Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
14,128 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

100 Commits

Author SHA1 Message Date
Andrew Tridgell dcdfff66e8 Copter: setup pwm esc scaling 2014-11-26 11:14:44 +11:00
Randy Mackay 8eba55ed67 Copter: throttle zero debounce to separate function 
Also initialise throttle_zero  to true on startup
Treat throttle less than zero as zero
 2014-10-08 21:52:16 +09:00
Jonathan Challinger 96f50b7cd7 Copter: add throttle_zero state 2014-10-08 20:54:19 +09:00
Randy Mackay 41c576044f Copter: allow passthru for ch 9 ~ 14 
Based on work by Emile Castelnuovo
 2014-09-23 22:55:19 +09:00
Randy Mackay 58602bd1ae Copter: move esc calibration to separate file 
Restructured into case statement
Replaced use of g.throttle_max with definition
Added more comments
Send message to ground station instead of printing on console (although
probably both are unlikely to be read)
 2014-09-19 22:21:47 +09:00
Randy Mackay af28270669 Copter: bug fix for throttle failsafe 
Missing bracket could cause throttle failsafe to be triggered even when
disabled or motors disarmed
 2014-07-21 20:58:16 +09:00
Randy Mackay df28db1361 Copter: minor formatting update 2014-07-17 11:49:38 +09:00
Craig Elder 07d43534c1 Copter: Change Radio Failsafe Timeout 
Change Radio Failsafe Timeout from 2 seconds to 200ms
 2014-07-16 19:41:43 -07:00
Craig Elder 3c9c943b67 Copter: Change Radio Failsafe Timeout 
Change Radio Failsafe Timeout from 2 seconds to 200ms
 2014-07-16 11:03:29 -07:00
Randy Mackay e1a6b07e60 Copter: setting ESC param to 2 skips high throttle check 
This allows the all-at-once ESC calibration to be performed on a setup
in which the RC input takes some time to come online.
 2014-07-09 13:25:08 +09:00
Andrew Tridgell 27ad8c39d6 Copter: enable passthrough auxillary channels 2014-04-03 12:19:44 +11:00
Andrew Tridgell e1b9135946 Copter: updates for new RCInput API 2014-03-25 14:47:04 +11:00
Randy Mackay ac9f0b5fd1 Copter: remove setup_aux_channels 
moved to individual motors libraries
 2014-02-07 22:04:28 +09:00
Randy Mackay e6f4fb4828 Copter: moved coax servo set-up to AP_MotorCoax 2014-02-07 12:36:11 +09:00
Dneault f48e106271 Copter: add coax heli support 
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
 2014-02-07 12:36:04 +09:00
Andrew Tridgell dc6433d63c Copter: ensure that motor channels cannot be used for auxillary functions 
disable RC_Channel_aux channels that are used for motors. This perhaps
should be done by the AP_Motors library, but for now this is simpler
 2014-02-06 21:34:47 +11:00
Andrew Tridgell 5a3a7f1cec Copter: use new RC_Channels API 2014-02-06 10:17:16 +11:00
Randy Mackay 0f67e25d37 TradHeli: set throttle_min to zero by default 2013-11-15 22:58:38 +09:00
Randy Mackay 4537e0aa15 Copter: add deadzone to ch8 for TradHeli 2013-11-15 22:58:20 +09:00
ssq870424 07d3f2a3c5 Copter: add support for singlecopter airframe 
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
 2013-11-12 23:40:27 +09:00
Jason Short 520a535c21 Copter: TOY mode updates 2013-11-02 21:34:48 +09:00
Randy Mackay de08116320 Copter: disable some aux channels on hexa and octas 
Resolves issue #324
 2013-10-31 15:22:34 +09:00
Randy Mackay d86ac9041e Copter: report RC receiver health to GCS 2013-10-24 16:32:55 +09:00
Randy Mackay d2bbc06502 Copter: allow throttle deadband to be redefined in APM_Config.h 2013-10-13 20:41:11 +09:00
Randy Mackay 9435eb4a15 Copter: remove unused flags and consolidate ap and ap_system 2013-10-08 15:25:14 +09:00
Randy Mackay 7cc8a9038f Copter: move failsafe flags into structure 2013-09-26 19:37:15 +09:00
Randy Mackay 36bbed8fdd Copter: removed calls to set motor's max throttle 2013-09-12 22:28:38 +09:00
Andrew Tridgell 1b99ef5e4f Copter: added a delay in ESC calibration 
this allows AP_Notify to run via the delay callback
 2013-08-30 13:01:36 +10:00
Randy Mackay 52ef77393c Copter: integrate Toshiba_LED_PX4 2013-08-30 13:01:35 +10:00
Randy Mackay e985253f1a Copter: integrate notify 2013-08-30 13:01:35 +10:00
Randy Mackay 6969ab573d Copter: configurable max lean angle 
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
 2013-08-11 12:53:22 +09:00
Randy Mackay 2f4221391e Copter: set_dead_zone renamed to set_default_dead_zone 
Dead zones now set as part of rc initialisation instead of only after
eeprom is erased.
