Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,768 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

5768 Commits

Author SHA1 Message Date
rmackay9 0722d671d6 SPI3: add checks that SPI bus has been initialised to reduce possibility of interfering with UART3 on APM1 2012-10-18 19:17:24 +09:00
rmackay9 e0727e6d31 ArduCopter: bug fix for telemetry not working on APM1. 
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
 2012-10-18 19:15:21 +09:00
rmackay9 9392c8cae2 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 2428cc647c DataFlash_APM1: use spi_semaphore to avoid conflicts with optical flow 2012-10-18 17:03:50 +09:00
rmackay9 a7d9e181d3 AP_OpticalFlow: added ability to pass in semaphores for main spi bus to stop conflicts with dataflash on APM1 2012-10-18 17:02:45 +09:00
rmackay9 5f2c900797 DataFlash_APM2: renamed semaphore to spi3_semaphore to make it more obvious which semaphore is required. 2012-10-18 17:00:05 +09:00
Andrew Tridgell 890bed4918 GPS: avoid output delays in the GPS auto detection 
this sends out the GPS init strings in 16 byte chunks to avoid causing
timing glitches when no GPS is attached
 2012-10-18 16:18:32 +11:00
Olivier ADLER 78e88994e1 ArduPPM: Redundancy mode 
Reworked the PPM decoder (i did forget the sync symbol pre-pulse)
Splitted pre-pulse and pulse width variable for better reliability and easier processing
 2012-10-17 16:28:05 +02:00
rmackay9 0299e2b51e ArduCopter: removed deprecated mag offset routine. 
Also removed commented-out block of code from navigation.pde.
 2012-10-17 19:47:21 +09:00
rmackay9 f1fe5f303b ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 a4a2fad798 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 25b3acab8c ArduCopter: bug fix in earthframe->body frame translation. 
Provided by Leonard Hall.

Also removed large unnecessary comments.
 2012-10-17 19:15:25 +09:00
rmackay9 3a26606510 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
rmackay9 7228236db6 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 7787bb4fd5 ArduCopter: bug fix for get_yaw_rate_stabilized_ef 
Provided by Leonard Hall
 2012-10-17 10:18:24 +09:00
Andrew Tridgell d52a8b146b APM: fixed a comment typo 2012-10-16 17:21:04 +11:00
Andrew Tridgell 33d9ae23ff battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
Andrew Tridgell f541b2a081 AP_AnalogSource: added set_pin() interface 
this allows pin numbers to be changed at runtime
 2012-10-16 17:20:15 +11:00
Andrew Tridgell dac569a393 RC_Channel: simplify the example 
use an array of channels
 2012-10-16 15:50:54 +11:00
Andrew Tridgell bad02cab04 RC_Channel: ensure _reverse is not 0 
this caused the example to fail
 2012-10-16 15:50:29 +11:00
Pat Hickey 8577a0c7a1 MultiFastSerial example sketch: notes on fatal error in avr-gcc 4.5.x 2012-10-15 20:42:19 -07:00
Pat Hickey 2dace5cf5f FastSerial example sketch: Depend on AP_Common for PSTR definitions 2012-10-15 20:42:18 -07:00
Pat Hickey def4ffbe86 AP_Common: PSTR def has specific version for avr-gcc 4.6 compatibility 
* Also a small change in FastSerial/vprintf.cpp, which duplicates the
  PSTR definition
* Won't effect others using earlier versions of avr-gcc
 2012-10-15 20:42:18 -07:00
Olivier ADLER 6b6e580a13 ArduPPM: Redundancy mode 
Base algorithm added for channel count auto detection in the decoder himself.
Replaced the #define for PPM_CHx_CHANNELS by PPM_CHx_MAX_CHANNELS.
Channel count #define was not needed anymore thanks to the channel count auto detection.
Channel detection post processing to do.
 2012-10-15 22:49:01 +02:00
Pat Hickey 5dd12bbe9d RC_Channel unit test: fixed build, functionality still wrong 2012-10-15 10:37:29 -07:00
Robert Lefebvre 1e01a642bc Adding some comments to parameters. 2012-10-15 09:37:02 -04:00
rmackay9 025cc05cab ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
Pat Hickey 2c9678bf01 MultiFastSerial test: make it easier to observe which serial port causes crash 2012-10-14 21:08:33 -07:00
LeonardTHall 4203655646 New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
Pat Hickey afcc3c735a FastSerial: add extra example sketch MultiFastSerial to test multiple ports 2012-10-14 18:58:12 -07:00
Olivier ADLER b9372826b4 ArduPPM: Redundancy mode switchover algorithm 
Auto Switchover algorithm with primary receiver switchback.
Force switchover channel moved to channel 9
Manual modifications.
 2012-10-14 23:58:00 +02:00
rmackay9 ee41f3be6c ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9 254fff6acd ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
Olivier ADLER ddef15b095 ArduPPM: Redundancy mode 
Dual input PPM decoder rework
flags for frame and channel error control
decoder algorithm rework
 2012-10-14 01:10:52 +02:00
Olivier ADLER 4f0fae5436 ArduPPM: Redundancy mode 
Work in progress
adding a channel pre pulse lengt #define for each PPM mode
dual channels PPM input capture interrupt algorithm
 2012-10-13 14:59:03 +02:00
rmackay9 c201b3c35e ArduCopter: small comment fixes related to battery monitoring 2012-10-13 20:52:14 +09:00
rmackay9 e151d3735a ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
rmackay9 71c773801a ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre 8e19e7d0b2 Added #define for Tilt_Compensation. 
Also added some detail to WP_Speed_Max parameter.
 2012-10-12 14:51:31 -04:00
Olivier ADLER 3cecc8256d ArduPPM: PPM Redundancy mode 
Some rework and cleaning for #define stuff
 2012-10-12 19:08:19 +02:00
Olivier ADLER 499a2931e5 ArduPPM : Redundancy mode 
Work in progress on a new Redundancy dual PPM sum mode for PPM encoder.

- New library PPM_Encoder_v3.h and new manual manual_v3.txt

- New format conversion capability between input and output PPM frame timings and channel count.

This will be experimental until heavily tested. The main goal is to allow the use of low cost satellite receivers in a high safety setup, and allow a new teacher / student RC mode without link between the two pilot transmitters.
 2012-10-12 14:32:14 +02:00
Robert Lefebvre 446d8ee934 Added comment detail for Tilt_Comp Parameter. 
Reduced parameter default value for TradHeli.
 2012-10-11 13:17:39 -04:00
rmackay9 aee36ce84c VARTest.pde: fix compile errors for autotest 2012-10-11 21:52:48 +09:00
Olivier ADLER e9e5b63c1f Rename: file rename 
Small cleaning removing space in filename.
 2012-10-11 14:47:03 +02:00
Olivier ADLER f558727a0d Protocols : Jeti telemetry description 
This is the Jeti Telemetry protocol. Common in Europe for RC multicopters telemetry through 2.4 Ghz Jeti Duplex links.
 2012-10-11 11:42:45 +02:00
Olivier ADLER aaffa313ae Test: test commit 
A small test
 2012-10-11 11:42:45 +02:00
rmackay9 9052b4152b ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9 b5c1e23549 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
rmackay9 a5feda6b1f ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015 
Updated after discussing with Marco
 2012-10-11 17:25:01 +09:00
rmackay9 94d16d426f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00