Andy Piper
7e29b7bdf6
AP_HAL_ChibiOS: T-Motor H743 Mini
2023-10-13 16:28:51 +09:00
Andy Piper
5b489ec140
AP_HAL_ChibiOS: provide mcu defaults in betaflight conversion
2023-10-13 16:28:51 +09:00
Andy Piper
d9b5bcbd9d
AP_HAL_ChibiOS: correct hwdef generator battery scale
2023-10-13 16:28:51 +09:00
Andy Piper
8d6b6e478c
AP_HAL_ChibiOS: cope with different IMU drivers in hwdef conversion
2023-10-13 16:28:51 +09:00
Andy Piper
7e40b64dad
hwdef: mRoControlZeroOEMH7 bdshot version
2023-10-13 16:28:51 +09:00
Andy Piper
997066ef1a
hwdef: correct inversion pin on MambaF405v2
...
correct battery setup for MambaF405v2
provide suitable serial defaults for MambaF405v2
reallocate DMA channels to allow full DMA on USART3 and NeoPixel on MambaF405v2
add camera control pin to MambaF405v2
2023-10-13 16:28:51 +09:00
Andy Piper
c74e96528b
AP_HAL_ChibiOS: betafpv F450 AIO hwdef
2023-10-13 16:28:51 +09:00
Andy Piper
3c870e0b10
AP_HAL_ChibiOS: allow 8 bdshot channels on mRoControlZeroH7
2023-10-13 16:28:51 +09:00
Andy Piper
ca846443d1
AP_NavEKF: fallback to no baro on boards that have no baro
2023-10-13 16:28:51 +09:00
Paul Riseborough
6040541973
AP_NavEKF3: Allow operation with EK3_SRCx_POSZ = 0 (NONE)
2023-10-13 16:28:51 +09:00
Paul Riseborough
089c278b42
AP_NavEKF: Allow EK3_SRCx_POSZ to be set to 0 (NONE)
2023-10-13 16:28:51 +09:00
Andy Piper
23c8142a6c
AP_NavEKF3: allow high values of EK3_ALT_M_NSE for boards without baros
2023-10-13 16:28:51 +09:00
Davide_Lentini
c1df42300e
AP_HAL_ChibiOS: Update luminousbee5 defaults.parm
2023-10-13 16:28:51 +09:00
Mohammad Hefny
e5439fa321
AP_HAL_Linux: Fix RPI check using enumerations
2023-09-14 14:17:01 +09:00
Henry Wurzburg
a12de9efb3
AP_HAL_ChibiOS:improve MambaF405MINI defaults
2023-09-14 14:17:01 +09:00
Andrew Tridgell
8a27db4f48
hwdef: get airbotf4 building with 4.4
...
minimize, same as master
2023-09-14 14:17:01 +09:00
Martin Luessi
df2d268f78
AP_HAL_ChibiOS: Add RADIX2HD target
2023-09-14 14:17:01 +09:00
Martin Luessi
d19608c922
AP_HAL_ChibiOS: Allow custom STM32_PLL1_DIVQ_VALUE for H7
2023-09-14 14:17:01 +09:00
yjuav
ca64817ee2
hwdef: add YJUAV_A6SE board support
2023-09-14 14:17:01 +09:00
Andy Piper
bef905d357
AP_HAL_ChibiOS: use old CRT1_AREAS_NUMBER
2023-09-14 14:17:01 +09:00
Martin Luessi
fc8ea7797d
AP_HAL_ChibiOS: RAM initialization and linker files changes for external flash targets
2023-09-14 14:17:01 +09:00
Martin Luessi
8d5ccec3da
AP_HAL_ChibiOS: Use custom H750 linker script
2023-09-14 14:17:01 +09:00
Martin Luessi
120391bfd2
AP_HAL_ChibiOS: Fix H750 linker script
2023-09-14 14:17:01 +09:00
Martin Luessi
3614b23669
AP_HAL_ChibiOS: Allow custom linker script, change extflash linker script
2023-09-14 14:17:01 +09:00
Martin Luessi
784eb8d2aa
AP_HAL_ChibiOS: Move scheduler task table to RAM for H750
2023-09-14 14:17:01 +09:00
Martin Luessi
2781f7bf73
AP_HAL_ChibiOS: Add libgcc comment to H750 linker script
2023-09-14 14:17:01 +09:00
Martin Luessi
37aa7fae05
AP_HAL_ChibiOS: Use DTCM for vector table for external flash targets
2023-09-14 14:17:01 +09:00
Martin Luessi
fe9d7a559a
AP_HAL_ChibiOS: Move more time critical code to RAM for H750
2023-09-14 14:17:01 +09:00
Martin Luessi
8d89c55f3e
AP_HAL_ChibiOS: increase FLASH_RAM and rename FDCAN to CAN for H750
2023-09-14 14:17:01 +09:00
Martin Luessi
4e1cb97017
AP_HAL_ChibiOS: Copy vector table to RAM if external flash is primary
2023-09-14 14:17:01 +09:00
Martin Luessi
98a6153bec
AP_HAL_ChibiOS: Change linker script so vector table can be copied to RAM for external flash targets
2023-09-14 14:17:01 +09:00
Martin Luessi
f096cb0fb2
AP_HAL_ChibiOS: Allow custom STM32_QSPISEL for H7
2023-09-14 14:17:01 +09:00
Andrew Tridgell
daad477d84
AP_Scripting: added docs for log_file_content
2023-09-05 19:42:25 +09:00
Davide_Lentini
9d586b077a
AP_HAL_ChibiOS: luminousbee5 hwdefs and default.parm update
...
