Commit Graph

62 Commits

Author SHA1 Message Date
jasonshort 96d6c01bdc hack to fix Motor lights when arming after init.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3100 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:54:29 +00:00
jasonshort a25b0afb67 removed throttle_slew - Just wasn't working well enough and added too much complexity
moved reading sonar to the 50hz loop so the Mode filter could do it's thing without causing so much latency

git-svn-id: https://arducopter.googlecode.com/svn/trunk@3094 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 02:30:37 +00:00
tridge60@gmail.com b062e8e6f8 fixed PSTR() on motor arm messages
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3004 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:34:27 +00:00
tridge60@gmail.com 4dc9de81a3 re-added ARMING messages in HIL mode
this is useful as in HIL mode you don't always have blinking lights

git-svn-id: https://arducopter.googlecode.com/svn/trunk@3003 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:25:58 +00:00
tridge60@gmail.com 022314ed4c process MAVLInk packets during gps detection and IMU calibration
this allows the GCS to connect immediately on startup

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2994 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 08:08:52 +00:00
jasonshort 82e51aec82 Big update 2.0.38
moved ground start to first arming
added ground start flag
moved throttle_integrator to 50hz loop
CAMERA_STABILIZER deprecated - now always on
renamed current logging bit mask to match APM
added MA filter to PID - D term
Adjusted PIDs based on continued testing and new PID filter
added MASK_LOG_SET_DEFAULTS to match APM
moved some stuff out of ground start into system start where it belonged
Added slower Yaw gains for DCM when the copter is in the air
changed camera output to be none scaled PWM
fixed bug where ground_temperature was unfiltered
shortened Baro startup time
fixed issue with Nav_WP integrator not being reset
RTL no longer yaws towards home
Circle mode for flying a 10m circle around the point where it was engaged. - Not tested at all! Consider Circle mode as alpha.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2966 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:42:54 +00:00
tridge60@gmail.com 7b83bbf47b make a lot more functions and variables static
this saves about 1k of code space through better compiler optimisation

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2889 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 10:32:00 +00:00
jasonshort ed5c7d01b1 New PIDs - I rewrote the control laws from scratch to add a PI Rate function. The end result should fly nearly identically to the current version. The nice detail is that we can use NG PID values for easy transition!
Before: ->  After
Stabilize P –> Stabilize P (Use NG values, or 8.3 x the older AC2 value)
Stabilize I –> Stabilize I (Stays same value)
Stabilize D –> Rate P (Stays same value)
–> Rate I (new)
 
Added a new value – an I term for rate. The old stabilization routines did not use this term. Please refer to the config.h file to read more about the new PIDs.
Added framework for using DCM corrected Accelerometer rates. Code is commented out for now.
Added set home at Arming.
Crosstrack is now a full PID loop, rather than just a P gain for more control. 
Throttle now slews when switching out of Alt hold or Auto modes for less jarring transitions
Sonar and Baro PIDs are now combined into a throttle PID Yaw control is completely re-written.
Added Octa_Quad support - Max



git-svn-id: https://arducopter.googlecode.com/svn/trunk@2836 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-11 00:47:08 +00:00
jasonshort 1e8572f7c6 2.0.26
minor updates, 
Arming motors now for only Stabilize, Simple, and Acro Modes.
V Octo Support


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2657 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:37:54 +00:00
jasonshort 39b08decf3 AC2.0.24b
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2567 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:03:26 +00:00
jasonshort c67601dacb 2.0.18
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2433 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-29 04:02:01 +00:00
jasonshort 995d5325d1 Moved motors to individual files.
updated motor setup test to be sequencial pulses of the motors in CW order.
Fixed Mission scripting logic
fixed Free yaw error in neutral throttle
fixed D term issue with Baro hold - was too high
incremented firmware revision, removed frame var
removed setup show from startup
removed unused EEPROM functions
fixed broken demo mission
fixed non working loiter with delay



git-svn-id: https://arducopter.googlecode.com/svn/trunk@2275 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-15 02:02:09 +00:00
jasonshort 4a7b4ac3b4 moved rudder servo control out of 200hz loop to test if it will reduce servo noise.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2260 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-14 04:45:28 +00:00
jasonshort 12357746a9 better Baro hold - Baro_KD was way too high.
Clean up with WP processing
moved crosstrack call to more logical location

