Pat Hickey
1878290510
ArduCopter: fixes for AP_InertialSenor_UserInteract
2012-12-20 14:53:23 +11:00
Pat Hickey
5bd7046a95
ArduCopter: sketch cpp builds!
2012-12-20 14:52:28 +11:00
Pat Hickey
d9e0bbbbab
ArduCopter: first pass at AP_HAL porting
...
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
2012-12-20 14:52:27 +11:00
Jason Short
19ae5c30eb
ACM : Formatting
2012-12-13 20:12:39 -08:00
Andrew Tridgell
6fbf5ec8f2
Copter: update ArduCopter for new ins interface
2012-11-30 07:15:18 +11:00
Andrew Tridgell
bcae83c4f6
ACM: make it possible to run CLI on radio port in ArduCopter
2012-11-21 21:41:34 +11:00
Andrew Tridgell
a3c3c59b82
ACM: fixed some memory cast warnings
2012-11-19 08:42:36 +11:00
rmackay9
07a7a1acd8
ArduCopter: replaced digitalRead and digitalWrite with faster calls
...
improved performance logging to dataflash
2012-11-19 01:16:07 +09:00
Jason Short
549489ddbb
ACM : Setup, format
2012-11-09 22:15:16 -08:00
rmackay9
d9b4407e64
AP_InertialSensor: changes after review with Tridge.
...
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
2012-11-07 19:21:15 +09:00
rmackay9
a1b4ec6d0e
ArduCopter: move to use new INS library instead of IMU library
2012-11-07 19:21:09 +09:00
rmackay9
78316adf75
ArduCopter: replace Serial.print with Serial.print_P to save memory.
...
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
2012-10-22 16:45:24 +09:00
rmackay9
401fb4101c
ArduCopter: removed deprecated mag offset routine.
...
Also removed commented-out block of code from navigation.pde.
2012-10-17 19:47:21 +09:00
Andrew Tridgell
5fd39bb928
ACM: updates for new GPS detection
...
a GPS can now be attached after startup
2012-09-17 14:45:47 +10:00
rmackay9
b6d2d4723f
ArduCopter: print firmware version of code instead of zero.
2012-09-13 21:49:11 +09:00
Jason Short
072085d2d8
ACM : better debugging text
2012-09-12 23:06:06 -07:00
Jason Short
4c8e257ea2
ACM : forced setup_show to dump params during log dump for better analysis.
2012-09-10 20:52:30 -07:00
uncrustify
bb6e4ac969
uncrustify ArduCopter/setup.pde
2012-08-21 19:19:50 -07:00
Andrew Tridgell
6d11940ada
AHRS: removed Quaternion build support from APM/ACM/rover
2012-08-22 10:42:21 +10:00
rmackay9
36f947acb9
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Andrew Tridgell
103b02fe94
ACM: removed pointless load() calls
2012-08-08 16:51:14 +10:00
Andrew Tridgell
0a12b6ad6f
ACM: fixed HIL build with new accel setup code
2012-07-20 12:46:16 +10:00
Jason Short
c9d3ab5413
Oilpan ADC parameters added
...
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
2012-07-18 22:57:11 -07:00
Andreas M. Antonopoulos
d4a0cb5db1
Added Michael Pursifull's Maxsonar HRLV model support
2012-07-11 18:46:47 -07:00
Andrew Tridgell
33440567e6
ACM: ArduCopter updates for new compass interface
2012-06-27 16:01:50 +10:00
rmackay9
4aa40bdf10
ArduCopter - setup.pde - changed cli for helicopter to call the new AP_Motors class's parameters instead of the global parameters.
...
changed init_esc to call the AP_Motor's class's "throttle_pass_through" function.
2012-04-04 23:02:29 +09:00
Andrew Tridgell
7a9b3d3388
Quaternion: show "Quaternion test" on startup if enabled
2012-03-10 10:34:29 +11:00
Andrew Tridgell
12327eb2a9
Heli: fixed some 'used before initialised' warnings
2012-02-19 16:34:43 +11:00
Randy Mackay
232359186e
TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde.
...
also renamed heli parameters from _coll_ to the more descriptive _collective_
2012-02-18 20:57:51 +09:00
Jason Short
a43ee36bee
CH 6 Range setup
2012-02-15 11:47:54 -08:00
Jason Short
73591a0ca5
Added lengthy note about motor testing
2012-02-15 10:49:11 -08:00
Andrew Tridgell
d55a0c3a71
added AP_Param::show_all()
...
this moves the logic into common code
2012-02-13 16:22:52 +11:00
Andrew Tridgell
0f9adbdae0
token size for first()/next() is now 16 bits
2012-02-13 16:22:52 +11:00
Andrew Tridgell
3b4cae3cc3
adapted main ACM code for AP_Param
2012-02-13 16:22:52 +11:00
Pat Hickey
739317276d
ArduCopter setup motors: print basic instructions.
2012-02-11 16:05:51 -08:00
Jason Short
d1fcebb5ca
Cosmetic changes
...
GPS LED lock waits for home_is_set to be true
2012-01-28 21:19:46 -08:00
Pat Hickey
98a90d0352
ArduCopter: Call motors_output_enable at correct spot during init
2012-01-22 12:03:11 -08:00
Doug Weibel
ed9f7cb1b6
Update battery monitoring code for ArduCopter
...
Fixes compatibility for APM2. Also a significant update to the battery monitoring code: We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos. These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere). Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs. The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Jason Short
6b836d1a09
Fixed Type Error
2012-01-10 23:43:44 -08:00
Pat Hickey
6a4442557c
ArduCopter setup.pde: translate from CH_ to MOT_ notation
2012-01-09 21:57:02 -08:00
Randy Mackay
bbe6dea980
OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
...
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Jason Short
73a73fbf35
moved some defines around
2011-12-23 14:46:32 -08:00
Andrew Tridgell
483bef35e5
IMU: update ACM and APM for flash_leds change in IMU init
2011-12-13 18:19:41 +11:00
Pat Hickey
8d878a2cae
ArduCopter CLI: Add imu.init before imu.init_accel for "level"
...
* Depending on when you entered the CLI, the imu might not be
initialized yet, and init_accel would hang.
2011-12-11 15:19:46 -08:00
Randy Mackay
67855b207d
Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types
2011-12-11 16:40:59 +09:00
Jason Short
d9347290a4
Added notes to Imu.ax, ay, az
2011-12-10 10:19:20 -08:00
Jason Short
89e014c06a
Added alternate alt hold,
...
New ESC Calibration Routine
2011-11-21 22:12:19 -08:00
Jason Short
8e509b63a7
shortened strings for mem
2011-11-19 14:00:55 -08:00
Jason Short
7dd737ad90
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
...
Conflicts:
Tools/autotest/autotest.py
2011-11-12 21:53:08 -08:00
Jason Short
ea57fad80c
WP counting update
2011-11-12 21:46:03 -08:00