fix: restored storage folders for luminousbee5 in hwdef
2023-09-05 19:42:25 +09:00
Willian Galvani
a61ad60c86
AP_MotorsUGV: add asymmetry factor for skid-steering
...
Co-authored-by: Iampete1 <iampete@hotmail.co.uk>
2023-09-05 19:42:25 +09:00
Andrew Tridgell
b2180e037f
AP_Scripting: added log_file_content method
...
this allows for aerobatics to log the schedule for easier log review
2023-09-05 19:42:25 +09:00
Andy Piper
60033df55a
AP_HAL_ChibiOS: pull RTS lines low on Pixhawk6C to avoid glitches on startup
2023-09-05 19:42:25 +09:00
Willian Galvani
b4a8d595c9
AP_HAL_Linux: update Navigator available GPIOs
...
The comment was wrong. gpio 26 is actually used for the PCA Output Enable signal.
This also adds GPIO18, which is the one broken out to the PWM0 pin
2023-09-05 19:42:25 +09:00
Iampete1
25a78ce936
AP_BattMonitor: UAVCAN: allow battery reset if not using CAN SoC
2023-09-05 19:42:25 +09:00
Paul Riseborough
ca710df64f
AP_NavEKF3: Update EK3_GLITCH_RADIUS metadata
2023-09-05 19:42:25 +09:00
Paul Riseborough
9f19908cbe
AP_NavEKF3: increase innovation variance instead of clipping innovations
2023-09-05 19:42:25 +09:00
Paul Riseborough
eeb0be2601
AP_NavEKF3: Provide option to clip velocity and position innovations
2023-09-05 19:42:25 +09:00
Andy Piper
5b33edb93c
AP_HAL_ChibiOS: add 8 bi-directional dshot channels to KakuteH7-Wing
2023-09-05 19:42:25 +09:00
Peter Barker
698a036973
hwdef: qiotek: correct HAL_BATT_MONITOR_DEFAULT define name
2023-09-05 19:42:25 +09:00
Peter Barker
3b47729182
hwdef: add hwdef for SDMODELH7V1
2023-09-05 19:42:25 +09:00
Andrew Tridgell
471f847245
GCS_MAVLink: fixed corruption of FTP reply component ID
...
this led to not being able to do FTP transfers with
support.ardupilot.org unless MissionPlanner used the same component ID
as the support engineer GCS
2023-09-05 19:42:25 +09:00
Andrew Tridgell
90663fd47b
AP_Param: fixed parameter defaults array length handling
...
we need to add up the total for all comma separated parameter files
2023-09-05 19:42:25 +09:00
Andrew Tridgell
0fc1b94941
AP_UAVCAN: make himark servo optional in build
...
and only allocate handlers if enabled
2023-09-05 19:42:25 +09:00
Andrew Tridgell
e2b551377f
AP_UAVCAN: added Hobbywing ESC support
2023-09-05 19:42:25 +09:00
Andrew Tridgell
659885419a
AP_PiccoloCAN: expand servo status logging
2023-09-05 19:42:25 +09:00