df8e8c64e8
AP_L1_Control: use projected position for turns
2013-08-13 12:07:34 +10:00
9c88872ad0
AP_L1_Control: use a better ground speed estimate at low speeds
...
this should prevent a rover going in the wrong direction at the start
of a mission
2013-08-13 12:07:34 +10:00
953051b49e
AP_L1_Control: added lateral acceleration interface
...
this will be used by the Rover code for steering
2013-08-12 13:38:38 +10:00
cf4a74cfb8
AP_L1_Control: fix for new AP_Math API
...
Pair-Programmed-With: Brandon Jones <brnjones@gmail.com>
2013-08-05 10:24:02 +10:00
0c64c800b3
AP_L1_Control : Fixed bug in track capture angle limit
2013-08-02 21:47:45 +10:00
097718e833
AP_L1_Control: scale loiter and wp radius with altitude
...
this should keep the aircraft stable in loiter at very high altitudes
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-22 12:50:01 +10:00
86db955ac9
AP_L1_Control: fixed indent-tabs-mode
2013-05-30 09:54:53 +10:00
9f309a2aa6
AP_L1_Control: Remove potential nan errors
...
If WP A and B were the same or ground speed was exactly zero, then the
previous code would produce a nan output. Protection against these
two cases has been added.
If WP A and B are equal, we track directly to the target waypoint
2013-05-13 11:27:51 +10:00
9654546b5a
AP_L1_Control: Cleaned up calculation of damping to reduce computations
...
also removed _cross2D, using math library instead
2013-05-05 21:51:08 +10:00
ba83950fc4
libraries: replace constrain() with constrain_float()
...
this makes the type much more obvious. Thanks to Tobias for the
suggestion.
2013-05-02 10:25:40 +10:00
c067fa2660
L1_Control: make NAVL1_DAMPING docs clearer
2013-04-29 14:24:34 +10:00
84ed37938d
Plane : AP_L1_Control : Replaced division by constants with multiplies and adjusted default L1 period to 25 seconds
2013-04-28 14:47:59 +10:00
9ff0888a17
AP_L1_Control : Fixed potential divide by zero in Nu1 angle calculation
2013-04-15 21:11:30 +10:00
97bfd16bd1
L1_Control: constrain the roll to handle floating point errors
2013-04-15 14:29:39 +10:00
571c48b9d5
L1_Control: cleanup some unused code and variables
2013-04-15 10:52:32 +10:00
a423d102e0
Plane : AP_L1_Control : Fix wrong way turn behaviour on loiter entry
2013-04-15 10:52:32 +10:00
181f7368a3
AP_L1_Control: change turn_distance() to be min of wp_radius and L1 distance
...
this gives less surprising behaviour for users
2013-04-15 10:52:32 +10:00
dca597cda1
L1_Control: added a comment on speed of the L1 control code
2013-04-12 12:58:20 +10:00
a3c2851120
AP_L1_Control: Addition of library for geometry calculations required for L1 Control.
...
1) Explicit control of tracking loop period and damping which removes previous
variation in period with speed and fixed damping ratio
2) Explicit control of track capture angle (now set to 45 degrees by default)
3) Removal of restriction on loiter radius being greater than L1 distance
The circle(loiter) control is a L1 and PD hybrid utilising L1 for waypoint capture and PD control for circle tracking.
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
Pair-Programmed-With: Andrew Tridgell <tridge@samba.org>
2013-04-12 12:48:09 +10:00
Andrew Tridgell
Paul Riseborough
Brandon Jones