27 14:55:00 +10:00 |
|
crash_check.cpp
|
Copter: use send_text method on the GCS singleton
|
2017-07-09 17:17:29 -04:00 |
|
defines.h
|
Copter: use AP_RTC
|
2018-06-15 08:01:22 +10:00 |
|
ekf_check.cpp
|
Copter: raise EKF failure even if USB is connected
|
2018-06-26 10:07:55 +10:00 |
|
esc_calibration.cpp
|
Copter: Do not use the Delay method wrapper.
|
2018-06-16 09:40:47 +09:00 |
|
events.cpp
|
Copter: RTL if not in AUTO mode and FS_THR_ENABLED_CONTINUE_MISSION enabled
|
2018-07-10 08:41:58 +09:00 |
|
failsafe.cpp
|
Copter: allow fence to be disabled while AFS is enabled
|
2018-02-27 07:43:13 +09:00 |
|
fence.cpp
|
Copter: check for fence breaches when disarmed
|
2018-06-11 11:41:10 +09:00 |
|
heli.cpp
|
Copter: rename flightmode_ objects to mode_
|
2017-12-12 10:39:26 +09:00 |
|
inertia.cpp
|
Copter: move home state into AP_AHRS
|
2018-03-19 10:32:37 +09:00 |
|
land_detector.cpp
|
Copter: allow AP_Stats to be optional
|
2018-03-02 07:23:35 +11:00 |
|
landing_gear.cpp
|
Copter: make landing_gear_should_be_deployed a base-class method
|
2017-12-27 12:08:15 +00:00 |
|
leds.cpp
|
Copter: remove shims used in scheduler
|
2018-02-12 11:19:34 +09:00 |
|
make.inc
|
Copter: added OSD support
|
2018-06-27 14:55:00 +10:00 |
|
mode.cpp
|
Copter: create Copter::Mode::_TakeOff subobject from takeoff_state
|
2018-06-26 09:11:21 +09:00 |
|
mode.h
|
Copter: create Copter::Mode::_TakeOff subobject from takeoff_state
|
2018-06-26 09:11:21 +09:00 |
|
mode_acro.cpp
|
Copter: add option to disable ACRO mode
|
2018-03-15 07:38:14 +09:00 |
|
mode_acro_heli.cpp
|
Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc
|
2018-03-16 13:50:57 +09:00 |
|
mode_althold.cpp
|
Copter: create Copter::Mode::_TakeOff subobject from takeoff_state
|
2018-06-26 09:11:21 +09:00 |
|
mode_auto.cpp
|
Copter: Missing Loiter Init on accel
|
2018-09-19 13:21:51 +10:00 |
|
mode_autotune.cpp
|
Copter: autotune: raise priorities of autotune success and param saved
|
2018-06-30 11:40:39 +09:00 |
|
mode_avoid_adsb.cpp
|
Copter: enable parameters inside mode objects
|
2018-02-08 17:36:33 +11:00 |
|
mode_brake.cpp
|
Copter: integrate AC_Loiter
|
2018-04-04 10:45:10 +09:00 |
|
mode_circle.cpp
|
Copter: move sanity check for rangefinder alt to within protected func
|
2018-06-06 08:33:56 +09:00 |
|
mode_drift.cpp
|
ArduCopter: changed signature for get_pilot_desired_lean_angles()
|
2018-03-19 17:51:39 +09:00 |
|
mode_flip.cpp
|
Copter: flip mode format fix
|
2018-05-31 15:21:50 +09:00 |
|
mode_flowhold.cpp
|
Copter: create Copter::Mode::_TakeOff subobject from takeoff_state
|
2018-06-26 09:11:21 +09:00 |
|
mode_follow.cpp
|
Copter: follow mode renames and comment improvements
|
2018-03-06 09:50:16 +09:00 |
|
mode_guided.cpp
|
ArduCopter：mode_guided: yaw initialization already in pos_control_start()
|
2018-07-05 15:48:00 +01:00 |
|
mode_guided_nogps.cpp
|
Copter: rename control_xx.cpp files to mode_xx.cpp
|
2017-12-12 10:39:26 +09:00 |
|
mode_land.cpp
|
Copter: Initialise desired acceleration before loiter init
|
2018-09-19 13:21:48 +10:00 |
|
mode_loiter.cpp
|
Copter: loiter glitch fix
|
2018-09-15 10:25:29 +10:00 |
|
mode_poshold.cpp
|
Copter: Initialise desired acceleration before loiter init
|
2018-09-19 13:21:48 +10:00 |
|
mode_rtl.cpp
|
Copter: Initialise desired acceleration before loiter init
|
2018-09-19 13:21:48 +10:00 |
|
mode_smart_rtl.cpp
|
Copter: SmartRTL add pilot yaw control
|
2018-04-30 13:15:44 +09:00 |
|
mode_sport.cpp
|
Copter: create Copter::Mode::_TakeOff subobject from takeoff_state
|
2018-06-26 09:11:21 +09:00 |
|
mode_stabilize.cpp
|
ArduCopter: changed signature for get_pilot_desired_lean_angles()
|
2018-03-19 17:51:39 +09:00 |
|
mode_stabilize_heli.cpp
|
ArduCopter: changed signature for get_pilot_desired_lean_angles()
|
2018-03-19 17:51:39 +09:00 |
|
mode_throw.cpp
|
Copter: Initialise desired acceleration before loiter init
|
2018-09-19 13:21:48 +10:00 |
|
motor_test.cpp
|
Copter: motor test can spin motor for 10min
|
2018-07-17 19:42:39 +09:00 |
|
motors.cpp
|
Copter: use ArmingMethod enumeration
|
2018-07-03 15:16:38 +10:00 |
|
navigation.cpp
|
Copter: Copter.h method reordering
|
2017-12-15 08:26:45 +09:00 |
|
position_vector.cpp
|
Copter: Move some common functions to AP_Math (NFC)
|
2017-12-05 08:54:49 +09:00 |
|
precision_landing.cpp
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
radio.cpp
|
Copter: implement 'air-mode' for copter
|
2018-05-29 10:27:14 +09:00 |
|
sensors.cpp
|
Copter: remove unused baro_climbrate variable
|
2018-07-04 21:08:47 +01:00 |
|
setup.cpp
|
Copter: remove CLI
|
2017-08-14 10:23:50 +09:00 |
|
switches.cpp
|
Copter: CH_12 can be used with any HAL, not just HAL_PX4
|
2018-07-04 20:05:10 +01:00 |
|
system.cpp
|
AP_Param: warn on last pass only about unknown parameters
|
2018-06-28 10:18:19 -07:00 |
|
takeoff.cpp
|
Copter: create Copter::Mode::_TakeOff subobject from takeoff_state
|
2018-06-26 09:11:21 +09:00 |
|
terrain.cpp
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
toy_mode.cpp
|
Copter: use ArmingMethod enumeration
|
2018-07-03 15:16:38 +10:00 |
|
toy_mode.h
|
Copter: enable F412 toymode button setup
|
2018-02-08 17:36:33 +11:00 |
|
tuning.cpp
|
Copter: tuning rc-feel uses multiply instead of divide
|
2018-03-16 13:50:57 +09:00 |
|
version.cpp
|
Copter: use AP_FWVersion singleton
|
2018-06-18 19:10:37 +01:00 |
|
version.h
|
Copter: firmware text to ArduCopter
|
2018-01-31 12:13:57 +09:00 |
|
wscript
|
Copter: added OSD support
|
2018-06-27 14:55:00 +10:00 |
93c0568d07