Andrew Tridgell
83cfcd841b
AP_Periph: added support for SERIAL_OPTIONS
...
allows for options and flow control per serial port
2023-12-27 05:13:14 -07:00
Andrew Tridgell
cd72dcb73f
AP_Periph: use a 1s deadline for packets
...
this fixes an issue with early discard of packets on MCUs with small
number of transmit slots and higher packet send count
2023-12-19 18:56:46 +11:00
Andrew Tridgell
0a4eb251c6
AP_Periph: disable UART reboot check for non-debug builds
...
this was causing loss of bytes on GPS peripherals as the reboot check
swallowed data. The option is really only meant for debug builds to
make ./waf AP_Periph --upload work, so disable by default on non-debug
builds
we could just remove this option where it is in hwdef.dat files, but I
know quite a few peripherals are out-of-tree, so this catches the
error for those too
the symptoms were high GPS delta values
2023-11-29 12:53:01 +11:00
Tom Pittenger
7da434d1e0
AP_Periph: fix include order network build error
2023-11-29 12:29:19 +11:00
Tom Pittenger
0b60777db6
AP_Periph: add Networking-UART passthrough
2023-11-26 11:28:57 +11:00
Michael du Breuil
00a5c92635
AP_Periph: Rate limit EFI driver updates
...
Also remove the last update variables for features that were compiled
out.
2023-10-17 10:14:03 +11:00
Peter Barker
566371837c
Tools: add and use HAP_PERIPH_ENABLE_RTC
2023-10-11 19:17:27 +11:00
Peter Barker
748dd22f4e
AP_Periph: instantiate AP_AHRS even if not in SITL
...
Closes potential problem with HerePro if it calls AP_AHRS methods
2023-10-04 18:10:58 +11:00
Andrew Tridgell
bb004c499f
AP_Periph: fixed ADSB peripheral to send heartbeat
...
and remove duplicated mavlink bindings
2023-10-02 21:45:28 +11:00
Andrew Tridgell
50ae89ed8c
AP_Periph: support per-cell info in periph battery monitoring
...
useful for SMBus batteries
2023-10-02 21:45:28 +11:00
Michael du Breuil
6897dd08ef
Tools: AP_Periph: Add CAN_MIRROR
...
This allows us to mirror CAN traffic between ports on demand.
2023-09-19 12:17:28 +10:00
Tom Pittenger
ea207c4b4a
AP_Periph: add AP_PERIPH_SAFTEY_SWITCH_ENABLED
2023-09-19 09:29:26 +10:00
Andrew Tridgell
a732f846e6
AP_Periph: moved CAN_APP_NODE_NAME to AP_Periph.h
...
needed by battery driver
2023-09-05 06:56:51 +10:00
Andrew Tridgell
0c38dada6c
AP_Periph: re-structure peripheral code
...
split into separate cpp files and avoid static functions
2023-09-01 13:04:59 +10:00
Tom Pittenger
4f2344f397
AP_Peirph: fix battery parameters
2023-08-28 09:14:33 -07:00
Andrew Tridgell
bc825fb4c1
AP_Periph: added battery balance plug node
...
this supports a periph node attached to a LiPo battery balance plug,
reporting via BatteryInfoAux
2023-08-26 21:12:42 +10:00
Andrew Tridgell
698e38e849
AP_Periph: allow SITL periph with more devices
2023-08-24 13:06:40 +10:00
Peter Barker
9fb872cdd7
AP_Periph: move RC IN parameters to sub-object
2023-08-19 20:27:24 +10:00
Peter Barker
ee0a49bb7c
AP_Periph: add support for DroneCAN RCInput packets
2023-08-19 20:27:24 +10:00
Tom Pittenger
1a67775c52
AP_Periph: add AP_RPM support
...
