Jason Short
265c5255a3
Added slow_wp default in AP mode
2012-02-19 13:15:40 -08:00
Jason Short
336441b109
reset slow_WP option at mode switch
2012-02-19 13:13:42 -08:00
Jason Short
81a861c8ac
Added slow wp option in calc_desired_speed
2012-02-19 13:13:21 -08:00
Jason Short
33d4d52a6b
set Slow WP option for RTL in Auto mode
2012-02-19 13:12:23 -08:00
Jason Short
cae49b3543
Added "slow WP" option for RTL.
2012-02-19 13:11:59 -08:00
Jason Short
b54d08f410
Updated manual throttle control during throttle hold
2012-02-19 12:40:51 -08:00
Jason Short
bcd5129f9b
added workaround for resetting alt.
2012-02-19 12:40:08 -08:00
Jason Short
fa32b084bd
Added SW test for Manual Boost
2012-02-19 12:39:40 -08:00
Jason Short
1c9bb25f09
AP TEST fixes for new throttle control
2012-02-19 12:38:57 -08:00
Randy Mackay
9fabdb5797
TradHeli - change throttle range back to 0~1000 (was temporarily changed to be 1250~850 which limited the range of the swash plate's vertical movements)
2012-02-20 00:27:12 +09:00
ellissu
6cf7f45f2e
Edit and Add some Traditional Chinese translation
2012-02-19 21:36:04 +08:00
Andrew Tridgell
4a766e1abd
autotest: lower throttle level for lowering altitude in loiter
...
we were not dropping altitude in the change_alt test
2012-02-19 23:21:09 +11:00
Andrew Tridgell
9700afaf10
autotest: fixed failsafe test
...
increased timeout, added check for home location, and fixed failure
testing on timeout
2012-02-19 22:52:09 +11:00
Randy Mackay
e146f225b1
ArduCopter - remove unnecessary block for next GPS value before saving home location
2012-02-19 15:38:40 +09:00
Andrew Tridgell
66b95c14c5
autotest: added build_all.sh to autotest
2012-02-19 17:05:28 +11:00
Andrew Tridgell
08d730c266
scripts: added some more builds to build_all.sh
2012-02-19 17:05:28 +11:00
Andrew Tridgell
df8a557630
AP_Param: update users of AP_Param for ParamToken
2012-02-19 17:05:28 +11:00
Andrew Tridgell
53b87229ff
AP_Param: added ParamToken type for variable list traversal
2012-02-19 17:05:28 +11:00
Andrew Tridgell
a0d4e940ef
Heli: added heli build to build_all.sh script
...
ensure heli builds are tested
2012-02-19 16:34:43 +11:00
Andrew Tridgell
12327eb2a9
Heli: fixed some 'used before initialised' warnings
2012-02-19 16:34:43 +11:00
Jason Short
028de5d2c5
Axis lock beta (off by default)
2012-02-18 21:16:19 -08:00
Jason Short
885710fce6
updated max throttle define
2012-02-18 21:14:13 -08:00
Jason Short
05024cc06c
Change 800 to a define
2012-02-18 21:13:28 -08:00
Jason Short
04b70ffdc2
added Axis_Lock params
2012-02-18 21:13:06 -08:00
Jason Short
ff2b4ecb7a
updated throttle range
2012-02-18 21:11:06 -08:00
Jason Short
1e37a0ec17
added a limit to range output
2012-02-18 21:08:17 -08:00
Jason Short
1b46daa12e
some better defaults for JDrones
2012-02-18 14:23:21 -08:00
Randy Mackay
b92d7aaad5
ArduCopter - fix for yaw control on Octa Quad Plus frame.
2012-02-18 22:04:09 +09:00
Randy Mackay
232359186e
TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde.
...
also renamed heli parameters from _coll_ to the more descriptive _collective_
2012-02-18 20:57:51 +09:00
Randy Mackay
b64c0da003
ArduCopter - updated version to 2.4
2012-02-18 18:44:29 +09:00
Randy Mackay
33aa6fe13b
Optflow - added reference to FastSerial to resolve compile error on Arduino 1.0.
