6573857a90
AP_Param: support @READONLY marker in param files
...
allows for read-only parameters embedded in firmware
2019-09-12 10:50:30 +10:00
b493805fb4
AP_Param: methods to provide amount of parameter space used
...
AP_Param: provide method for storage size
2019-08-28 11:51:09 +10:00
f897eae89d
AP_Param: enable reduced size support for AP_Periph
2019-08-27 10:29:56 +10:00
2049e86dda
AP_Param: optionally return parameter flags in AP_Param::find(...)
2019-08-22 09:23:56 +10:00
70daf0010b
AP_Param: add param flag bit indicating internal-use-only
2019-08-22 09:23:56 +10:00
40753ab14e
AP_Param: Remove non functional AP_Param ignore flags
2019-06-11 10:28:45 +10:00
2ccb9061d9
AP_Param: minor format fixes
2018-12-06 12:23:41 +09:00
98cd300885
AP_Param: add set_defaults_from_table
2018-12-06 12:23:41 +09:00
4d662a913a
AP_Param: use background parameter save
...
this moves both the storage scan and the save code out of the main
thread and into the IO thread. It means that if we have more than 30
parameters saves in very rapid succession while armed that we can lose
parameter changes, but that is extremely unlikely.
This fixes an issue where parameter saves in flight can cause
considerable scheduling problems, sometimes several milliseconds
2018-08-16 12:40:10 +10:00
1a45aa12f5
AP_Param: warn on last pass only about unknown parameters
...
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
7f0d5ddf21
AP_Param: stop panic()'ing on unknown parameters
...
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.
On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.
This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
c6c5603382
AP_Param: added back key dumping code
...
this is essential for working out conversion tables.
2018-01-24 18:23:59 +11:00
a1a5665213
AP_Param: Support marking a param group as ignoring the enable flag
2018-01-17 22:21:55 +00:00
4ac49483c8
AP_Param: added support for embedded parameters
...
use a block of flash to hold embedded parameters that can be changed
using apj_tool.py
2017-12-18 11:14:59 +11:00
d5896287b7
AP_Param: Add set_by_name and set_and_save_by_name helpers
2017-10-25 21:07:09 +11:00
e3599ab4f9
AP_Param: remove CLI
2017-08-14 10:23:50 +09:00
7e24be95c9
AP_Param: added macro for var table extension in object
2017-05-03 20:12:04 +10:00
47803e73e4
AP_Param: allow for dynamic var_info tables
...
this allows the var_info entry in a table to be a constant pointer,
allowing the selection of a type for a parameter class at runtime.
2017-03-25 16:22:10 +11:00
c93942695f
AP_Param: load parameters from a comma-separated-list
...
This patch will break things for anyone who is using
a comma in their filenames for their ardupilot defaults
files.
2017-02-23 22:46:33 -08:00
fe189fefbc
AP_Param: Factor load_defaults_file (NFC)
2017-02-23 22:46:33 -08:00
79b0c856b2
AP_Param: added support for frame specific parameters
...
this allows for libraries that have parameters that are only activated
on particular frame types
2017-02-14 19:49:29 +11:00
85eadca7ad
AP_Param: shut up float comparison warning
...
We want to compare the value previously set in memory.
2017-02-06 09:27:22 -08:00
4687785185
AP_Param: fixed a bug in default file handling
...
this fixes a bug in how default file values are handled that affects
any common sub-objects. When we had a default value for something like
SERVO12_FUNCTION then configured_in_defaults_file() would return true
for SERVO1_FUNCTION as it shares a common default value pointer
this changes the implementation to use the object pointer instead
2017-01-24 09:50:25 +11:00
a481e52861
AP_Param: make configured() const
2017-01-20 13:02:53 +09:00
d005cbffd8
AP_Param: added convert_parent_class()
2017-01-12 17:39:37 +11:00
05e9462a9c
AP_Param: added CONVERT_FLAG_REVERSE and CONVERT_FLAG_FORCE
2017-01-12 17:39:37 +11:00
0c32178d07
AP_Param: added reload_defaults_file()
...
this allows defaults to be set for parameters in pointer objects
2017-01-12 17:39:37 +11:00
0d6801fbe6
AP_Param: added find_old_parameter() method
...
allows for custom conversion of parameters
2016-12-31 10:55:59 +09:00
be9ac273ce
AP_Param: apply notify check to AP_ParamV too
...
thanks to Francisco
2016-12-09 14:36:01 -08:00
eaa68f32e3
AP_Param: avoid a notify if value is already correct
2016-12-09 14:36:01 -08:00
a3fcebc501
AP_Param: add set_and_notify to vectors
2016-11-15 11:42:54 -08:00
c808ee2f49
Global: To nullptr from NULL.
