Andrew Tridgell
e4ce2f532b
HAL_ChibiOS: make smaller builds possible
...
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
67993d6e5c
HAL_ChibiOS: re-instate priority boost system
...
this adds back in the priority boost system for the main thread when
waiting for a IMU sample. This significantly improves scheduling
performance on very busy boards like a PH2.1
2018-04-07 09:10:29 +10:00
Andrew Tridgell
51c40a013b
HAL_ChibiOS: added IRQ save/restore to hal.scheduler
...
these are used by RPM driver
2018-04-07 09:10:29 +10:00
Francisco Ferreira
e4382c2232
AP_HAL_ChibiOS: fix CAN thread name
2018-02-28 11:37:55 +09:00
Andrew Tridgell
427e00dd41
HAL_ChibiOS: switched to system timer for AP_HAL::micros()
...
this uses the ChibiOS system timer instead of a separate GPT timer for
the core ChibiOS timer. The advantage is it saves us a timer, plus it
changes ChibiOS to use a 1MHz clock on its timer, which gives us
higher resolution for delays.
This has a remarkable effect on timing jitter, reducing it greatly
2018-02-14 18:27:00 +11:00
Andrew Tridgell
b7c4dea9d3
HAL_ChibiOS: gain back 250usec in loop time
...
if we have already called delay_microseconds_boost() then we know
we've given up time to drivers, so we can avoid the extra delay in the
HAL
2018-02-13 17:15:05 +11:00
Mark Whitehorn
da69832140
AP_HAL_ChibiOS: add #ifdef around toneAlarm thread stack declaration
2018-02-13 07:27:02 +11:00
Mark Whitehorn
59b2d44323
AP_HAL_ChibiOS: make ToneAlarm compilation conditional on presence of
...
alarm pin
2018-02-11 14:55:23 +11:00
Mark Whitehorn
fb142422f6
AP_HAL_ChibiOS: pull ALARM_CHANNEL into pwmGroup
...
and improve formatting of HAL_PWM_ALARM in hwdef.h
2018-02-11 14:55:23 +11:00
Mark Whitehorn
8b216cf182
AP_HAL_ChibiOS: add ToneAlarm thread
...
fmuv4 hwdef.dat: remove PWM label from buzzer output pin
add buzzer pin labeled ALARM
remove timer PWM from HAL_PWM_GROUPs
2018-02-11 14:55:23 +11:00
Andrew Tridgell
875008f2a6
HAL_ChibiOS: lock all DMA channels on reboot
...
this fixes a problem with the ICM-20789 on I2C where a reboot while the bus is active
leaves the IMU in a dead state where it can't be recovered without a power cycle.
2018-02-08 17:36:33 +11:00
Andrew Tridgell
dce4c90467
HAL_ChibiOS: moved UART thread to UART driver
...
use an event model for triggering sends from tx complete DMA handler
for unbuffered uarts
2018-02-07 20:33:45 +11:00
Andrew Tridgell
6b187b393a
HAL_ChibiOS: fixed fmuv4 build
2018-02-07 20:33:45 +11:00
Siddharth Purohit
e1a8bba58b
HAL_ChibiOS: increase the stack size for uavcan thread
2018-02-07 20:33:45 +11:00
Siddharth Purohit
f2e77ab773
AP_HAL_ChibiOS: add uavcan thread
2018-02-07 20:33:45 +11:00
Andrew Tridgell
ecce2a73d0
HAL_ChibiOS: Storage::_timer_tick is an override
2018-02-07 20:33:45 +11:00
Andrew Tridgell
865e4f3104
HAL_ChibiOS: implement _timer_tick in UARTDriver
2018-02-07 20:33:45 +11:00
bugobliterator
f7ac5aa079
HAL_ChibiOS: put rcin on a separate thread
2018-01-20 17:40:07 +11:00
Andrew Tridgell
7c23e33775
HAL_Chibios: set min output rate for oneshot to 100Hz
...
this will keep ESCs happy during gyro cal
2018-01-20 17:40:07 +11:00
Andrew Tridgell
f14a847b97
HAL_ChibiOS: rename classes to remove 'Chibi'
...
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
2018-01-15 11:46:02 +11:00
Andrew Tridgell
8b6bab7b17
HAL_Chibios: added ChibiOS HAL
...
this is based on initial work by Sid, reset here for easier merging
2018-01-15 11:46:02 +11:00