Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
16,265 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

25 Commits

Author SHA1 Message Date
Andrew Tridgell 619196b6b3 HAL_PX4: fixes for new PX4 device paths 2015-02-14 12:25:44 +11:00
Andrew Tridgell 4132b53541 HAL_PX4: publish actuator values for UAVCAN ESCs 
this publishes scaled actuator values so that the uavcan module can
drive ESCs
 2014-11-26 11:14:44 +11:00
Andrew Tridgell 154bf51279 HAL_PX4: minor tidy up of if statement 2014-11-14 13:51:16 +11:00
Holger Steinhaus 9e9c62d245 HAL_PX4: work-around for periodic enable_ch() calls 2014-11-14 13:51:16 +11:00
Holger Steinhaus e5549c90a1 HAL_PX4: do not overwrite disabled channels with zeros 
Fixes #1321
 2014-11-14 13:51:16 +11:00
Andrew Tridgell e22c8b27a9 HAL_PX4: if there are no enabled channels don't send to PX4IO 
this makes it possible to disable PWM output to IO to test override
 2014-11-07 10:39:07 +11:00
Andrew Tridgell 7e3b8a30f5 HAL_PX4: use px4io generated values for servo output readback 
this makes it easier to observe the behaviour of IO failsafe
 2014-11-05 21:54:53 +11:00
Randy Mackay ffcd259b4e HAL_PX4: implement force_safety_on 2014-09-18 09:58:46 +09:00
Andrew Tridgell 5cd145a307 AP_HAL: added set_failsafe_pwm() API 
this allows the PWM values for FMU firmware failure to be setup
 2014-04-21 08:36:52 +10:00
Andrew Tridgell c93794999e HAL_PX4: remove an old conditional define 2014-02-11 15:58:25 +11:00
Andrew Tridgell 439a075b30 AP_HAL: added force_safety_off rcoutput function 
this forces the safety switch off, enabling PWM on the IO board
 2014-02-11 15:58:25 +11:00
Andrew Tridgell 99b41f110f HAL_PX4: enable the FMU PWM pins to be used as GPIO when needed 2014-01-20 17:06:28 +11:00
Andrew Tridgell 87cc95dd7f AP_HAL: removed unused enable_mask and disable_mask functions 2014-01-16 17:16:17 +11:00
Andrew Tridgell 3ae6f03761 HAL_PX4: be less verbose about disarmed PWM setup 2014-01-16 13:11:13 +11:00
Andrew Tridgell db1d438e97 HAL_PX4: implement set_safety_pwm() API 
used to set PWM on motors when disarmed
 2014-01-15 22:25:50 +11:00
Andrew Tridgell 63586e3e23 HAL_PX4: fixed build for new PX4Firmware 2014-01-13 13:54:51 +11:00
Andrew Tridgell 2c149bac8e HAL_PX4: added new arming ioctls 2013-05-16 16:43:38 +10:00
Andrew Tridgell 709615159a HAL_PX4: support 12 output channels with PX4IO 
first 8 on IO board, next 4 on FMU outputs
 2013-04-25 20:10:53 +10:00
Pat Hickey e0457f21de AP_HAL_PX4: fix off-by-one error in RCOutput channel sending 2013-02-23 15:04:17 -08:00
Andrew Tridgell 4fd7630ec9 HAL_PX4: IO_SET_FEATURES is not needed any more 2013-01-27 15:05:28 +11:00
Andrew Tridgell 90e264d56a HAL_PX4: disable manual override in PX4 for now 2013-01-27 12:52:14 +11:00
Andrew Tridgell 8f2f4b1bc5 HAL_PX4: use write() to /dev/pwm_output for servo output 
this lowest the cost of PWM output a lot, but relies on the new I2C
based IO firmware
 2013-01-25 20:44:36 +11:00
Andrew Tridgell 6e8501603c HAL_PX4: avoid RCOutput ioctl unless values change 
this lowers latency somewhat
 2013-01-23 07:29:59 +11:00
Andrew Tridgell 319e1a4e84 HAL_PX4: support setting servo rate 2013-01-07 11:05:30 +11:00
Andrew Tridgell 0fcc6d7389 HAL_PX4: added an RC Output driver 2013-01-04 22:25:36 +11:00