dadad8677e
ArduCopter: added descriptions for most parameters that did not have them
...
Renamed loiter_radius to circle_radius to better reflect it's purpose.
Removed some unused parameters including WP_MODE, WP_MUST_INDEX, LOG_LASTFILE, AXIS_P
2012-12-10 21:45:57 +09:00
f522ef078e
ArduCopter: remove unused functions do_target_yaw, do_loiter_at_location, get_altitude_error and clear_new_altitude
2012-12-10 17:30:50 +09:00
154e3c33f7
ArduCopter, AP_InertialNav: consolidated ThirdOrderComplementaryFilter into AP_InertialNav to save about 200bytes of RAM
2012-12-10 00:43:11 +09:00
8c2423f618
ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde
2012-12-09 15:24:19 +09:00
9dd978576b
ArduCopter: auto yaw changes to allow pilot override of yaw during missions
...
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw). We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
2012-12-08 14:23:32 +09:00
a5bb54e36e
ArduCopter: RTL clean-up and slightly improved landing sensor
...
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
072ffec493
ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position
2012-12-06 10:31:41 +09:00
7035529953
ArduCopter: remove unused get_desired_climb_rate function
2012-12-06 10:31:09 +09:00
3cbef57c64
ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy
...
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
2012-12-06 10:30:49 +09:00
8c18a60766
ACM: Small fix to Yaw Look Ahead
2012-12-04 14:50:14 -05:00
315a7e8000
ACM: Yaw Look Ahead Changes
2012-12-04 13:26:41 -05:00
bcae83c4f6
ACM: make it possible to run CLI on radio port in ArduCopter
2012-11-21 21:41:34 +11:00
dcd98eee78
ArduCopter: remove some variables no longer required with introduction of AP_state
2012-11-12 12:41:25 +09:00
ea7f639ebf
ACM: Added fast descent with Bill P's equation for managed accerlation
2012-11-11 18:23:45 -08:00
fb2180ddcd
ACM : climb rate option using Bill P's equation
2012-11-09 22:15:16 -08:00
d2a5928c06
Ap state updates
2012-11-09 22:15:15 -08:00
2b714ff7b0
ArduCopter: remove unused functions wrap_360f, wrap_180f and wrap_PI
2012-11-08 15:20:08 +09:00
1f801714e8
ArduCopter: incorporate new version of inertial navigation
...
Moved several navigation functions from ArduCopter.pde to navigation.pde
2012-11-07 19:21:31 +09:00
36040461df
ACM : Formatting
2012-10-28 12:12:38 -07:00
5149a8c723
ACM: Added notes, credit to decel code. added speed_min to calc.
2012-10-27 14:13:24 -07:00
4877348c49
ArduCopter: remove some unhelpful constraints on nav_lat and nav_lon.
...
Increase other constraints from 3200 to 32000. These constraints are there to ensure int32_t do not cause an overflow when added to an int16_t.
2012-10-24 22:04:35 +09:00
6a40fcd56a
ACM : fix compiler warning on non returning function
2012-10-21 14:37:42 -07:00
8842a7dc1b
ACM : Cast to int32_T
...
Don't think it really needs it, but I feel better with the cast.
2012-10-21 14:36:05 -07:00
a0752dc7dc
ACM Acceleration management
...
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
2012-10-21 14:32:39 -07:00
401fb4101c
ArduCopter: removed deprecated mag offset routine.
...
Also removed commented-out block of code from navigation.pde.
2012-10-17 19:47:21 +09:00
b3ff368589
ArduCopter: position lead filters modified to use lag which varies by gps
2012-09-20 15:49:09 +09:00
d49df965f3
uncrustify ArduCopter/navigation.pde
2012-08-21 19:19:50 -07:00
77f47a45d0
ACM : Nav rate limit lowered to prevent bad oscillations due to GPS latency.
2012-08-18 09:04:22 -07:00
64cfaf74b7
ArduCopter: renamed "_new_alt" parameter to just "new_alt" in force_new_altitude and set_new_altitude functions
2012-08-18 21:46:48 +09:00
1b7e27658b
ACM : removed old note
2012-08-17 17:03:40 -07:00
bdc1c41e62
ACM: made target bearing the lead filtered location
...
Had some major nav trouble from crosstrack if I used the laggy position.
2012-08-16 15:38:25 -07:00
36f947acb9
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
a72bf6ef57
ArduCopter: replaced abs with labs as required in a few places.
