Iampete1
a6206bde3c
Plane: move to new `using_airspeed_sensor` ahrs method
2023-10-31 10:39:21 +11:00
Peter Barker
fc722b5efc
AP_Tuning: add and use AP_TUNING_ENABLED
2023-09-21 07:07:58 +10:00
Iampete1
bb80881c10
Plane: don't trigger RC failsafe until RC has been received for the first time
2023-05-02 09:11:18 +10:00
Henry Wurzburg
b4c79c9105
Plane:add FlightOptions helper
2023-04-26 17:35:25 +10:00
Henry Wurzburg
1415418d6e
Plane:Takeoff on rudder arm only after return to neutral
2023-04-25 09:28:45 +10:00
Andrew Tridgell
99f997161a
Plane: holdoff auto takeoff till rudder neutral
...
when arming with rudder we need to hold off the takeoff until the user
has released the rudder stick or we can yaw badly during the takeoff
2023-02-09 07:02:32 +11:00
Peter Barker
fdd5c048a4
ArduPlane: rename parameter name BRD_SAFETYENABLE to BRD_SAFETY_DEFLT
2022-10-26 19:53:03 +11:00
Iampete1
a592f76282
ArduPlane: change AC_FENCE to AP_FENCE_ENABLED
2022-07-27 19:04:56 +10:00
Peter Barker
302c8e4b98
ArduPlane: rename within_min_dz to in_min_dz for consistency
...
... consistency with in_trim_dz
2022-03-08 11:17:45 +11:00
Henry Wurzburg
0c32e71272
ArduPlane: clarify and simplify RC failsafe messages
2022-03-01 11:05:15 +11:00
Iampete1
42a2e1094c
Plane: set failsafe limit for throttle left and right
2022-02-17 12:31:16 +11:00
Iampete1
f725f7bb7e
Plane: set new slew limit and inherit slew limt for flaps
2022-01-25 10:12:13 +11:00
Jaaaky
852546f8cf
ArduPlane: fix man_expo pitch & rudder params/variables
2022-01-12 18:27:08 +11:00
Hwurzburg
5cafccd447
ArduPlane: fix flare rc switch action with flight option bit 10 active
2021-11-21 21:00:04 +11:00
Iampete1
2f4661c52f
Plane: use float for set/get output scaled
2021-10-20 18:29:58 +11:00
Iampete1
dc2ba8236a
Plane: trim_radio: check manual mode and rotation rates and add mesages
2021-09-28 09:16:24 +10:00
Peter Barker
3d34e061fe
ArduPlane: add and use HAL_QUADPLANE_ENABLED
2021-09-14 11:23:18 +10:00
Iampete1
3c44a4fe6b
Plane: radio: remove recompute_pwm_no_deadzone calls in training mode
2021-08-31 09:48:59 +10:00
Iampete1
59a158d7be
Plane: don't output throtte in when safe
2021-08-16 21:22:35 +10:00
Iampete1
0eab3faf32
Plane: use new tailsiter class
2021-07-27 09:08:34 +10:00
Andrew Tridgell
1ae669bb01
Plane: added manual input expo for MANUAL, ACRO and TRAINING
...
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
fef8b37b11
Plane: Address Randy review comments
2021-03-05 14:52:46 +11:00
James O'Shannessy
aae092b88f
ArduPlane: Remove all unused geofence capability
...
ArduPlane: Remove missed geofence logic
2021-03-05 14:52:46 +11:00
James O'Shannessy
17fb585bf1
ArduPlane: Add support for AC_Fence
...
ArduPlane: Remove some geofence logic from ArduPlane
ArduPlane: Refactor action and mode return implementation
ArduPlane: Use polyfence to find the return point.
2021-03-05 14:52:46 +11:00
Michael du Breuil
2909623057
Plane: Ensure that only one form of throttle nudging is active at once
2021-01-03 12:47:14 +11:00
Peter Barker
9b2ef4f6f1
Plane: move rudder-arming arm checks into Plane's AP_Arming
2020-12-29 12:55:27 +11:00
Tom Pittenger
04f6b2e26e
Plane: remove unnecessary ::cork() in init
2020-12-11 17:48:11 +11:00
giacomo892
9b4441011c
ArduPlane: Fix throttle nudge reset due to wrong radio timing
2020-11-10 10:20:23 +11:00
Samuel Tabor
93bcfc4c3e
Plane: Assign flap channel in set_control_channels() to avoid expensive call in set_servos_flaps().