Co-authored-by: Samuel Tabor <samuel.tabor@krausaerospace.com>
2023-08-11 13:31:45 -07:00
Tom Pittenger
88cc72f0ee
AP_Periph: add networking
2023-08-06 09:20:08 +10:00
Tom Pittenger
3bd1b3f7ed
AP_Periph: add support for Networking
2023-08-06 09:20:08 +10:00
Peter Barker
3c46db5261
AP_Periph: rename ins locals to avoid conflict with ins member variable
2023-08-01 11:37:14 +10:00
Andrew Tridgell
946840cc99
AP_Periph: added targetted tunnel message for CAN serial passthru
...
this allows for remote control of serial devices over DroneCAN
2023-07-12 17:06:02 +10:00
bugobliterator
b6605f5877
AP_Periph: add CAN and Protocol statistics send
2023-07-10 12:56:37 +10:00
Peter Barker
30dea46cc5
AP_Periph: make canard_broadcast non-static
...
so it can be used from other files in AP_Periph
2023-07-05 14:37:51 +10:00
Peter Barker
5a33f870c0
Tools: use HAL_PROXIMITY_ENABLED in place of HAL_PERIPH_ENABLE_PRX
...
boolean truth rather than defines, and simplifies code
2023-06-08 11:53:01 +10:00
Michael du Breuil
e2d0cc55d0
AP_Periph: Support APD ESC telemetry
2023-05-25 17:35:27 -07:00
Peter Barker
274379ea8a
AP_Periph: include AP_ESC_Telem header
...
... since we insantiate one of these we should include its header
2023-05-09 10:56:13 +10:00
Peter Barker
6c29079a76
AP_Periph: correct includes
...
we instantiate SerialManager - best include its header!
2023-05-09 10:56:13 +10:00
Peter Barker
ddcfe5e734
Tools: move and rename CAN Driver_Type enumeration
2023-04-20 08:53:46 +10:00
Tom Pittenger
34a990d2ff
AP_Periph: add AP_KDECAN support
2023-04-17 11:52:52 +10:00
Peter Barker
7995bc5175
Tools: add and use option to compile SLCAN support out of code
2023-03-15 19:08:09 +11:00
Tom Pittenger
95b4ded3e8
AP_Periph: add AP_NMEA_Output to Periph
2023-02-07 21:12:07 +11:00
Andrew Tridgell
69cb6796f3
AP_Periph: send GNSS Heading message
...
if not sending RelPosHeading then send Heading message if we have yaw
2022-12-20 10:23:58 +11:00
rishabsingh3003
27f55ae626
AP_Periph: Add proximity support
2022-12-15 07:20:05 +11:00
James O'Shannessy
4679cb4265
AP_Periph: Add timeout to ESC driving when CAN packets are lost
...
Fixes a periph continuing to drive an ESC to an output when the esc_rawcommand packets are lost
2022-12-03 13:55:01 +11:00
Tom Pittenger
3f4755ea7b
AP_Periph: add support for AP_TemperatureSensor
2022-10-18 10:05:31 +11:00
Tom Pittenger
53e0c4175e
AP_Periph: add support for SLCAN
2022-10-11 11:26:40 +11:00
Andy Piper
8ee5c8735d
AP_Periph: delegate dshot configuration to BLHeli. Make esc telemetry output rate configurable
...
correct SRV_Channel initialization order to get ESC masks correct
2022-09-20 09:45:03 +10:00
Andrew Tridgell
31cac4395f
AP_Periph: support actuator type with PWM
...
this makes debugging much easier in CAN analyser
2022-09-13 16:23:44 +10:00
Andrew Tridgell
1fab01951a
AP_Periph: build fix
2022-09-05 12:35:37 +10:00
Andrew Tridgell
2f3fe19aca
AP_Periph: use AP_CheckFirmware
2022-08-15 09:18:34 +10:00
Andrew Tridgell
f728894eec
AP_Periph: added EFI support
2022-06-09 21:10:37 +10:00
Andrew Tridgell
25d231187f
AP_Periph: added RNGFND_MAX_RATE parameter
...
prevent duplicate samples and allow setting of maximum rate we sample
rangefinder
2022-06-09 16:51:56 +10:00
Pradeep
80e2533cf0
AP_Periph: node stats
...
- Added new config parameter object - STAT
- init and update statistics
2022-06-07 09:57:32 +10:00
bugobliterator
7f5dc33e7e
AP_Periph: allow can_printf as periph member method as well
2022-03-23 18:59:43 +11:00
Siddharth Purohit
8a8de73d89
AP_Periph: add support for CANFD trx
2022-03-11 18:13:54 +11:00
bugobliterator
068208e4d7
AP_Periph: add debug option for hold in bootloader after 15s
2022-03-11 18:13:54 +11:00
Andrew Tridgell
94d02faf37
AP_Periph: fixed build for include changes
2022-02-22 12:13:19 +11:00