...
Also fixed a small bug in the get_stabilize_pitch function in which it was using the roll (instead of pitch) to decide whether it should let the i term build-up or not.
2012-08-16 17:51:09 +09:00
f1af837543
ACM: Switched to filtered loc
2012-08-14 14:11:52 -07:00
3ad08b7ffc
ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second.
2012-08-10 10:02:32 -07:00
adf5939ba4
ACM: navigation - Alt cleanup, fast corner support
2012-08-09 16:59:44 -07:00
fb26160d3b
ACM: change to use get_bearing_cd() instead of get_bearing()
2012-08-08 12:12:30 +10:00
1d085c8cf4
Added minimum speed for RTL
2012-07-20 13:27:35 -07:00
f46e8468c4
Arducopter: Adjusted speed of climb to not stall out before hitting peak
2012-07-19 17:53:49 -07:00
6506ebf69f
Arducopter: Fix compile issue
2012-07-19 10:09:16 -07:00
2df487ab7b
Arducopter: Slower WP deceleration for RTL and WP navigation
...
Slower descent and slightly faster ascent
2012-07-19 09:50:18 -07:00
c995749aaa
Arducopter
...
upped nav max to 32deg from 30
renamed calc_desired_speed to get_desired_speed
Added get_desired_climb_rate function to do smooth transitions in altitude
modified get_altitude_error to override the older altitude manager.
2012-07-18 22:57:11 -07:00
f73a2004be
Arducopter: INS
...
updated Nav control to use INS
2012-07-18 22:57:10 -07:00
3048d2f9b4
Arducopter: WP_radius
...
Switching to stored WP_radius in meters, just like Arduplane
2012-07-10 21:53:38 -07:00
be763a6ead
ACM: use get_distance_cm() not get_distance()
...
this fixes a bug introduced in 28f2eb6b9
2012-07-11 07:50:07 +10:00
038116f521
Airspeed patch:
...
pre-calculated airspeed resistance pitches copter automatically to gain a certain speed allowing the speed controller to work off of a better set point - similar to Alt hold.
added param tilt_comp with a default of 54 which equals 19.5° of pitch to go 6m/s
upped Z and Y target speeds to int32_t for speed squared calculation
2012-07-09 13:13:32 -07:00
5ed345fe94
ACM: removed some Location functions which are now in AP_Math
2012-07-04 13:44:36 +10:00
c29a0bc3f8
Navigation
...
increased speed governor to get faster WP travel
added param for WP tilt - basically a precalculated I term for wind resistance.
2012-07-03 17:34:50 -07:00
1a6549fef7
removed GPS ground speed calc - was causing some funny business during the transition.
2012-07-03 17:16:14 -07:00
eea788b63f
navigation.pde : Added a drag/velocity prediction filter for improved I term wind correction.
2012-06-29 21:20:28 -07:00
53d2a46cd6
Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s
2012-06-25 23:06:28 -07:00
c42f9ece43
Inertial Control
...
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.
This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.
Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.
The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
9732b7d2dc
navigation.pde:
...
removed unneeded WP_Distance check
remove unneeded return for Navigate
removed unneeded rate_D calcs
removed unused functions
2012-05-17 11:05:05 -07:00
d1cd04486a
removed retro loiter code since Angel has a branch now.
...
shrank speed filter to avoid latency
removed unused forward estimator code
placed code for switchover to gps.groundspeed at 1.5m/s
added clamp for D term when below .5m/s to eliminate noise
added hybrid I-term based on speed error and position
changes Loiter D term to use position rather than acceleration to avoid noise
2012-05-15 22:14:23 -07:00
b2a7227ae7
ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define.
2012-04-23 00:19:18 -05:00
1676e09f12
navigation.pde: Put the new calc_GPS_velocity method in a compiler if that checks the new RETRO_LOITER_MODE config value (saves space and ensures its not being used unless retro loiter mode is enabled)
2012-04-19 10:21:04 -05:00
d29f1ef331
Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff.
2012-04-19 10:16:29 -05:00
d4a4641ae6
navigation.pde: Added calc_GPS_velocity. Added constraint to x/y error and x/y rate error.
2012-04-18 23:06:15 -05:00
fad162989f
ArduCopter - navigation.pde - added logging of Loiter PID controllers
2012-04-11 23:52:25 +09:00
66c4f752e3
ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint
2012-03-20 17:11:22 +09:00
22315cd41a
ArduCopter - Navigation.pde - corrected comment re wp_distance and get_distance to clarify that they are in cm (not meters!)
