Commit Graph

3780 Commits

Author SHA1 Message Date
Andrew Tridgell 6a804c3a09 Plane: update release notes for 4.0.8beta1
# Conflicts:
#	ArduPlane/release-notes.txt
2021-01-06 09:37:39 +11:00
Peter Hall 0c68ec7b5c Plane: add limit to pid log metadata 2021-01-05 10:27:28 +11:00
Andrew Tridgell 96c2a5c77c Plane: added scaling for Q_TAILSIT_VFGAIN
this scales the vectoring in fixed wing flight to remove the impact of
surface speed scaling and add throttle scaling
2021-01-05 08:23:28 +11:00
Andrew Tridgell a0fcef6ceb Plane: added tilt vectoring in fixed wing modes
this allows for vectoring for roll and pitch in fixed wing modes on
tilt-vectored quadplanes
2021-01-05 08:23:28 +11:00
Michael du Breuil 2909623057 Plane: Ensure that only one form of throttle nudging is active at once 2021-01-03 12:47:14 +11:00
Hwurzburg 913d1b81b2 Plane: correct bug that prevents QACRO rudder disarm 2021-01-02 08:59:31 +11:00
Tom Pittenger c653ff880a Plane: extend Stream rates param count to match MAVLINK_COMM_NUM_BUFFER 2020-12-29 07:52:09 -07:00
Peter Barker 9b2ef4f6f1 Plane: move rudder-arming arm checks into Plane's AP_Arming 2020-12-29 12:55:27 +11:00
Hwurzburg 5b471c4c0e Plane: move loiter,thermal out of auto fs group 2020-12-29 10:55:00 +11:00
Iampete1 33e397c524 Plane: tailsitter: output 0 tilt with 0 vector gain 2020-12-22 11:00:59 +11:00
Iampete1 c62c19c798 Plane: tailsitter: apply gain scailing to Tilts in motors only Qassist 2020-12-22 11:00:59 +11:00
Iampete1 54ee2c35fb Plane: rename tailsitter scailing max param to match min and update descriptions 2020-12-22 11:00:59 +11:00
Iampete1 0976979045 Plane: tailsitter: set motor limit flags 2020-12-22 11:00:59 +11:00
Iampete1 c8b3c91ae5 Plane: Tailsitter add disk theory and altitude gain scailing 2020-12-22 11:00:59 +11:00
Mark Whitehorn 9bf89e5635 Plane: add check for vectored tailsitter in tailsitter_transition_vtol_complete 2020-12-21 12:56:24 +11:00
Mark Whitehorn dd7a860f23 Plane: always instantiate AC_AttitudeControl_TS 2020-12-21 12:56:24 +11:00
Mark Whitehorn 24508f08dc Plane: don't relax pitch attitude controller for vectored tailsitters in throttle_wait
add is_vectored_tailsitter()
instantiate AC_AttitudeControl_TS for tailsitters
2020-12-21 12:56:24 +11:00
Andrew Tridgell 8e3c6124eb Plane: added support for rear motor tilt
needed for X8 tilt tri test aircraft for this PR
2020-12-21 12:05:50 +11:00
Andrew Tridgell e94cf561d0 Plane: use rull euler control for fwd transition of tilt vectored planes
this gives strong yaw control and wind handling for tilt vectored
planes in forward transitions. It relaxes the yaw if the user either
demands yaw with stick input or plane navigation is demanding a roll
angle for a turn