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:23 +09:00
Andrew Tridgell 340c451caf Copter: fixed off-by-one in rcmapper 
oops ...
 2013-06-03 22:22:26 +10:00
Andrew Tridgell 725293b9c3 Copter: removed use of rc_ch[] global array 2013-06-03 16:23:48 +10:00
Randy Mackay 213eaa8db6 Copter: integrate draft RCMapper 2013-06-03 16:23:47 +10:00
Randy Mackay 9d0f40b432 Copter: add pre_arm_rc_check 
Motors are not be enabled unless we have passed rc checks which include
checking the radio in calibration has been performed.
 2013-05-16 16:32:00 +09:00
Randy Mackay 31e430948a Copter: use renamed RCInput valid_channels 2013-04-29 15:06:30 +09:00
Andrew Tridgell 300a8d2bbc Copter: support all 12 channels on PX4 
last 4 channels are on the FMU pins
 2013-04-25 20:10:53 +10:00
Randy Mackay b48864e1ad Copter: allow CH6 tuning of compass declination 2013-04-15 21:50:44 +09:00
Randy Mackay f9539384a1 Copter: rename failsafe to failsafe_radio 
Makes way for separation of failsafes for throttle, gps and gcs
 2013-03-16 17:14:21 +09:00
Randy Mackay 8af605cafc Copter: set update rate to 50hz during esc calibration 
Also modified some comments in the code re the esc calibration
 2013-01-25 11:34:48 +09:00
rmackay9 672fdfbf71 ArduCopter: added ERR dataflash message 
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
 2013-01-02 09:55:37 +11:00
Pat Hickey 13c044ab3e ArduCopter: fixes to radio.pde 2012-12-20 14:52:28 +11:00
Pat Hickey d9e0bbbbab ArduCopter: first pass at AP_HAL porting 
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
 2012-12-20 14:52:27 +11:00
rmackay9 d31efebd44 ArduCopter: rename throttle failsafe parameters. 
Switch to LAND flight mode if throttle failsafe triggers and we do not have a GPS.
THR_FAILSAFE renamed to FS_THR_ENABLE.
THR_FS_VALUE renamed to FS_THR_VALUE.
THR_FS_ACTION removed (action is now controlled by setting FS_THR parameter).
 2012-12-10 23:38:43 +09:00
rmackay9 0f7bb79d89 ArduCopter: add comments to tuning parameters. 
Use RC_CHANNEL types as defined by RC_Channel library.
Remove unused definitions.
 2012-12-09 16:44:42 +09:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
rmackay9 73ed6c9dbf ArduCopter, APM_RC: failsafe if PPM encoder fails to update for 2 seconds 2012-11-15 23:35:36 +09:00
Jason Short 9735a0eff1 ACM: Allow for user defined roll and pitch input max 2012-11-11 18:00:10 -08:00
rmackay9 bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00