Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,973 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

127 Commits

Author SHA1 Message Date
rmackay9 e5d8efdb7e ArduPlane: replaced many "int" with "int16_t", "long" with "int32_t" 2012-08-18 18:26:13 +09:00
Andrew Tridgell 2fb8a13ac6 APM: added parameter FBWB_ELEV_REV 
this fixes issue 343
 2012-08-17 15:04:53 +10:00
Andrew Tridgell 20be77ab32 APM: when land_complete is true, use land_pitch 
this gives a flare on final landing
 2012-08-15 12:39:35 +10:00
Andrew Tridgell f4023d1b44 AP_Airspeed: remove airspeed filter and run at 10Hz 
this saves on the filter memory, and gives just as good a result
 2012-08-15 12:39:35 +10:00
Andrew Tridgell 8c3b6f471f APM: keep the time of the last heartbeat message 
this will be used for failsafe processing
 2012-08-15 12:39:34 +10:00
Andrew Tridgell 93f45f232f APM: added 'OBC' failsafe module for ArduPlane 
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.

This includes:

 - manual pin
 - heartbeat pin
 - waypoint for heartbeat failure
 - waypoint for GPS failure
 2012-08-15 12:39:34 +10:00
Andrew Tridgell 98d5a49717 APM: fixed LOITER_TIME and LOITER_TURNS 
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
 2012-08-15 12:39:34 +10:00
Andrew Tridgell 9d9c7b0455 APM: allow for navigation by dead-reckoning 
we now ask AHRS if we have a position estimate, and use that if
available
 2012-08-11 12:01:08 +10:00
Amilcar Lucas 9a8fd4738e Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell 5e19c0cf04 AP_Airspeed: removed values passed to constructor 2012-08-08 16:38:39 +10:00
Andrew Tridgell 67f076a9db APM: change variables to use _cm, _cd and _ms suffix for units 
this makes it less likely that we mix up units
 2012-08-08 12:12:30 +10:00
Andrew Tridgell b366205172 APM: removed cli slider and dipswitch options 
use mavlink/eeprom for all config
 2012-08-08 12:12:29 +10:00
Andrew Tridgell f98b887dbe AP_Param: update ArduPlane core for new AP_Param interface 2012-08-08 12:11:57 +10:00
Amilcar Lucas 03b902d4b7 Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas fe4713b46e RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas 9b31938519 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
Andrew Tridgell 526344ab7c APM: added control switch debouncer 
this adds a switch debouncer, similar to the one used in
ArduCopter. I'm adding this after a flight on the weekend where noise
on the control mode channel caused a mode change away from auto.

To prevent this change adding excessive mode switch latency, it also
moves the reading of the control switch to the 10Hz loop, away from
the 3.3Hz loop. That gives us 0.2s delay in mode switch changes and
allows for spikes in the control mode for 0.1 seconds without changing
mode.
 2012-08-01 13:59:37 +10:00
rmackay9 717d0d25d4 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
Andrew Tridgell cfe19c8f53 APM: update version for 2.50 release 2012-07-26 11:36:17 +10:00
Andrew Tridgell d4599aa4f0 APM: switch back to old nav_roll calculation 
the old nav_roll will be used for the 2.50 release to prevent the need
for re-tuning. For the release after that we will use the new
calculation
 2012-07-26 10:03:36 +10:00
Michael Oborne 7dd58227a6 AP fix sitl hil attitude mode. 2012-07-24 07:18:25 +08:00
Jeff Taylor c083ca5f35 APM: Fixed bug where landing_pitch wasnt initialized properly 
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
 2012-07-19 13:59:30 +10:00
Andrew Tridgell 2121491197 APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer 
it is in cm/s, not m/s
 2012-07-19 11:50:41 +10:00
Amilcar Lucas d911e4f61e Support up to 11 servos in APM2 
Conflicts:

	ArduPlane/ArduPlane.pde
 2012-07-18 22:01:19 +02:00
Andrew Tridgell ead41670c4 Airspeed: change APM to use new AP_Airspeed library 
the next step is AHRS dead reckoning
 2012-07-16 11:21:50 +10:00
Andrew Tridgell d07593b3bb APM: added credit for FBW altitude limit code 
thanks Yuri!
 2012-07-10 08:36:50 +10:00
Andrew Tridgell 7bc724d118 APM: changed PID library to do automatic deltat calculation 
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
 2012-07-06 19:59:18 +10:00
Andrew Tridgell 6ced622da4 APM: fixed some build warnings and type errors 2012-07-06 19:59:18 +10:00
Andrew Tridgell d9351ff681 APM: use new location functions 2012-07-04 12:42:46 +10:00
Andrew Tridgell f150c645c8 Mount: enable mount control via eeprom parameters 
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
 2012-07-03 10:21:01 +10:00
Andrew Tridgell 1cb96e14a9 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Andrew Tridgell 44b7d94b1c APM: ArduPlane updates for new compass interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell 4fda89beb7 APM: update for new barometer interface 
the barometer can now calibrate and return altitude values.

A 0.3 low pass filter is used on altitude to match the previous code
 2012-06-27 16:01:50 +10:00
Andrew Tridgell 7941abad16 APM: prepare for 2.40 release 2012-06-16 10:11:26 +10:00
Amilcar Lucas a12cb8fd9a Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Amilcar Lucas f7ef60565e Add "3 axis camera stabilization" and "point camera to 3D point" functionality 
Patch by Gregory Fletcher and reviewed by me
 2012-06-13 20:55:19 +02:00
Amilcar Lucas e9226d6f0a Spellcheck 2012-06-13 20:44:35 +02:00
Jason Short 8e570fa2d0 Cosmetic changes only. 2012-06-10 13:10:07 -07:00
Andrew Tridgell c034a3a6f7 APM: ready for 2.40-beta 2012-06-08 18:03:21 +10:00
Andrew Tridgell 43fe5bab78 re-enable the AP_Mount build 2012-06-04 19:32:11 +10:00
Andrew Tridgell 18b5933240 AP_Mount: disable AP_Mount until it works with MAVLINK10 2012-06-04 13:14:51 +10:00
Andrew Tridgell 557834f9a9 AirSpeed: added parameter ARSPD_USE 
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
 2012-05-22 20:02:23 +10:00
Andrew Tridgell 116ed39e77 APM: prepare for 2.34 2012-05-14 14:29:59 +10:00
Andrew Tridgell 78d273fa34 Telemetry: make it possible to use UART2 on APM2 
building with TELEMETRY_UART2=ENABLED allows you to use the solder
bridge on the APM2 to enable telemetry on UART2. This allows both USB
telemetry and a radio at the same time.
 2012-05-04 10:39:44 +10:00
Andrew Tridgell 9d56d28615 MAVLink: make APM build with MAVLink 1.0 possible with arduino GUI 2012-04-24 22:24:58 +10:00
Andrew Tridgell 840f7f87ca ready for 2.33 release 2012-04-09 18:16:49 +10:00
Andrew Tridgell 222009002e MAVLink: allow for find grained stream rate control 
streams can now be requested at any multiple of 20ms. So if you ask
for a stream at 7Hz then you will get it at close to 7Hz.
 2012-04-02 11:18:53 +10:00
Andrew Tridgell 5dbd2a2b60 APM: enable AP_Declination by default 2012-03-30 14:25:27 +11:00
Andrew Tridgell eb98442ed0 APM: Change version to 2.32 2012-03-29 12:50:12 +11:00
Andrew Tridgell 491b73c4e2 APM: increase ArduPlane version to 2.31 2012-03-27 16:13:29 +11:00