Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,759 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

50 Commits

Author SHA1 Message Date
Jason Short 40a1f647f6 ACM : Setup, format 2012-11-09 22:15:16 -08:00
rmackay9 e2b1cb7e8d AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9 0868917ff4 ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
rmackay9 7fb58fce87 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
rmackay9 0299e2b51e ArduCopter: removed deprecated mag offset routine. 
Also removed commented-out block of code from navigation.pde.
 2012-10-17 19:47:21 +09:00
Andrew Tridgell 14d19ac33d ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9 94d4305cf3 ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
Jason Short e4ec96e12f ACM : better debugging text 2012-09-12 23:06:06 -07:00
Jason Short 24f80c632c ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
uncrustify 8bb14446e5 uncrustify ArduCopter/setup.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell bd6581c523 AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
rmackay9 48b7d26c5d ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t". 
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
 2012-08-16 20:04:46 +09:00
Andrew Tridgell 2ba08c2122 ACM: removed pointless load() calls 2012-08-08 16:51:14 +10:00
Andrew Tridgell 53e0e44704 ACM: fixed HIL build with new accel setup code 2012-07-20 12:46:16 +10:00
Jason Short 25c3ed6c4b Oilpan ADC parameters added 
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
 2012-07-18 22:57:11 -07:00
Andreas M. Antonopoulos 9dfb3c4db9 Added Michael Pursifull's Maxsonar HRLV model support 2012-07-11 18:46:47 -07:00
Andrew Tridgell 7883c4a545 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
rmackay9 5e2147de1f ArduCopter - setup.pde - changed cli for helicopter to call the new AP_Motors class's parameters instead of the global parameters. 
changed init_esc to call the AP_Motor's class's "throttle_pass_through" function.
 2012-04-04 23:02:29 +09:00
Andrew Tridgell 04826065ef Quaternion: show "Quaternion test" on startup if enabled 2012-03-10 10:34:29 +11:00
Andrew Tridgell b06f35eaa2 Heli: fixed some 'used before initialised' warnings 2012-02-19 16:34:43 +11:00
Randy Mackay b55db247ca TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde. 
also renamed heli parameters from _coll_ to the more descriptive _collective_
 2012-02-18 20:57:51 +09:00
Jason Short b070225366 CH 6 Range setup 2012-02-15 11:47:54 -08:00
Jason Short f9296796fd Added lengthy note about motor testing 2012-02-15 10:49:11 -08:00
Andrew Tridgell 16a5b5c3ee added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 781617cae0 token size for first()/next() is now 16 bits 2012-02-13 16:22:52 +11:00
Andrew Tridgell 1af6f08b1c adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Pat Hickey 81ce8d346e ArduCopter setup motors: print basic instructions. 2012-02-11 16:05:51 -08:00
Jason Short 8fcb2931d7 Cosmetic changes 
GPS LED lock waits for home_is_set to be true
 2012-01-28 21:19:46 -08:00
Pat Hickey 368e736a61 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Doug Weibel 2ea9db84e0 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Jason Short 30f5ecda54 Fixed Type Error 2012-01-10 23:43:44 -08:00
Pat Hickey 20b0e4cd33 ArduCopter setup.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Randy Mackay ff66a3417c OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Jason Short da903d2c3e moved some defines around 2011-12-23 14:46:32 -08:00
Andrew Tridgell c007fb49b8 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Pat Hickey 05b6f4be81 ArduCopter CLI: Add imu.init before imu.init_accel for "level" 
* Depending on when you entered the CLI, the imu might not be
  initialized yet, and init_accel would hang.
 2011-12-11 15:19:46 -08:00
Randy Mackay 62a7b19600 Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short 9afd99b834 Added notes to Imu.ax, ay, az 2011-12-10 10:19:20 -08:00
Jason Short 7f80649566 Added alternate alt hold, 
New ESC Calibration Routine
 2011-11-21 22:12:19 -08:00
Jason Short 1b943276ed shortened strings for mem 2011-11-19 14:00:55 -08:00
Jason Short 3b825fb8c1 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	Tools/autotest/autotest.py
 2011-11-12 21:53:08 -08:00
Jason Short b8c8d22fed WP counting update 2011-11-12 21:46:03 -08:00
unknown 4fcf11cf6e TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs 2011-11-12 23:23:07 +09:00
Jason Short 80c7e135d5 renamed some command variables to align with Arduplane 
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
 2011-11-04 21:41:51 -07:00
Jason Short 9fd89a9f4d Added gains to adjust travel of camera. 2011-10-15 16:34:57 -07:00
rmackay9 0e8a648043 TradHeli - added servo averaging to allow support of analog servos 
- moved heli parameters to 80 because they were causing flight modes to overlap with waypoints
 2011-09-25 16:51:25 +09:00
Jason Short 9a508a20f4 Integration of optical flow 
bug fixes for new Simple mode
increased Baro filter by 2 fields
 2011-09-15 23:33:00 -07:00
Jason Short ae81a758de Removed Simple Mode 
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
 2011-09-14 13:58:18 -07:00
Jason Short 8ae158191f Fixes Alt hold mistake 
Moves tuning into runtime definable param
Added more IMax to throttle

Signed-off-by: Jason Short <jasonshort@gmail.com>
 2011-09-10 15:16:51 -07:00
Andrew Tridgell be8864f424 renamed top level directories 
ArduCopterMega -> ArduCopter
added archives directory for old code
 2011-09-09 11:27:41 +10:00