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2259 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-14 04:30:42 +00:00
jasonshort b566b1e55b HEXAP_FRAME output
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2247 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-12 15:58:27 +00:00
jasonshort f0924a9f1b HEXA_P frame support
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2243 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-11 06:14:15 +00:00
jasonshort b0d7ec3747 changes for Max and tri-copters
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2184 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-07 20:26:43 +00:00
jasonshort 7e843ee679 Warning!!! The recent build 1919 was tagged as sparkfun.
The trunk is unstable, so please be careful. I've made a lot of changes based on the Sparkfun challange. Most include how we handle things like altitude, but the mission scripting has also been updated as well.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@1920 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-25 05:12:59 +00:00
jasonshort f652c5ae91 Added float for CH6_Y6_SCALING value.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1903 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 23:12:27 +00:00
jasonshort 0063c8e60d Added rudimentary tuning with CH6. Assign this to your Flaps knob on your radio. in APM_config.h set your desired option, then upload. The knob will adjust the value in real time. Enter the CLI and run test, tune to see the output value.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1902 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 23:08:16 +00:00
jasonshort 87812c9eec Reworking Yaw some more. Yaw is testing really well with this version.
I have moved Pitch_Max to a different part of the code. It was limiting SIMPLE mode which was bad. Now it only limits in Auto modes, RTL, LOITER, etc.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@1899 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-17 05:17:42 +00:00
mich146@hotmail.com dc615e6320 Logging fix's
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1888 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-16 07:36:22 +00:00
jasonshort d3983f12c3 Yaw offset for simple mode now recorded when Arming motors each time.
Yaw behavior has been re-worked and seems to be fixed now. Works fine in my shop.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1882 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-15 16:45:47 +00:00
jasonshort f6783454d7 Removed all calls to legacy trim_radio(). Handled by radio setup.
Added AP_Var Fingerprint checker. Will not let users fly with OOD firmware.
Tweaked Yaw to give better response. Let me know how it goes. It looks fine, but I've not flown it.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@1878 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-14 05:56:39 +00:00
jasonshort 21980216b9 Altitude control fix - trying to go higher would make alt hold reset to 0
Yaw fix, 
improved PID defaults
potential logging fix


git-svn-id: https://arducopter.googlecode.com/svn/trunk@1877 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-13 16:33:06 +00:00
jphelirc 41e4b0a471 preparing for hexa-x and hexa-+ frames, code updates
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1875 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-12 01:58:46 +00:00
jasonshort 860adeb812 added a limit to throttle_input = 800 for stability insurance
found an odd bug in SIMPLE mode that broke LOITER mode. Fixed



git-svn-id: https://arducopter.googlecode.com/svn/trunk@1871 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-10 23:07:24 +00:00
levinemax@gmail.com b84137ae42 Y6 frame, motors changed to All TOP CCW / BOTTOM CW
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1833 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-01 14:45:35 +00:00
jasonshort 5a841e41c0 Yaw fix for Max Y6
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1810 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-24 01:36:52 +00:00
tridge60@gmail.com 53549f14a6 undid accidentical commit of local changes
sorry about that!

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1806 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:35:54 +00:00
tridge60@gmail.com 9e8ef19150 allow configuration of motor arming condition
This allows the user to configure their own motor arming condition in
APM_Config.h. For example, the user could set it up for MODE1
transmitters, by using:

 #define MOTOR_ARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in > 2700)
 #define MOTOR_DISARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in < -2700)

You could also set it up to use the "throttle cut" switch on a
transmitter, by mapping that to a spare channel.

The default (throttle minimum and maximum/minimum yaw) is the same as
it was before

This patch also adds reporting of motor arming to the GCS, which can
be useful for testing.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1802 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:38 +00:00
jasonshort b1ffabc9a3 Added Y6 support
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1792 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 19:21:43 +00:00
tridge60@gmail.com d09800f6f9 disabled tabs in emacs formatting markers
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1790 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:20:11 +00:00
jasonshort 984e6c7928 removed debug code
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1775 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-15 05:55:51 +00:00
jasonshort 323f2bfa59 Update to get SIMPLE mode running.
Seems to work!

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1774 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-15 05:54:48 +00:00
jasonshort 732446eb3a fix for Logging, motors_out buffer overrun, formatting.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1769 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 21:37:37 +00:00
jasonshort 97107d89d2 bug fixes and updates
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1750 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 00:57:06 +00:00
tridge60@gmail.com a05c374de1 HIL: fill motor_out[] when disarmed, so HIL sees zero values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1747 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:35:50 +00:00
tridge60@gmail.com b1e54558e4 mavlink: fixed build with MAVLink and HIL
this fixes the build with HIL_MODE_ATTITUDE and MAVLink enabled. Basic
MAVLink operation works.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1737 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 11:39:52 +00:00
jasonshort b59474fc1a Big changes in the way commands are parsed and mission tasks are done. Not tested at all.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-03 02:32:50 +00:00
jasonshort e51be3328b Should be flyable now. Please Use Reset in setup before flying.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1726 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-25 05:33:39 +00:00
jasonshort 2555abcf1d git-svn-id: https://arducopter.googlecode.com/svn/trunk@1719 f9c3cf11-9bcb-44bc-f272-b75c42450872 2011-02-24 05:56:59 +00:00
jasonshort cb62a3f262 git-svn-id: https://arducopter.googlecode.com/svn/trunk@1715 f9c3cf11-9bcb-44bc-f272-b75c42450872 2011-02-23 05:12:41 +00:00
jasonshort 6a34bef020 in progress updates, don't fly
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1710 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 20:58:10 +00:00
jasonshort 5282c72d1f continued APvar int
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1703 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 04:30:56 +00:00
jasonshort 73f3fc6193 continued APvar int
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1701 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-20 23:09:28 +00:00
jasonshort acb7d78a79 updated to AP_Var
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1680 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-19 03:59:58 +00:00
DrZiplok facda81c5a Compilation fixes per request
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1671 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-17 09:36:33 +00:00
jasonshort dedb1e29ce updated Param gen - won't compile yet.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1669 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-17 07:27:57 +00:00
jasonshort 149de91eb7 updated Param gen - won't compile yet.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1668 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-17 07:25:31 +00:00