Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
21,147 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

253 Commits

Author SHA1 Message Date
Leonard Hall a00a9601a4 Copter: AP_MotorsCoax now uses 4 servos 2016-04-01 11:59:30 +09:00
Andrew Tridgell f19922fec5 Copter: added LAND_SPEED_HIGH parameter 
this is the descent rate for the first part of a landing. Separating
this from WPNAV_SPEED_DN allows for independent tuning of fast fwd
flight from landings
 2016-03-30 15:54:20 +11:00
Lucas De Marchi e88ba38595 ArduCopter: replace header guard with pragma once 2016-03-16 18:40:44 +11:00
Paul Riseborough a7b69366a1 Copter: Add flight mode for throw launch 
The is commit adds a new flight mode called 'Throw' to Copter that enables the copter to be thrown into the air to start motors. This mode can only be netered when the copters EKF has a valid position estimate and goes through the following states

Throw_Disarmed - The copter is disarmed and motors are off.
Throw_Detecting - The copter is armed, but motors will not spin unless THROW_MOT_START has been set to 1. The copter is waiting to detect the throw. A throw with an upwards velocity of at least 50cm/s is required to trigger the detector.
Throw_Uprighting - The throw has been detected and the copter is being uprighted with 50% throttle to maximise control authority. This state transitions when the copter is within 30 degrees of level.
Throw_HgtStabilise - The copter is kept level and height is stabilised about the target height which is 3m above the height at which the throw release was detected. This state transitions when the height is no more than 0.5m below the demanded height.
Throw_PosHold - The horizontal motion is arrested and the copter is kept at a constant position and height.
 2016-03-03 12:18:13 +09:00
Jonathan Challinger 3800c66f07 Copter: add RTL_CONE_SLOPE 2016-01-07 17:22:33 +09:00
Andrew Tridgell 5c94b61f49 Copter: support up to 14 input channels for all boards 2016-01-04 08:22:51 +11:00
Randy Mackay 1155b1f557 Copter: remove precision landing PI controller 
This controller has been moved into the precision landing class
 2015-12-31 15:30:36 +09:00
pepevalbe 3b3205304b Copter: added group parameter for AP_Notify library 2015-12-31 11:33:08 +09:00
Peter Barker f57d237181 Copter: support multiple simultaneous backends 2015-12-03 13:21:51 +11:00
Tom Pittenger 34d6d985e9 Copter: Add support for ADS-B 2015-11-27 15:02:15 +09:00
Jonathan Challinger 5086168b03 Copter: add RTL_SPEED parameter 2015-11-16 10:20:32 +09:00
Robert Lefebvre 5cc4f41d85 Copter: Helicopter: to use new Stab_Col and Acro_Col functions. 2015-11-12 19:37:23 +09:00
Robert Lefebvre 34fb600c4f Copter: Utilize Input Manager Class 2015-11-12 19:37:22 +09:00
Andrew Tridgell 053194fd51 Copter: added EK2_* parameters and EKF2 instance 2015-09-23 11:56:33 +10:00
Randy Mackay 7db77482f5 Copter: precision landing velocity PI object 
Follow up changes required to actually use this PI during landing
 2015-08-31 18:00:32 +09:00
Randy Mackay 26ded641db Copter: integrate Precision Landing lib 2015-08-31 18:00:28 +09:00
Robert Lefebvre 990761a13b Copter: Create new heli RSC RC Channel object. 2015-08-31 11:27:50 +09:00
Andrew Tridgell ff934d5bca Copter: added FS_CRASH_CHECK parameter 
this allows automatic crash detection to be disabled
 2015-08-31 12:15:46 +10:00
Andrew Tridgell 90909f2b4a Copter: added DISARM_DELAY parameter 
this allows automatic disarming to be disabled, or set to a shorter or
longer time as appropriate for the user
 2015-08-31 11:44:08 +10:00
Stewart Loving-Gibbard 7cb494d8e2 Copter: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more. 