When navigation is demanded we setup yaw rate for a coordinated turn
2020-12-21 12:05:50 +11:00
Andrew Tridgell abd5f8351d Plane: don't reset yaw target in TRANSITION_TIMER for tilt-vectored quadplanes 2020-12-21 12:05:50 +11:00
Andrew Tridgell ad14e153e8 Plane: fixed tilt vectoring to cope with large tilt angles
This uses vectoring for both roll and yaw when tilted, and uses
differential thrust for yaw when tilted
2020-12-16 08:45:11 +11:00
Peter Barker 1307a2fea8 ArduPlane: add auxillary function to change to FBWA 2020-12-15 19:14:33 +11:00
Habibullah Oladepo 739fec001f Plane: Fix typos in Parameters.cpp 2020-12-13 10:51:38 -08:00
Tom Pittenger 04f6b2e26e Plane: remove unnecessary ::cork() in init 2020-12-11 17:48:11 +11:00
yaapu 141010ac39 ArduPlane: added virtual getters for waypoint info 2020-12-10 12:39:44 +11:00
Tom Pittenger 4a35159cba Plane: reset baro_takeoff_alt while disarmed 2020-12-09 18:17:53 +11:00
Andrew Tridgell cd2f2f96eb rename barometer parameters to BARO prefix 2020-12-08 13:22:17 +11:00
Peter Barker 719ca3f95f Plane: be consistent about strings in fence auto-enable/disable 2020-12-08 12:26:35 +11:00
Andrew Tridgell 2d0201855e ArduPlane: moved init_safety to AP_Vehicle 2020-12-08 11:14:24 +11:00
Peter Barker 5fae2652ab ArduPlane: let AHRS get the airspeed sensor from the singleton 2020-12-07 15:57:28 -08:00
Hwurzburg 8658023dad Plane: Add lower CHECK_SCALE defaults for QuadPlane 2020-12-07 11:49:01 +11:00
Andrew Tridgell cd6ddf7d4f Plane: fixed disable of geofence on quadplane landing
fixes #15917
2020-12-02 18:33:07 +11:00
Andrew Tridgell 52f61c7ac1 Plane: make FENCE_AUTOENABLE an AP_Enum 2020-12-02 18:33:07 +11:00
Andrew Tridgell d984ddc163 Plane: apply circular limits to QLOITER pilot angles
This uses the same logic as Copters get_pilot_desired_angle() to apply
a circular limit and the limits in Q_ANGLE_MAX and Q_LOIT_ANG_MAX to
loiter pilot angles.

Co-authored-by: Kris <kris968658@gmail.com>
2020-12-01 11:22:49 +11:00
Hwurzburg 3cdcce2123 ArduPlane: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00
Gone4Dirt 70246059ed Plane: Move AP_Generator to AP_Vehicle 2020-11-24 12:54:52 +11:00
Iampete1 0e50023593 Plane: tailsitter: use true hover throttle in VTOL transision. 2020-11-18 19:33:21 +11:00
Iampete1 dd3ac893b3 Plane: dont use VTOL throttle percentage in tailsitter vtol transisiton 2020-11-18 19:33:21 +11:00
Hwurzburg 5e8e088978 ArduPlane:Add safety limit on tailsitter VTOL transition throttle
Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>
2020-11-17 11:21:17 +11:00
Iampete1 42887891be Plane: tailsitter: make sure alt target is abover current alt 2020-11-17 10:15:27 +11:00
Iampete1 f480f4e946 Plane: tailsitter: fix Qassist back - transision 2020-11-17 10:15:27 +11:00
Iampete1 c03de6bdbe Plane: log Qassist state 2020-11-17 10:15:27 +11:00
Andy Piper fa454da315 Plane: allow OSD for TX-only screens 2020-11-11 18:13:11 +11:00
Andrew Tridgell eea62bf733 Plane: added optional ground effect compensation for quadplanes
this allows for landings in aircraft badly effected by ground effect
to be compensated for
2020-11-10 12:05:48 +11:00
giacomo892 9b4441011c ArduPlane: Fix throttle nudge reset due to wrong radio timing 2020-11-10 10:20:23 +11:00
Mark Whitehorn c054218568 Plane: report quadplane setup errors in config_error loop 2020-11-05 15:04:10 +11:00
Iampete1 2d80dcd937 Plane: remove tailsitter VTOL transition race condition 2020-11-04 18:34:00 +11:00
Iampete1 5f67f8130b Plane: tailsitters use Z stopping point on transition 2020-11-04 18:34:00 +11:00
Iampete1 024d2b7435 Plane: always output flaperons and dspoilers 2020-11-03 10:44:07 +11:00
Iampete1 b225ae43ab Plane: always log tailsitter scalefactor 2020-11-03 10:38:51 +11:00