Leonard Hall
1c59ec8b94
Copter: PosHold supports offsets
2024-10-04 09:25:56 +09:00
Iampete1
a72182ae97
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
2024-09-22 08:40:12 +09:00
Peter Barker
784760342d
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
2024-09-06 11:53:09 +10:00
Peter Barker
f64fcb78d3
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
2024-07-02 09:17:26 +10:00
muramura
07a5f61782
Copter: Change from enum to class
2024-05-07 20:27:15 +09:00
Leonard Hall
1a5b4fb7d2
Copter: Reorder Alt_hold state switch statement for clarity
2022-10-04 10:03:44 +09:00
Leonard Hall
2165d19af1
Copter: PosHold: remove unnecessary loiter_nav->update
2022-09-02 10:55:48 +09:00
murata
08a1ad3c39
Copter: Change from division to multiplication
2022-03-16 18:41:52 +11:00
Josh Henderson
3107c42fca
Copter: INAV rename for neu & cm/cms
2021-11-30 10:08:07 +11:00
Josh Henderson
6b871fba55
ArduCopter: inav funcs use _xy()
2021-11-30 10:08:07 +11:00
chobitsfan
1ca471c2d1
Copter: fix PosHold LOOP_RATE_FACTOR usage
2021-11-10 21:11:37 +09:00
Leonard Hall
5d5ccc8c78
Copter: Update ACRO to use rate parameters and update expo function
2021-09-23 20:03:53 +09:00
Leonard Hall
f3dc47ce3d
Copter: Add units to the AC_AttitudeControl Library
2021-09-09 08:01:14 +09:00
Leonard Hall
5fea74d4d0
Copter: Separate landing and terrain following.
2021-09-06 16:00:19 +09:00
Leonard Hall
df9470d8af
Copter: Don't reset yaw rate when disarmed or ground idle in Heli Stab and Acro
2021-07-13 09:51:36 +10:00
Leonard Hall
a1ad194abd
Copter: seperate kinimatic shaping from pid limit setting
2021-07-10 20:25:05 +09:00
Andrew Tridgell
d89388c4cc
Copter: use cleaned up APIs
2021-06-24 20:28:45 +10:00
Leonard Hall
3b0a870504
Copter: Rename set_yaw_target_to_current_heading
2021-05-26 16:03:05 +09:00
Leonard Hall
e294991b08
Copter: Fix before squash
2021-05-24 20:13:37 +10:00
Leonard Hall
caeaf7c047
Copter: Fix take off altitude
2021-05-24 20:13:37 +10:00
Leonard Hall
4bae8f03a4
Copter: Use PosControl fixes
2021-05-24 20:13:37 +10:00
Peter Barker
e7a9e0acb4
Copter: move brake state into a structure
2021-04-06 07:53:23 +09:00
Rishabh
618282e996
Copter: Remove avoidance completly from poshold
2021-03-22 14:04:42 +09:00
murata
44a622ea7f
Copter: Set the gravitational acceleration value to the defined value
2021-01-05 09:11:14 +09:00
bnsgeyer
c75848435e
Copter: fix heli land detector and incoporate reset_I_smoothly
2020-12-21 23:33:48 -05:00
Randy Mackay
0f234583d6
Copter: poshold clears wind est when disarmed or landed
2020-11-10 08:56:36 +09:00
Randy Mackay
5b71726c73
Copter: poshold wind effect comp limited to 2/3rds of angle max
2020-09-16 08:19:17 +09:00
Peter Barker
1ffd697769
Copter: add missing fallthrough statements
2020-01-15 13:55:42 +11:00
Leonard Hall
ffd838d908
Copter: Delay release of I term until take off
2019-11-09 09:40:10 +08:00
Peter Barker
b0428f0fe8
Copter: make surface_tracking a class, various functions methods
2019-08-06 14:09:09 +09:00
Leonard Hall
c56acb49d6
Copter: Add missing Loiter initialisation lines.
...
This command is missing to define the desired acceleration that loiter will initalise to.
loiter_nav->clear_pilot_desired_acceleration();
2019-07-20 16:40:51 +09:00
Leonard Hall
0e34d8b1ff
Copter: PosHold fix for low brake_rate
2019-07-18 11:13:51 +09:00
Peter Barker
676d75c391
Copter: correct namespacing of Copter modes
...
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker
3c436b30f0
Copter: have takeoff.start() handle clearing i terms and setting land-complete
2019-05-15 18:24:26 +10:00
Peter Barker
37c07e1d89
Copter: use enum class for roll/pitch mode
...
This adds some type-safety and helps distinguish between the many
defines which are used within PosHold mode
Saves about 210 bytes of flash
2019-04-30 08:36:59 +09:00
Peter Barker
e28c6b9dc6
Copter: remove redundant poshold_ prefix on PosHold methods
2019-04-30 08:36:59 +09:00
Peter Barker
f57a9f11cc
Copter: move poshold state variables into mode object
...
This was simply moving the members from the poshold struct into the
class then mechanically removing poshold. from in front of the member
access.
2019-04-30 08:36:59 +09:00
Randy Mackay
b7d0e4ec10
Copter: remove surface tracking shim functions
2019-04-19 07:45:52 +09:00
Randy Mackay
33a57361bd
Copter: reduce args passed to get_surface_tracking_climb_rate
...
The same arguments are always passed in
2019-04-19 07:45:52 +09:00
Peter Barker
46a6f45e4a
Copter: adjust for desired spool state and spool state renames
2019-04-14 12:18:03 +09:00
Randy Mackay
d626ea66f1
Copter: poshold loses stray set-desired-spool-state
...
spool state is all handled higher up in the poshold state switch statement
2019-04-08 09:42:21 +09:00
Leonard Hall
593925567b
Copter: formatting fixes
2019-04-08 09:42:21 +09:00
Leonard Hall
38cc5a817f
Copter: consolidate mode state decisions
...
bnsgeyer and rmackay9 contributed to these changes
make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
Patrick José Pereira
33764d6c3b
Copter: Fix typo
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-03-26 15:39:23 +11:00
Peter Barker
fab2d59a1c
Copter: move check for position up
2019-03-01 13:43:20 +09:00
murata
8644f4d76e
Copter: Disable option code
...
Copter: Revert change
Copter: Change mistakes
2019-02-26 10:00:00 +09:00
Peter Barker
f0ea4af514
Copter: rename get_velocity_xy to get_speed_xy
2019-02-07 09:03:17 +09:00
Randy Mackay
50c5ad7076
Copter: TradHelis force spool up before takeoff
2019-01-15 11:41:44 +09:00
bnsgeyer
ca565675f2
Copter: Tradheli gets support for spool logic
2019-01-15 11:41:44 +09:00
Leonard Hall
2ddb3f6697
Copter: desired-ground-idle replaces spin-when-armed
2019-01-15 11:41:44 +09:00