...
also removed reference to DCM (no longer required) and removed some old code.
2012-02-18 18:09:40 +09:00
Andrew Tridgell
92b3f86996
autotest: removed the pitch trim from the Rascal
...
This interferes with the calculation of the centripetal acceleration
calculation in the DCM code. We need a new way of handling pitch trim
2012-02-18 19:27:15 +11:00
Andrew Tridgell
9793d04ed1
SITL: increase the amount of noise in the simulated ADC
...
this increases the noise to 2 bits, which actually can have the effect
of improving accuracy, as it leads to better averaging
2012-02-18 19:27:15 +11:00
Andrew Tridgell
d52cb7e574
DCM: only add in centripetal accel if we have GPS lock
...
if we don't have a GPS or the GPS doesn't have a good lock then we
can't rely on the ground speed for adjusting the acceleration vector
2012-02-18 19:27:15 +11:00
Andrew Tridgell
ffa3330f93
autotest: fixed the calculation of the acceleration due to gravity
...
this fixes the attitude calculation for the multicopter simulation
2012-02-18 19:27:15 +11:00
Andrew Tridgell
16009777d9
APM: expanded parameter area to match ACM
...
this ensures waypoints and basic eeprom layout remain in sync
2012-02-18 10:51:57 +11:00
Andrew Tridgell
6929226b96
ACM: expanded EEPROM parameter area by 256 bytes
2012-02-18 10:51:57 +11:00
Andrew Tridgell
bb352c6bcf
don't need AP_Math.h here any more
2012-02-18 10:51:57 +11:00
Andrew Tridgell
718a5b70e3
AP_Param: fixed saving of sensor calibration
...
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
2012-02-18 10:51:57 +11:00
Andrew Tridgell
baac883eb1
IMU: move _sensor_cal to general IMU class
...
this makes it available both in shim and INS subclasses
2012-02-18 10:51:57 +11:00
Andrew Tridgell
882cd4ea83
AP_Param: moved AP_Vector3f and AP_Matrix3f declarations to AP_Math.h
...
this avoids us needing AP_Math.h in every utility sketch and example
2012-02-18 10:51:57 +11:00
Andrew Tridgell
85ecb05261
CPUInfo: added timing of sqrt()
2012-02-18 10:51:57 +11:00
Andrew Tridgell
78babd37fa
APM: use set_and_save_ifchanged() for GCS stream rates
...
this avoids a lot of EEPROM scan operations when the groundstation
updates the stream rates
2012-02-18 10:51:57 +11:00
Andrew Tridgell
4b15b63d21
AP_Param: fixed copy-assignment operators for AP_Param vectors
2012-02-18 10:51:57 +11:00
Andrew Tridgell
7f3858cb7f
AP_Param: added a set_and_save_ifchanged() method
...
this can be used to avoid the scan() in more frequenctly saved
variables, such as the MAVLink stream rates in APM
2012-02-18 10:51:57 +11:00
Andrew Tridgell
80a6773b8b
AP_Param: added an initialised() method
...
this will be used by the compass code
2012-02-18 10:51:57 +11:00
Jason Short
b532cb91b1
added Rate_D tuning value
2012-02-17 15:23:59 -08:00
Jason Short
0075901f77
upped rate loop to 250hz
2012-02-17 15:23:59 -08:00
justinbeech
62b104cbfa
Found free extra 256 bytes of RAM eliminate _clz use from libgcc
...
Believe it or not, changing / 2^31 to >>31 saved 256 bytes in the "d" segment.
The reason is that GCC version prior to 4.3.5 does not have a count_leading_zeros (clz) assembler macro, so it uses a 256 byte lookup table called _clz
The _clz table gets pulled in if you do 64 bit division.
This tiny change is the only place that we do long long division.
Changing to a shift saves 256 bytes of ram.
2012-02-17 09:46:05 +00:00
Michael Oborne
e2c15008c2
APM Planner 1.1.37
...
fix misc errors
update polish
fix linux/mac bug. - seems alot more stable
2012-02-17 17:09:27 +08:00