2012-03-20 16:13:38 +09:00
91b2b48fd8
ArduCopter - bug fix to calc_XY_velocity (was using uninitialised last_longitutde and last_latitude for speed calculations)
2012-03-18 12:11:12 +09:00
427dacba70
ACM: Smoother Speed calcs
2012-03-16 14:10:19 -07:00
7153b94ade
ACM: Disabled D term experiment for Loiter until more testing
2012-03-15 19:20:03 -07:00
468d9c4b4f
ACM: Loiter D performance updates
2012-03-13 10:23:31 -07:00
73e2bd6cd8
ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed.
2012-03-12 13:11:05 -07:00
deed802d1a
ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter.
2012-03-11 23:21:49 -07:00
450f89ec5d
ACM: Added note about scaling rates
2012-03-10 12:43:28 -08:00
eb53200179
ACM: Altered the scaling speed for altitude changes for faster rises.
2012-03-10 12:43:01 -08:00
204f9957b0
ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes.
2012-03-10 12:42:22 -08:00
afc4aceb32
ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde
2012-03-11 01:27:58 +09:00
6e53949c2a
removed Constraint that caused JLN's horizontal drift.
2012-02-26 11:33:37 -08:00
24345d4f43
Loiter updates
2012-02-23 22:03:26 -08:00
81a861c8ac
Added slow wp option in calc_desired_speed
2012-02-19 13:13:21 -08:00
bcd5129f9b
added workaround for resetting alt.
2012-02-19 12:40:08 -08:00
908ca4e915
scaled X velocity
2012-02-16 22:09:22 -08:00
9a3e862b55
added option in code for Loiter specific gains
2012-02-15 09:10:15 -08:00
efce991bfb
upped max target speed to center of loiter
2012-02-10 22:46:27 -08:00
c35ad2d493
Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune.
2012-02-09 22:22:00 -08:00
8aaf88e13b
tweaks to Loiter
2012-01-30 21:13:03 -08:00
23709bafef
pid_nav_lat incorrectly labeled
2012-01-29 23:02:00 -08:00
ae65a0f03f
removed filter. Don't need it.
2012-01-29 17:10:52 -08:00
7833cea9d4
2.2B6 - Please verify Heli still functions properly.
...
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
25529dec69
added loiter_d to allow users to configure alternate Loiter alg
2012-01-22 14:19:27 -08:00
74daadb252
Revert "test to switch loiter controls"
...
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
2012-01-22 14:19:27 -08:00
6476ba22f2
test to switch loiter controls
2012-01-22 12:28:34 -08:00
fffa1af3b3
Fixed speed governor which was letting speed get to 0.
...
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
2012-01-21 22:12:57 -08:00
8cb645f3c2
increasing the velocity near WP
2012-01-21 11:59:49 -08:00
6784989e83
relocated reset_I term functions to central location
2012-01-20 22:52:30 -08:00
6591089110
Disabled Ryans filter until we get real-world testing in.
2012-01-13 12:48:02 -08:00
569ff5046f
Added Ryan's GPS lag filter
...
Removed unused code
refined alt change
2012-01-12 22:28:58 -08:00
99ea69ef7b
New Loiter control
2012-01-11 22:41:51 -08:00
3e8ff39d4b
Climb rate control
2012-01-10 23:43:44 -08:00
63be9c5f7b
Moved wind comp into a define
2012-01-07 22:27:26 -08:00
c9f60f239d
Added Note
2012-01-06 10:20:59 -08:00
2913948520
ACM: fixed a warning
...
comment out some unused debug code
2012-01-05 10:14:53 +11:00
e36d2f6e96
Added Wind compensation for Stabilize
...
moved speed calc to it's own function
decreased acceleration from WPs
2012-01-04 09:28:37 -08:00
26d0bf93ff
Added more constraints around velocity
2011-12-31 10:59:59 -08:00
c6586810cf
New Style WP navigation for high wind
2011-12-30 23:48:05 -08:00
95a70cf32e
lowered to nav_lat and nav_lon int16
...
added a version that didn't have I term added to get a better indication of velocity estimation
2011-12-29 23:02:03 -08:00
rmackay9
Robert Lefebvre
Andrew Tridgell
Jason Short
uncrustify
Adam M Rivera