...
RC_Channel: To nullptr from NULL.
AC_Fence: To nullptr from NULL.
AC_Avoidance: To nullptr from NULL.
AC_PrecLand: To nullptr from NULL.
DataFlash: To nullptr from NULL.
SITL: To nullptr from NULL.
GCS_MAVLink: To nullptr from NULL.
DataFlash: To nullptr from NULL.
AP_Compass: To nullptr from NULL.
Global: To nullptr from NULL.
Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
2bd13af43d
AP_Param: unhide groups when generating parameters in autotest
2016-10-26 09:53:14 +11:00
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
68f0777dac
AP_Param: fixed bug with deeply nested parameter trees
...
enumeration could loop forever if the IDs overlapped due to 8 bit
masking
2016-10-23 15:27:42 +11:00
e6d5bac527
AP_Param: don't used reserved word in macros
...
`class` is a reserved word and should not be used as macro arguments.
It's very common in C++ to use "clazz" instead in these cases.
2016-10-15 15:19:17 -03:00
0d113b265c
Examples: fix examples for px4
...
The change to use AP_BoardConfig messed up the examples. Here are some
updated but there are plenty more to do.
2016-10-04 12:50:47 -03:00
af6d8e3c36
AP_Param: explicitly cast to float to avoid Clang warning
...
/home/travis/build/ArduPilot/ardupilot/libraries/AP_Param/AP_Param.h:542:22: warning: using floating point absolute value function 'fabsf' when argument is of integer type [-Wabsolute-value]
bool force = fabsf(_value - v) < FLT_EPSILON;
2016-04-22 17:33:06 +01:00
5bd034a5a8
Global: start using cmath instead of math.h
2016-04-05 21:06:19 -07:00
86416e8f05
AP_Param: added set_default_by_name()
2016-04-01 16:39:51 +11:00
0530af93aa
AP_Param: allow top level parameters to be pointers
...
this will allow for the attitude_control variable in quadplane to be a
pointer
2016-04-01 16:16:03 +11:00
7d92202db9
AP_Param: save flash space for parameter strings
...
now that we no longer need AVR support we can use nul terminated
strings for parameter names, saving a couple of k of flash space
2016-03-18 13:03:18 +11:00
018c7425a4
AP_Param: added AP_PARAM_NO_SHIFT
...
used for cases where we know the shift is not needed
2016-03-18 12:33:16 +11:00
c15fa950c0
AP_Param: convert_old_parameter becomes public and accepts scaling
2016-03-18 10:04:55 +11:00
12067b27b3
AP_Param: cope with multi-level nesting and zero-idx
...
this copes properly with multi-level nesting of groups, and fixes an
issue with an idx of zero in nested groups
2016-03-18 10:04:55 +11:00
ff04871fc5
AP_Param: fixed a reporting problem with AP_Vector3f
...
if we load an element other than the X element of a Vector3f via
MAVLink then the value reported back to the GCS would be at the wrong
offset in memory. This led to some very confusing results for users
2016-03-16 17:03:30 +11:00
93f0707679
AP_Param: added count_parameters() API
...
this auto-clears when an ENABLE parameter changes
2016-01-06 14:44:34 +11:00
1b8cf84801
AP_Param: allow for up to 512 top level vehicle parameters
...
this will make life a bit easier for copter
2016-01-04 11:14:43 +11:00
29cb0dcf2c
AP_Param: enable variables to be marked as enable variables
...
used to hide unused subtrees of variables
2016-01-04 11:14:42 +11:00
37b2e23322
AP_Param: allow objects containing parameters to be dynamically loaded
...
this makes it possible for objects containing parameters to be
dynamically loaded.
2016-01-04 11:14:42 +11:00
Andrew Tridgell
Peter Barker
Michael du Breuil
Randy Mackay
Lucas De Marchi
Jacob Walser
Lucas De Marchi
Francisco Ferreira
murata
Mathieu OTHACEHE
Andy Little
Ricardo de Almeida Gonzaga