Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,486 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

169 Commits

Author SHA1 Message Date
Randy Mackay 784f7385b5 Copter: add attitude and pos control params 2014-02-15 05:27:35 +11:00
Randy Mackay 7b9a48107e Copter: move angle_max parameter to AP_Vehicle 2014-02-15 05:27:32 +11:00
Randy Mackay 2219f21744 Copter: add RC_FEEL_RP parameter 
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
 2014-02-12 16:28:41 +09:00
Randy Mackay 5d929351ca Copter: removed unused servo3, servo4 from coax 2014-02-07 12:36:17 +09:00
Dneault f48e106271 Copter: add coax heli support 
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
 2014-02-07 12:36:04 +09:00
Andrew Tridgell 50a90a1043 Copter: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Lukasz cb17a5bdb6 Copter: Add RSSI_RANGE parameter 
Added ability to rescale rssi input voltage. Useful for receivers like
FrSky which have 3.3V output.
 2013-12-17 22:38:39 +09:00
ctech4285 2b5d8aa5b7 Copter: integrate EPM library 2013-12-17 15:36:42 +09:00
Andrew Tridgell 28d98414e7 Copter: fixed some build warnings 2013-12-11 10:21:20 +11:00
Randy Mackay 59cea4b88c Copter: remove CopterLED from main code 2013-11-30 18:20:55 +09:00
Andrew Tridgell 9c812d5028 Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD 2013-11-26 13:05:32 +11:00
Andrew Tridgell a49710f20e Copter: added uartD support 
this also brings GCS_Mavlink.pde closer to the plane implementation
 2013-11-26 13:05:32 +11:00
Randy Mackay ed9f369492 Copter: shorten g.arming_check_enabled variable 
g.arming_check_enabled shortened to g.arming_check
 2013-11-25 17:23:39 +09:00
Randy Mackay c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay 159d6320bf Copter: move SINGLE parameters to start at 75 2013-11-12 23:40:38 +09:00
ssq870424 07d3f2a3c5 Copter: add support for singlecopter airframe 
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
 2013-11-12 23:40:27 +09:00
Jason Short c3aa56459a Copter: remove unused Toy param 2013-11-02 21:34:50 +09:00
Randy Mackay 97770ae352 Copter: rc10, rc11 available even without MOUNT 2013-10-31 22:55:02 +09:00
Randy Mackay 8386b658e9 Copter: add ANGLE_RATE_MAX param 
Limits the maximum rotation rate requested by the angle controller which
is used in stabilize, loiter, rtl and auto flight modes
 2013-10-29 11:27:05 +09:00
Randy Mackay 8de6c34252 Copter: comments update for GPS_HDOP_GOOD parameter 2013-10-13 13:53:26 +09:00
Randy Mackay dab4f032f9 Copter: integrate BattMonitor 2013-10-03 11:16:28 +09:00
Randy Mackay 6c5294f89e Copter: integrate GPS_Glitch parameters 2013-09-24 21:41:45 +09:00
Randy Mackay d8eb7fb82f Copter: remove x100 from IMAX definitions 2013-08-19 22:38:34 +09:00
Randy Mackay d000967a76 Copter: pre-arm check for gps hdop < 2 2013-08-15 13:06:36 +09:00
Randy Mackay 6969ab573d Copter: configurable max lean angle 
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
 2013-08-11 12:53:22 +09:00
Randy Mackay 74fb500efe Copter: integrate AC_Sprayer 2013-08-05 21:12:23 +09:00
Randy Mackay 49dbdce89c Copter: split ACRO_P into ACRO_RP_P and ACRO_YAW_P 2013-08-05 21:05:00 +09:00
Randy Mackay 82082e044c Copter: remove ACRO's axis enabled parameter 
Acro is now body frame (with earth frame leveling) while Sport is earth
frame acro
 2013-08-05 21:04:57 +09:00
Randy Mackay 21e523b9ac Copter: Acro trainer separated into limited and leveled 2013-08-05 21:04:53 +09:00
Randy Mackay aefb38e486 Copter: remove param to disable accel based throttle controller 2013-07-12 22:57:30 +09:00
Randy Mackay 404cd5f3da Copter: rename g.pid_throttle to g.pid_throttle_rate 
Small code clean-up to make throttle rate controller's pid more obvious
 2013-06-30 00:04:21 -10:00
Andrew Tridgell 23eade8f74 Copter: enable RELAY_* parameters 2013-06-25 12:46:53 +10:00
Randy Mackay 213eaa8db6 Copter: integrate draft RCMapper 2013-06-03 16:23:47 +10:00
Randy Mackay 5ee68db6f0 TradHeli: add parameter descriptions 
small formatting changes too
 2013-05-21 15:33:41 +09:00
Randy Mackay bd44c2f73d Copter: all pre-arm checks to be disabled 
set ARMING_CHECK parameter to zero to disable
 2013-05-20 14:48:04 +09:00
Randy Mackay 9fdab5e8fe Copter: remove unused AUTO_SLEW_RATE parameter 2013-05-17 16:09:17 +09:00
Randy Mackay 38239c652a Copter: ch8 aux switch 
Ch8 can be used as an aux switch like ch7.  Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
 2013-05-17 14:42:28 +09:00
Randy Mackay bab9fa25e5 Copter: add GCS failsafe 2013-04-29 21:30:22 +09:00
Randy Mackay c232d7af4b Copter: correct fence parameter 2013-04-27 11:14:11 +09:00
Randy Mackay 58d1da2d80 Copter: integrate AC_Fence in place of limits 
Lesser functionality than limits but saves more than 150 bytes and it
works
 2013-04-27 11:14:07 +09:00
Andrew Tridgell 300a8d2bbc Copter: support all 12 channels on PX4 
last 4 channels are on the FMU pins
 2013-04-25 20:10:53 +10:00
Randy Mackay 745df9b13c Copter: add SONAR_GAIN to tune reaction to sonar 
Some users report the response to sonar is too violent, this allows that
reaction to be reduced
 2013-04-20 15:58:36 +09:00
Randy Mackay 37abfdc65a Copter: make CIRCLE_RATE a tunable parameter 
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
 2013-04-20 12:03:55 +09:00
Randy Mackay 0fc9c8739e Copter: add WP_YAW_BEHAVE parameter 
Allows user to control whether nose points towards next waypoint and/or
home when RTLing.
Replaces YAW_OVR_BEHAVE which had a very similar purpose.  Almost nobody
ever knew about or used this parameter.
 2013-04-18 15:30:18 +09:00
Randy Mackay f5955d8915 Copter: auto climb and descent params removed 
These params now reside in the AC_WPNav library
 2013-04-18 14:52:21 +09:00
Randy Mackay 629d23b7e2 Copter: remove WP_SPEED and WP_RADIUS parameters 
AC_WPNav library has equivalent params with very similar names
 2013-04-14 13:27:37 +09:00
Randy Mackay b58c26bcd5 Copter: remove pid_nav_lat, pid_nav_lon 2013-04-14 12:12:51 +09:00
Randy Mackay 2db8365c90 Copter: add AC_WPNav to parameters list 2013-04-14 10:39:02 +09:00
Randy Mackay 1b6fcad90a Copter: remove tilt compensation parameter 
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
 2013-03-17 16:53:32 +09:00
Randy Mackay 61e29173e3 Copter: remove unused crosstrack variables and parameters 
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
 2013-03-17 16:46:31 +09:00