39b08decf3
AC2.0.24b
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2567 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:03:26 +00:00
8261ea0807
Traditional Heli - merged heli code into ACM trunk code!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2548 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 12:14:10 +00:00
4c52712f52
2.0.16, Now that Yaw PID vs PI issue is sorted, this is reverting back to Rate based Yaw.
...
Made minor change in Loiter to check something.
Motor LEDs enabled. Let me know if they work OK.
Armed Motors is now Solid to match GPS behavior.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2421 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 18:21:55 +00:00
0c2ffd30b3
Yaw Alternate enabled by default.
...
Yaw dead_zone minimized
revved to 2.0.11
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2394 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 05:04:48 +00:00
39a7276c9c
Added resetting of Loiter location based on stick input. Fly it to a location and let it stick.
...
Added Octo Support
Fixed Loiter issue regarding Yaw towards loiter location
Added Yaw control alternative for testing
decreased Yaw deadband to +-5°
revved to 2.0.10
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2389 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 02:14:18 +00:00
2c2c4c882c
Moved PitchMax back to 18°
...
raised the Yaw deadband.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2305 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-15 22:34:10 +00:00
12357746a9
better Baro hold - Baro_KD was way too high.
...
Clean up with WP processing
moved crosstrack call to more logical location
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2259 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-14 04:30:42 +00:00
3dea060983
new ESC calibration routine
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2121 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-06 22:46:57 +00:00
05a24c070a
temp removed altitude requirement
...
change PWM scaling technique for Ch1, Ch2, Ch4
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2094 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-05 17:47:11 +00:00
0c61e9dd79
Lots of little things. Yaw control is updated based on Jani's logs. Thanks!
...
Takeoff now works well.
better logging.
tuned down kD for Yaw - was causing some bad behavior.
Auto mission now resets when entering mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1914 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-21 05:15:45 +00:00
0063c8e60d
Added rudimentary tuning with CH6. Assign this to your Flaps knob on your radio. in APM_config.h set your desired option, then upload. The knob will adjust the value in real time. Enter the CLI and run test, tune to see the output value.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1902 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 23:08:16 +00:00
860adeb812
added a limit to throttle_input = 800 for stability insurance
...
found an odd bug in SIMPLE mode that broke LOITER mode. Fixed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1871 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 23:07:24 +00:00
a2e02c4a02
RC_3 - the throttle channel dead zone upped to 60 to avoid noise issues
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1825 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 16:11:08 +00:00
e9c894215a
Revved the firmware version.
...
Updated the motor spin up issue - this is the I've not set my radio up properly issue.
updated 200ms motor spin up issue with the Libraries - for those who have ESC's that don't do sanity checks.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1816 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 21:03:20 +00:00
d09800f6f9
disabled tabs in emacs formatting markers
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1790 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:20:11 +00:00
1fe9a84e2c
bug fixes and updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1751 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 06:00:27 +00:00
97107d89d2
bug fixes and updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1750 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 00:57:06 +00:00
b59474fc1a
Big changes in the way commands are parsed and mission tasks are done. Not tested at all.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 02:32:50 +00:00
e51be3328b
Should be flyable now. Please Use Reset in setup before flying.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1726 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 05:33:39 +00:00
2555abcf1d
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1719 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-24 05:56:59 +00:00
6a34bef020
in progress updates, don't fly
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1710 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 20:58:10 +00:00
765e3d2935
updated to AP_Var
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1681 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-19 07:21:42 +00:00
d481503937
updated Param gen - won't compile yet.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1666 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-17 07:09:13 +00:00
fe9bd03d20
debug code updated
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1625 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-10 07:13:16 +00:00
749ac8c69d
radio flaps set to 1000
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1593 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-05 19:00:36 +00:00
aecc9db68e
added ch7,8 to init for hexa quads
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1584 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-01 05:01:19 +00:00
b4abbacbd8
fixed FBW bugs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1560 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-26 07:14:54 +00:00
22d0e922d3
Moved output to motors.pde
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1551 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-24 02:04:44 +00:00
021746fd0a
hexa frame setp
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1536 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 16:40:03 +00:00
64d061a79f
cleaning up the instructions for use
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1519 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-21 06:10:26 +00:00
5c7b99fe33
Added Tri-copter support for Max
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1421 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-04 17:55:03 +00:00
e8cc8e08fb
Added Tri-copter support for Max
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1412 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-04 06:06:26 +00:00
95baa14ecd
Big update - motors re-assigned to new positions.
...
New, fabulous Yaw control.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1398 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-02 20:34:42 +00:00
d95e8539d9
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1373 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-30 07:40:57 +00:00
250920edba
fixed a bug on Yaw.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1309 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-28 01:45:43 +00:00
8847a8c698
fixed a bug on Yaw.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1308 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-28 01:26:05 +00:00
4bd32750a4
some bug fixes, added basic camera leveling example for pitch only. Added DCM test. Added better Yaw gain defaults. Split radio and RC inits into two calls. Removed inappropriate auto_trim function.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1306 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-27 23:09:08 +00:00
9e0ad4301a
latest updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1267 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-26 05:25:52 +00:00
95d683d043
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1191 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-19 16:40:33 +00:00
jasonshort
rmackay9@yahoo.com
tridge60@gmail.com
jphelirc
analoguedevices