Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
47,499 Commits 71 Branches 508 Tags 670 MiB
Commit Graph

143 Commits

Author SHA1 Message Date
Josh Henderson a5b984640e ArduCopter: Privatize AP_IntertialSensor Logging 2021-04-29 19:19:12 +10:00
Peter Barker 65b1868863 Copter: move precision landing logging up into AC_PrecLand 2021-04-13 10:28:39 +10:00
Randy Mackay 91fa40aea6 Copter: HAL_PROXIMITY_ENABLED replaces PROXIMITY_ENABLED 2021-03-26 16:22:46 +09:00
Emre Saldiran d5715292a3 Copter: implement set_target_posvel_NED method for use in scripting 2021-03-24 08:55:48 +09:00
Tatsuya Yamaguchi 0cce5699b2 Copter: change from control_mode to flightmode 2021-03-23 22:48:20 +11:00
Tatsuya Yamaguchi ed8384b45a Copter: add option to disable LANDING_GEAR 2021-03-17 10:41:11 +09:00
Rishabh fdd39ca3a8 Copter: Check for height before turning on proximity simple avoidance 2021-02-16 20:08:00 +09:00
Andy Piper 85a8536243 Copter: All men dream, but not equally. 
Those who dream by night in the dusty recesses of their minds, wake in the day to find that it was vanity:
but the dreamers of the day are dangerous men, for they may act on their dreams with open eyes,
to make them possible.
 2021-02-12 08:35:35 +09:00
yaapu 497dbd1414 ArduCopter: added virtual getters for waypopint info 2020-12-10 12:39:44 +11:00
Gone4Dirt 434af4a4d4 Copter: Move AP_Generator to AP_Vehicle 2020-11-24 12:54:52 +11:00
Randy Mackay e2d41a3e04 Copter: integrate parachute check_sink_rate 
also move set_is_flying into check parachute to increase it's update rate
 2020-10-06 16:14:59 +11:00
Andrew Tridgell dbf6f6f4b1 Copter: fixed parachute checks for sink rate 
ensure is_flying is set, setup sink rate at the right position, force
disarm if chute releases
 2020-10-06 16:14:59 +11:00
Andy Piper b8f613c965 Copter: rename ADSB_ENABLED to HAL_ADSB_ENABLED and remove from config 2020-09-22 09:33:51 +10:00
Randy Mackay 925f76c048 Copter: integrate winch changes 
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
 2020-08-07 21:55:07 +09:00
Andy Piper 54c3d07547 Copter: make make/gimbal configurable on a per-board basis 2020-08-04 09:18:14 +10:00
Randy Mackay 30c8d7bf40 Copter: dev option so set-attitude-target thrust field used as thrust 2020-08-01 08:32:23 +09:00
Mirko Denecke 89d423556c ArduCopter: update_trigger() is now called in AP_Camera update() 2020-07-15 08:37:28 +09:00
Peter Barker a679cd9b92 Copter: add support for AP_Generator 2020-07-03 08:21:42 +09:00
Randy Mackay 980c1f5020 Copter: update ekf terrain height stable setting 
setting is true only when taking off or landing and horizontal speed is no more than 0.5m/s
 2020-06-24 21:16:50 +09:00
Andy Piper 25dcc1a623 Copter: add support for individually tracking fft peaks and motor rpms with harmonic notches 
log harmonic notch even if FFT is disabled. Fallback to throttle notch for BLHeli
move harmonic notch update to AP_Vehicle
 2020-06-21 19:09:35 +10:00
Iampete1 e797685771 Copter: add set guided mode angle for scripting 2020-06-19 10:09:35 +10:00
Peter Barker 0eb03ba7d5 Copter: make SuperSimple type-safe 2020-06-16 19:39:42 +10:00
Andy Piper 3515dc9322 Copter: make sure AP_Vehicle::fast_loop() gets called 2020-05-24 07:43:34 +10:00
Randy Mackay c4b5d47e1f Copter: white space fixes 2020-04-23 13:17:11 +09:00
Randy Mackay 05a37db07c Copter: remove call to visual_odom.update 2020-04-09 19:41:08 +09:00
Randy Mackay e2469d29bc Copter: implement start_takeoff and set_target_velocity_NED for use in scripting 2020-03-19 15:17:11 -07:00
Randy Mackay a9630d67d1 Copter: implement set_target_location method 2020-03-03 10:06:38 -07:00
Randy Mackay 9a32b3bdd9 Copter: rename update_throttle_mix 
was called update_throttle_thr_mix
also minor formatting fixes
 2020-02-25 16:52:40 +09:00
Andy Piper 4c1816a983 Copter: port betaflight in-flight fft analysis to arducopter and expose as a log message 
add harmonic notch tracking mode
call AP_GyroFFT::update_freq_hover() from update_throttle_hover()
move gyrofft configuration and control to AP_Vehicle
move fft logging to fft library
 2020-02-22 11:15:37 +11:00
Peter Barker 18670d681e Copter: let AP_Vehicle handle loop() 2020-02-06 14:41:06 +11:00
Peter Barker debedd9d34 Copter: move setup method up to AP_Vehicle base class 2020-01-28 11:34:51 +11:00
Peter Barker 45b2f24867 Copter: StorageManager layout is now done with a pragma 2020-01-28 11:34:51 +11:00
Andy Piper 93abfdb905 Copter: create generic vehicle management and move runcam to it 2019-12-30 13:02:04 +11:00
Peter Barker 544eb5f179 Copter: correct duplicate button instance 2019-12-10 09:29:52 +09:00
Peter Barker a567e8bc94 Copter: use https:// scheme for ardupilot URLs 2019-12-10 07:53:46 +11:00
Gone4Dirt 180d4e713c Copter: Added autorotation flight mode and support 2019-11-29 08:06:10 +08:00
Randy Mackay 496989820e Copter: update proximity sensor at 200hz 2019-11-15 12:25:53 +08:00
Peter Barker e6c6189fe5 Copter: cope with change in namespace of LogEvent enum 
Also move Acro Trainer types into an enum class as the global defines
interfere with the Event names.

