Commit Graph

136 Commits

Author SHA1 Message Date
Andrew Tridgell 4d7beab8cc Plane: added QTUN logging for quadplane 2016-03-25 12:33:19 +11:00
Lucas De Marchi e01d49ff53 ArduPlane: replace header guard with pragma once 2016-03-16 18:40:45 +11:00
Andrew Tridgell f4ccf94dfc Plane: added QLAND mode
for VTOL landing. Use for failsafe as well
2016-03-09 18:20:41 +11:00
Peter Barker ca4017d093 Plane: defines.h should not use defines from config.h
config.h includes defines.h early, so defines in config.h are unavailable
2016-02-19 12:34:23 -02:00
Tom Pittenger 2e92089ce6 Plane: Reverse Thrust
Reverse thrust for controlled landings, even with much steeper approach slopes. This is achieved by allowing throttle demand to go negative to maintain a target airspeed. A Pre-Flare stage was added, triggered by an altitude, to allow for a slower airspeed just before land. That lower airspeed can be near stall.
new params LAND_PF_ALT, LAND_PF_SEC, LAND_PF_ARSPD, USE_REV_THRUST
2016-02-09 14:18:02 +11:00
Andrew Tridgell d82c8dcd6d ArduPlane: update for changed AP_Camera API 2016-01-29 09:19:44 +11:00
Dario Lindo Andres 9bba55f937 ArduPlane: Added precise camera trigger logging
Added update_trigger and check_digital_pin functions
added camera trigger precise time mark
detect camera feedback pin status
added support for simple digital pin
included support for digital pin. Already included in
added support for TRIGGER MSG
2016-01-29 09:19:43 +11:00
Andrew Tridgell 2983576067 Plane: added QLOITER mode
quadplane loiter
2016-01-09 07:38:52 +11:00
Andrew Tridgell ca85c332d6 Plane: separate QSTABILIZE and QHOVER modes 2016-01-09 07:38:52 +11:00
Andrew Tridgell 6468fc6d93 Plane: Initial implementation of quadplane
adds "HOVER" mode
2016-01-09 07:38:52 +11:00
Tom Pittenger da8f4f9e95 Plane: reworked is_flying
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
Andre Kjellstrup 39797529fd GCS_Failsafe: defines for new failsafe option 2015-06-18 07:52:42 +10:00
Andrew Tridgell 8359b75201 Plane: removed NOINLINE define 2015-05-21 09:35:55 +10:00
Andrew Tridgell 1a7d831327 Plane: support raw IMU logging 2015-05-07 12:11:52 +10:00
Andrew Tridgell 5038e1d26d Plane: remove deprecated log types
we no longer depend on the binary format for Replay, so we can change
IDs now
2015-04-30 11:05:17 +10:00
Tom Pittenger f5dfe7c650 ArduPlane: Log isFlying status
Log is_flying() status and its float probability in new STAT msg
and piggyback on MODE bitmask flag.
2015-04-30 10:57:03 +10:00
Andrew Tridgell b0cdf8952b Plane: added HIL_MODE parameter
this allows for HIL with any firmware
2015-03-13 22:52:56 +11:00
Randy Mackay 3a1465c9d1 Plane: integrate SerialManager
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:15 +11:00
Robert Lefebvre 747232b197 Plane: Deprecate some Log Message enumerations which are moving to the DataFlash library. 2015-01-21 14:37:29 +09:00
Andrew Tridgell 5a01933b7b Plane: use dataflash Log_Write_Airspeed() 2015-01-20 09:10:57 +11:00
priseborough 2500f7e9c2 Plane : Add data logging for optical flow use with EKF 2014-12-06 18:16:48 +11:00
Andrew Tridgell ce9b14f0c8 Plane: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Andrew Tridgell fcbdcb520a Plane: rename enum for Telem2Protocol 2014-07-30 14:49:20 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:20 -07:00
Andrew Tridgell ae29a24348 Plane: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell f6bba74fb6 Plane: enable MPU9250 for Linux build 2014-07-14 09:44:34 +10:00
Andrew Tridgell 5aa58d2ab5 Plane: support 3 magnetometers 2014-07-04 12:49:25 +10:00
Randy Mackay ac65119cfe Plane: use common Log_Write_Camera
pair programmed with Craig Elder
2014-06-17 14:11:47 +10:00
Randy Mackay 2a298d0ea4 Plane: remove RALLY_WP_SIZE definition 2014-04-19 15:00:32 +09:00
Andrew Tridgell 1bce4239a3 Plane: added AUTOTUNE flight mode
this is just like FBWA, but with automatic roll/pitch tuning
2014-04-12 14:12:14 +10:00
Emile Castelnuovo a111d174c1 Plane: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell e8b9f22b01 Plane: updates for GPS changes 2014-03-24 12:04:31 +11:00
Randy Mackay 790a907811 Plane: use Dataflash lib's Log_Write_Cmd 2014-03-19 12:12:08 +09:00
Randy Mackay 693ce27bf6 Plane: pass eeprom start to Mission constructor 2014-03-19 12:11:58 +09:00
Randy Mackay 0827506533 Plane: remove unused WAIT_COMMAND 2014-03-19 12:11:24 +09:00
Randy Mackay e88f1953d0 Plane: use common location options masks 2014-03-19 12:10:21 +09:00
Andrew Tridgell 1001df0e56 Plane: removed extra log enum 2014-02-15 05:48:23 +11:00
Andrew Tridgell a7faa58879 Plane: fixed up merge errors 2014-02-15 05:48:23 +11:00
Andrew Tridgell 2817a11f23 Plane: added AHR2 and SIM logging 2014-02-15 05:48:14 +11:00
Andrew Tridgell e39247868c Plane: cleanup HIL defines 2014-02-15 05:29:46 +11:00
Andrew Tridgell 2cd6efa23e Plane: added DF logging of secondary AHRS solution 2014-02-15 05:29:45 +11:00
Paul Riseborough d6ead64083 Plane : Additional NavEKF flash logging 2014-02-15 05:28:08 +11:00
Andrew Tridgell ce9047cec5 Plane: added dataflash logging of EKF data 2014-02-15 05:28:07 +11:00
Andrew Tridgell dfa95b3464 Plane: moved the always log flag to 1<<16
this prevent problems with transferring the bitmask as a float
2014-02-14 21:51:00 +11:00
Andrew Tridgell 906fc17905 Plane: added baro and airspeed logging
including raw temperature and pressure values
2014-01-28 10:35:59 +11:00
Andrew Tridgell 3a5fb46dc2 Plane: fixed integer size problem on APM2 2014-01-14 21:27:39 +11:00
Andrew Tridgell 8755747da0 Plane: only log when armed by default
use safety switch if arming not enabled
2014-01-14 13:07:43 +11:00
Andrew Tridgell 263f3b116b Plane: added FS_GCS_ENABL==2 option
this allows GCS failsafe when the GCS isn't getting updates from the
aircraft
2013-12-20 11:39:00 +11:00