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
 2015-08-29 08:05:59 +10:00
Randy Mackay a10a74d498 Copter: AUTOTUNE_MIN_D param to allow controlling minimum D 2015-08-23 14:56:39 +09:00
Andrew Tridgell 1fdf7ec83f Copter: added RPM sensor support 
send result via MAVLink
 2015-08-12 15:03:50 +10:00
Gustavo Jose de Sousa 4d4b856735 ArduCopter: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:28:40 +10:00
Randy Mackay 063faa0383 Copter: add RTL_CLIMB_MIN 
Vehicle climbs at least this many cm when entering RTL
 2015-07-13 20:38:52 +09:00
Randy Mackay f93a259b04 Copter: add comment to Solo section in Parameters.h 2015-06-14 14:47:02 +09:00
Jonathan Challinger fd37a48f8e Copter: clean up Parameters.h comments a bit 2015-06-14 14:44:15 +09:00
Jonathan Challinger 035c0b567e Copter: reserve param indices that exist in Solo repo 2015-06-14 14:44:13 +09:00
Randy Mackay aa05325b54 Copter: add althold as ekf failsafe action 2015-06-10 12:06:08 +09:00
Randy Mackay 4408f01f39 Copter: rename ekf_check_thresh to fs_ekf_thresh 2015-06-10 12:06:06 +09:00
Andrew Tridgell 1792710f41 Copter: added a bit in LOG_BITMASK for PID logging 2015-05-27 15:09:47 +10:00
Andrew Tridgell 22524daf5f Copter: added GCS_PID_MASK for mavlink rate tuning 2015-05-27 14:28:46 +10:00
Robert Lefebvre 575a5ad619 Copter: Set better default Rate PIDs for TradHeli 2015-05-22 09:38:26 +09:00
Randy Mackay d8b7e4a199 Copter: add support for 4th mavlink channel 2015-05-15 15:07:27 +09:00
Jonathan Challinger 73d961cebc Copter: mavlink initiated takeoff in alt-hold modes 
adds PILOT_TKOFF_ALT for target altitude above home in cm for pilot initiated takeoff
 2015-05-01 12:56:18 +09:00
Jonathan Challinger b10cf0f38a Copter: pre-takeoff throttle for sprung throttle sticks 
Adds PILOT_THR_BHV, PILOT_TKOFF_DZ parameters
 2015-05-01 12:56:16 +09:00
Jonathan Challinger 91a03ae0e7 Copter: add PILOT_THR_FILT and call set_throttle_out functions with that value 2015-04-16 21:00:11 +09:00
Randy Mackay 74b98b89d0 Copter: remove dcm check 2015-03-27 00:04:37 -07:00
Robert Lefebvre a5af151a91 Copter: Initial expansion of Aux Switch to Ch7-12 2015-03-17 21:18:41 +09:00
Randy Mackay b10730f35c Copter: remove THR_MAX parameter 2015-03-16 14:49:34 +09:00
Randy Mackay fbfc94cf69 Copter: remove GPS glitch and failsafe 
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
 2015-03-13 16:40:46 +09:00
Randy Mackay 6f6847c025 Copter: use only InertialNav_EKF 
remove calls to unsupported functions including ignore_next_error,
set_altitude, etc.
 2015-03-13 16:40:37 +09:00
Randy Mackay d7f624be39 Copter: remove baro_glitch protection 2015-03-13 16:40:27 +09:00
Andrew Tridgell 3f906f6bd1 Copter: added CLI_ENABLED option 2015-03-09 17:58:37 +11:00
Leonard Hall d5bbe6de03 Copter: remove TRIM_THROTTLE 
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
 2015-03-06 14:02:19 +09:00
Leonard Hall c78480e14f Copter: rename loiter_pos to pos_xy 
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
 2015-03-06 14:02:17 +09:00
Leonard Hall e232867661 Copter: move LOITER_RATE to 2-axis PI controller 
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
 2015-03-06 14:02:15 +09:00
Leonard Hall 2b0fb45fe8 Copter: integrate PID input filter 2015-03-06 14:02:11 +09:00
Leonard Hall a9a6e8856b Copter: add AUTOTUNE_AGGR parameter 2015-03-06 14:02:02 +09:00
Leonard Hall 864168e5ea Copter: add AUTOTUNE_AXES bitmask parameter 
This is used to allow tuning just some axis
 2015-03-06 14:02:01 +09:00
Randy Mackay 34503de18e Copter: integrate SerialManager 
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
 2015-01-29 14:05:14 +11:00