2020-09-03 07:55:51 +10:00
Samuel Tabor
590ebb180c
Plane: Update airbrake channel assignment in set_control_channels() to avoid expensive call in airbrake_update()
2020-09-02 10:10:09 -07:00
Andrew Tridgell
3c705d1c60
Plane: added THR_FAILSAFE=2 option
...
this allows for RC inputs to be ignored at low throttle, but won't
trigger failsafe. It is meant for users flying BVLOS missions, where
they want GCS failsafe enabled, but don't want RC failsafe, and want
to be sure that RC inputs will be ignored at low RC throttle values
Thanks to suggestion from Pompecukor
2020-08-07 14:01:20 +10:00
Peter Hall
cd46c5006a
ArduPlane: remove duplicate fail-safe time check
2020-07-28 08:04:50 +10:00
Iampete1
62354527d4
Plane: zero throttle nudge in RC failsafe
2020-07-28 08:03:16 +10:00
Mark Whitehorn
d5b1b20274
Plane: implement manual forward throttle for QACRO, QSTABILIZE and QHOVER
...
add parameter Q_FWD_THR_MAX for scaling manual throttle
allow forward motor tilt when disarmed
add FWD_THR_CH as an RC option
change Q_FWD_THR_MAX to percent
change RC_OPTION FWD_THR to 209
move assignment of rc_fwd_thr_ch to one_second_loop
move arming check from forward_throttle_pct to set_servos
change Q_FWD_THR_MAX TO Q_FWD_MANTHR_MAX
expand description of Q_FWD_MANTHR_MAX
add pre-arm check for VTOL manual forward throttle
change VTOL fwd throttle input to percent
2020-07-07 08:37:46 +10:00
Peter Barker
74dbcac40e
ArduPlane: log disarm method
2020-02-22 12:16:29 +11:00
Peter Barker
c93d17b4b2
ArduPlane: use enum-class for SRV_CHANNEL_LIMIT_TRIM and friends
2019-11-26 10:17:17 +11:00
Randy Mackay
edb5f05339
Plane: minor comment changes
2019-10-22 07:15:48 +08:00
Andrew Tridgell
296ce5a409
Plane: fixed throttle failsafe for FS_SHORT_ACTN=3
...
this is a replacement for #12043
many thanks to @Jaaaky for finding this issue
2019-08-26 17:20:24 +10:00
Michael du Breuil
ea64077f77
Plane: Remove redundant protection
2019-08-20 23:59:06 +01:00
Peter Barker
400aa53654
Plane: move arming-related functionality into parent classes
...
Logging moves up
arming via mavlink moves up
arming via switch moves up
2019-05-30 07:37:30 +09:00
Peter Barker
f09822a400
Plane: adjust for desired spool state and spool state renames
2019-04-14 12:18:03 +09:00
Tom Pittenger
0270c57530
Plane: massive refactor and creation of Mode class
2019-04-02 16:28:52 +11:00
Peter Barker
ca7566fff9
Plane: use enum class for ArmingMethod and ArmingRequired
2019-03-12 19:48:14 +11:00
Andrew Tridgell
a278a152fc
Plane: fixed throttle nudge
...
broken by recent radio input changes
Thanks to Michael for noticing!
2019-02-22 18:41:34 +11:00
Andrew Tridgell
d7abf27ec2
Plane: fixed servo jitter due to airspeed estimate from throttle
...
when we have no other airspeed source and we are armed we get airspeed
from throttle. the default setting of k_throttle in the radio code
caused an oscillation of the value used in the airspeed estimate, each
time a RC frame came in.
2019-02-22 10:27:36 +11:00
Michael du Breuil
5134af2298
Plane: Manage quadplane throttle during RC failsafe
2019-02-19 20:41:05 -07:00
Andrew Tridgell
03f1deca9f
Plane: support REVERSE_THROTTLE rc option
...
this provides a more convenient way to setup for reverse throttle
2018-11-16 08:33:35 +11:00
Andrew Tridgell
da69bf3391
Plane: added an abstraction for reverse thrust
...
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Randy Mackay
d6a102234e
Plane: rename rudder_arming to get_rudder_arming_type
2018-09-11 19:34:39 +10:00
Randy Mackay
96d494c2e8
Plane: use parent AP_Arming rudder value
2018-09-11 19:34:39 +10:00