Also eliminate the Log_Write_Event wrappers.
 2019-11-05 08:19:26 +08:00
Randy Mackay 7b0da89708 Copter: add vibration check 2019-10-18 11:15:25 +09:00
Leonard Hall 50a098c359 Copter: Standby functions 2019-10-17 14:57:18 +09:00
Randy Mackay 2cb3e446ab Copter: systemid mode formatting and name changes 2019-10-16 08:17:09 +09:00
Leonard Hall 91be844b66 Copter: Let modes stop Attitude Logging 2019-10-16 08:17:09 +09:00
Andy Piper 7fd22f63a9 ArduCopter: allow logging of both IMU and IMU_RAW 
allow logging of both IMU and IMU_RAW at the same time so that filtering and errors can be seen
 2019-10-15 10:10:32 +11:00
Andy Piper 8ce7f02167 ArduCopter: add functions to update dynamic notch frequency. Periodically log the frequency. 
tradheli- make RPM sensor input to harmonic notch in hertz
 2019-10-10 20:26:02 +09:00
murata abb91fc33a Copter: Change external button specification to option 
Copter: Change the definition name from BUTTON to BUTTON_ENABLED.
 2019-10-08 08:09:19 +09:00
Randy Mackay 9d5cbbe58f Copter: restore range finder updates to 20hz 2019-09-28 11:13:14 +09:00
Randy Mackay b54cf410ef Copter: increase read_rangefinder to 50hz 2019-09-28 11:13:14 +09:00
Peter Barker 4d6dc9b0a7 Copter: call periodic fence update function 2019-09-28 07:58:48 +09:00
Peter Barker b4537bebd8 Copter: move control_mode_t into being Mode::Number enum class 
Fixes this compiler error:

In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
        AUTO,           // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
        ^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
    AUTO =          3,  // fully automatic waypoint control using mission commands
    ^
1 error generated.
 2019-09-13 13:12:08 +09:00
Peter Barker b9a387ed9e Copter: stop updating sensor status flags 
These are updated as required in the gcs library itself.
 2019-08-17 17:45:03 +10:00