Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,412 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

110 Commits

Author SHA1 Message Date
Jason Short 57e4fabb57 Attitude.pde: Turned off boost_p for nav_throttle based on Testing feedback from Marco. 2012-06-26 10:39:42 -07:00
Jason Short 91cde15c27 Attitude.pde - Added small boost to alt hold for takeoff. 2012-06-25 23:12:19 -07:00
Robert Lefebvre 7eae382a22 Open up constraint on Rate Yaw Output for all copters. 2012-06-22 10:06:01 -04:00
Jason Short 0ccf5724aa Small fix to angle boost - increases by about 20% to deal with inefficiencies of non-downward thrust 2012-06-20 08:47:47 -07:00
Jason Short 6dc1e02f76 Inertial Control 
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
 2012-06-13 22:34:45 -07:00
rmackay9 3618ac62e0 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Robert Lefebvre 3e6f37d540 Opening up the Yaw Rate constraint for Trad Heli. 2012-06-07 22:40:25 -04:00
Robert Lefebvre 1b789b7928 Yaw Fix 
Modified Nav_Yaw controller to better track intended heading changes.
 2012-06-07 17:15:33 -04:00
Jason Short 71111a5816 Stabilization patches 
removed Angle error limit for stabilization
constricted Iterm to +- 5° error and limited the implementation to when the quad is +- 5° from center
doubled the output limit for Rate controller.
increased default Rate_P gain to .18 with matching Rate_D of .004
Tested in the SIM and in backyard. dramatically increases performance and quad no longer overshoots and flips when pushed hard.
 2012-06-05 16:41:44 -07:00
Jason Short 5ce93faf51 Moved PID logging counter into define 2012-06-03 11:13:50 -07:00
Jason Short 2ae5d50261 Renamed some variables to clarify functionality. 2012-05-29 12:42:37 -07:00
Jason Short 6c999b5d54 Attitude.pde - Removed rate limit based on SIM flights. These should never have been in place and seriously detriment Acro flight. 2012-05-21 09:58:23 -07:00
rmackay9 bd8534ef14 ArduCopter - Attitude.pde - added logging of optical flow pid controller 2012-04-21 20:17:12 +09:00
rmackay9 c7edd7857c ArduCopter - added dataflash logging of roll and pitch rate controllers 2012-04-08 10:19:20 +09:00
rmackay9 23c3f25654 ArduCopter - Attitude.pde - moved heli_get_angle_boost from heli.pde (which will be removed) to Attitude.pde. In fact we should combine heli_get_angle_boost and the regular get_angle_boost. 2012-04-04 22:51:39 +09:00
Andrew Tridgell 409c147ce3 ACM: fixed heli build 2012-03-27 15:37:25 +11:00
Andrew Tridgell 5d7c571fb1 ACM: fixed the build on the 1280 2012-03-27 15:37:24 +11:00
rmackay9 441413f1c6 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
Andrew Tridgell 690ad58a64 AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short 722a4d01e8 ACM: Attitude.pde - consolidated wind I term resets 2012-03-18 22:31:21 -07:00
Jason Short bb56cea1ac ACM: increased the available rate error constrain, it was too low 2012-03-10 12:39:16 -08:00
Jason Short 285f2dd791 ACM: removed the experiment for rate error. 2012-03-10 12:38:29 -08:00
Jason Short 43b3e1ccd1 ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Jason Short 27f6afd178 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
rmackay9 8da8ce5b58 ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine) 2012-02-28 22:56:26 +09:00
rmackay9 082cc70f1c ArduCopter - Attitude.pde - updated get_rate_roll and get_rate_pitch to use new average filter. 
modified all int to int16_t in Attitude.pde
 2012-02-28 21:26:37 +09:00
Jason Short a3f65b4a23 increased the rate error for more responsive alt hold 2012-02-25 13:31:21 -08:00
rmackay9 ab0e1d7632 TradHeli - increase max yaw input to 45 degrees 2012-02-24 20:18:40 +09:00
Jason Short b1340bbf80 added a constraint to D term 2012-02-23 09:14:44 -08:00
Jason Short 70d7a1f5d0 Added slow_wp default in AP mode 2012-02-19 13:15:40 -08:00
Jason Short 03aa28224b re-implemented WII Dampening filter for Marco. 2012-02-16 22:38:23 -08:00
Jason Short 6913400221 cast D term to float just in case 2012-02-16 22:09:21 -08:00
Jason Short bb4c02fbff Added acro_p to the params 2012-02-15 11:29:25 -08:00
Jason Short 11d1973abd Added Acro_P 2012-02-15 09:10:14 -08:00
Andrew Tridgell 1af6f08b1c adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Jason Short 4f44ccc182 get_acro_yaw added 2012-02-10 22:32:55 -08:00
Jason Short f3547a04a5 Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that. 2012-02-09 22:22:00 -08:00
Randy Mackay 1a1f6cac5d OptFlow - reenable OF_LOITER pid controller and reduce I term 2012-02-01 08:04:18 +09:00
Jason Short c855c81d2a limiting alt hold rate error to 1m/s 2012-01-29 17:08:34 -08:00
Jason Short 0213f4dd88 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Randy Mackay 2f84b54bbb OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Jason Short 02d6adb21f slightly less filtering for less latency 2012-01-21 22:04:54 -08:00
Jason Short 8f86caa3ff limiting the pitch throttle compensation 2012-01-21 11:59:49 -08:00
Jason Short 525f7cd40f cleanup 2012-01-20 22:52:30 -08:00
Jason Short d991a22453 Refined the D term for stabilize 
moved all the rest_I terms from code into 1 central place
 2012-01-20 22:52:29 -08:00
Jason Short 11e1df497d lowered Loiter I, commented out unused var 2012-01-14 11:20:40 -08:00
Jason Short f25d741f62 temp removed alt D term until more testing 2012-01-14 11:20:40 -08:00
Jason Short 9a0539f39e tuned down Alt hold D gain 2012-01-13 09:36:51 -08:00
Jason Short 09c4bbe46e Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short 5418d330f6 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00