Commit Graph

30 Commits

Author SHA1 Message Date
Andrew Tridgell 008dc91a15 Rover: setup pwm esc scaling 2014-11-26 11:14:44 +11:00
Andrew Tridgell 594c5c07b3 Rover: setup failsafe trim values for if FMU firmware dies 2014-04-21 08:37:49 +10:00
Andrew Tridgell c6f9627782 Rover: use new channel output API 2014-04-03 12:19:25 +11:00
Andrew Tridgell ce3ed33649 Rover: support 14 RC channels on PX4 2014-03-25 14:47:05 +11:00
Andrew Tridgell 843318f58c Rover: updates for new RCInput API 2014-03-25 14:47:02 +11:00
Andrew Tridgell b72ea5435b Rover: check for failed RC input
loss of RC for 2s is considered a throttle failsafe
2013-12-20 09:48:36 +11:00
Andrew Tridgell 2c840547fa Rover: fixed throttle control in reverse
throttle nudge was being miscalculated
2013-11-25 11:21:52 +11:00
Andrew Tridgell e96d0f745c Rover: fixed dead-zone on throttle 2013-07-15 10:25:30 +10:00
Andrew Tridgell 5b88334dbb Rover: added full camera and mount support 2013-07-15 09:57:00 +10:00
Randy Mackay 32b5169bb9 Rover: set_dead_zone renamed to set_default_dead_zone
Change in use of parameter means value passed in should be 1/2 what it
was previously
2013-07-12 11:44:20 +09:00
Andrew Tridgell 135146c735 Rover: added LEARN_CH parameter
this allows the learning channel to be set, for transmitters where
setting up channel 7 is difficult
2013-07-01 10:10:38 +10:00
Andrew Tridgell 537d0032a8 Rover: update servo ranges on change of RCMAP_* 2013-06-03 22:22:47 +10:00
Andrew Tridgell 5a9485a419 Rover: support RCMAP_* mapping for steering/throttle 2013-06-03 19:33:59 +10:00
Andrew Tridgell 12c35da9aa Rover: fixed SKID_STEER_IN calculations 2013-03-29 19:43:28 +11:00
Andrew Tridgell caaf32211e Rover: new failsafe logic
this obeys FS_TIMEOUT and FS_ACTION
2013-03-29 10:25:53 +11:00
Andrew Tridgell 4991ea73fe Rover: fixed CH_2 and CH_4 RC pass through
fixes issue #158
2013-03-18 18:06:45 +11:00
Andrew Tridgell 0dde0b3551 Rover: initial implementation of skid steering for APMrover2
this adds SKID_STEER_IN and SKID_STEER_OUT parameters for controlling
skid skeering control and output
2013-03-15 11:04:33 +11:00
Andrew Tridgell daa603552b Rover: added new STEERING mode
this makes it easier to tune for auto mode
2013-03-01 22:33:11 +11:00
Andrew Tridgell 6cf4d11e33 Rover: cleanup parameter names and remove dead parameters 2013-02-09 20:36:26 +11:00
Andrew Tridgell f1ff27ed08 Rover: major restructuring
this removes a lot of the old arduplane code, and renames a lot of
variables.

This will need a lot more testing and fixup before being usable
2013-02-08 09:21:22 +11:00
Andrew Tridgell 509e801e21 Rover: fixed RC input 2012-12-20 14:52:35 +11:00
Andrew Tridgell b284d4c21e Rover: first cut at porting rover to AP_HAL 2012-12-20 14:52:34 +11:00
Andrew Tridgell 33e47e2036 Rover: set throttle range from -100 to 100
this allows for reverse
2012-12-18 15:42:11 +11:00
Andrew Tridgell a16ba57467 Rover: cleaned up a bunch more plane cruft
removed elevon and flap support
2012-11-28 09:35:42 +11:00
Andrew Tridgell 24adc1aaa3 Rover: make it possible to run the CLI over a radio link 2012-11-21 21:41:34 +11:00
Andrew Tridgell abc0a1cd38 Rover: major update, fixing lots of bugs
This removes a lot of the ArduPlane specific cruft left over from the
initial Rover import from ArduPlane, plus fixes a bunch of serious
bugs. For example, the rover was unable to use either compass or gps
for heading - it used just gyros!

There is still a lot of cruft left, but this at least gives a bit
better basis for future work
2012-11-17 17:45:30 +11:00
Andrew Tridgell 6e15aa68b8 Rover: updated for new RC_Channel_aux API 2012-09-08 15:14:41 +10:00
Jean-Louis Naudin 4a4402556b APMrover v2.1.3 :
Added option (hold roll to full right + SW7 ON/OFF) to init_home during the wp_list reset
Add ROV_SONAR_TRIG (default = 200 cm) - tested by Franco
Restart_nav() added and heading bug correction, tested OK in the field
RTL then stop update - Tested OK in the field
Added SONAR detection for obstacle avoidance

Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-05-14 17:47:08 +02:00
Jean-Louis Naudin 899e6e66b0 APMrover v2.0c - tested with APM v2 full kit (Oilpan) - dualversion (IMUless + IMUfull)
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-05-09 07:12:26 +02:00
Jean-Louis Naudin 77eea3a893 APMrover v2.0 - tested on Traxxas Monster Jam Grinder XL-5 3602
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-04-30 09:17:14 +02:00