uncrustify
e4932136d9
uncrustify ArduCopter/ArduCopter.pde
2012-08-21 19:19:50 -07:00
Andrew Tridgell
bd6581c523
AHRS: removed Quaternion build support from APM/ACM/rover
2012-08-22 10:42:21 +10:00
Andrew Tridgell
85e8ba7993
ACM: fixed TradHeli build
2012-08-22 09:55:31 +10:00
Robert Lefebvre
e1d6103045
TradHeli: Creating Flybar Acro mode.
2012-08-21 16:54:01 -04:00
rmackay9
1dd8606b17
ArduCopter: changed reset_throttle_counter to uint8_t to get rid of overflow bug that was preventing target altitude from being locked in after pilot input down throttle.
2012-08-19 11:50:35 +09:00
Jason Short
123545f679
ACM : Alt hold adjustment - made angle boost work during alt hold changes.
...
increased length of delay when reverting to automatic hold to deal with latency of baro sensor
2012-08-18 09:30:46 -07:00
rmackay9
7a31e4e660
ArduCopter: modified altitude hold so that 1 second slow down period is executed after pilot moves throttle back into deadzone
2012-08-18 21:45:49 +09:00
Jason Short
cbf4870b00
ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP
2012-08-16 15:39:50 -07:00
rmackay9
48b7d26c5d
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Jason Short
cbd4661b96
ACM: Added a filtered version of Location for GPS lag.
...
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
2012-08-14 14:11:51 -07:00
Jason Short
ba6ec9ae45
ACM: Revved the version
2012-08-14 14:11:51 -07:00
Jason Short
455cfa4caa
ACM: Toy mode updates - added second toy mode
2012-08-11 22:37:27 -07:00
Andrew Tridgell
d0709443b4
AHRS: fixed build
...
AP_Airspeed.h is now needed to build AHRS
2012-08-11 12:22:55 +10:00
Jason Short
0688eee9bc
ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second.
2012-08-10 10:02:32 -07:00
Jason Short
7615c835ee
ACM : Arducopter.pde
...
command_nav_index upped to in16t for negative number
renamed trim flag > CH7_flag
Added fast_corner var
removed unused alt vars
Alt hold I term update
2012-08-09 16:59:43 -07:00
Amilcar Lucas
1683f18bff
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
Amilcar Lucas
f321f5d9c5
Add a second mount instance
2012-08-08 23:07:25 +02:00
Andrew Tridgell
295a9ce39c
ACM: change to use get_bearing_cd() instead of get_bearing()
2012-08-08 12:12:30 +10:00
Andrew Tridgell
d8106cf20f
AP_Param: update ArduCopter core for new AP_Param interface
2012-08-08 12:11:57 +10:00
Amilcar Lucas
ff32fed176
ArduCopter: Use generic channel names for AP_Mount servos.
...
This simplifies mission planner, the same code can be used for plane and copter now.
2012-08-06 23:33:51 +02:00
Amilcar Lucas
03b902d4b7
Add me :)
2012-08-06 00:40:12 +02:00
Amilcar Lucas
36bcd827b4
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
Amilcar Lucas
fe4713b46e
RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls.
2012-08-05 23:08:31 +02:00
Amilcar Lucas
9b31938519
The mount type must be updated periodically
2012-08-04 18:44:08 +02:00
rmackay9
64f027bf42
ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode.
2012-08-01 12:15:02 +09:00
Andreas M. Antonopoulos
005b3d7f62
AC2.7.1: Updated version and tag
2012-07-31 13:11:17 -07:00
rmackay9
38ff381620
ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered)
2012-07-28 23:05:05 +09:00
rmackay9
07a8d0cc99
ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing)
2012-07-28 16:22:35 +09:00
rmackay9
83ab9be0eb
ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP
2012-07-28 14:21:07 +09:00
Michael Oborne
78b94f39ae
AC fix sitl attitude hil build
2012-07-24 21:18:36 +08:00
Andreas M. Antonopoulos
f8a9cdd8cd
AC: ArduCopter 2.7 release candidate - updated THISFIRMWARE constant.
2012-07-21 17:52:06 -07:00
Jason Short
9cf36c553c
ACM: Fixed Baro rate patch to work with Sonar and added simple filter
2012-07-21 16:45:00 -07:00
Jason Short
e585eaa253
Ardcucopter: RTL distance check update, reset I terms fixed.
2012-07-20 13:27:35 -07:00
Jason Short
c1186abf65
Arducopter: cleanup, skip out of throttle control when flipping.
2012-07-19 22:35:21 -07:00
Jason Short
8f7eba4fd1
Arducopter.pde: Increased the throttle Hold altitude control
...
simplified Yaw reset
2012-07-19 17:38:25 -07:00
Jason Short
bc843b0684
Arducopter: Adjust landing speed
...
removed commented out calc_loiter_pitch_roll calls
Changed updateRTL to use 1m be default instead of wp_radius to avoid poor loiter entry speed.
2012-07-19 09:48:31 -07:00
Jason Short
1595a662c0
Arducopter
...
removed old Var
2012-07-18 22:57:10 -07:00
Jason Short
f40d8f04af
Arducopter: New Alt control code
...
Uses a new method to manage altitude changes. Alt hold controller was split into a hold and a rate controller just like navigation. Changing alt is done by specifying a climb rate.
Interactive alt hold is now simplified and is an 80cm climb or descent.
2012-07-18 22:57:10 -07:00
Jason Short
095a9c5c96
Arducopter: Flip mode
...
Flip mode graduates to pre-compiled option
2012-07-18 22:57:10 -07:00
rmackay9
6ca8fda76d
ArduCopter.pde: added call to set_manual_rc_channel to allow pilot's channel 6 to control pitch.
...
This initialisation code should be moved to init_ardupilot and/or into the AP_Mount library.
2012-07-18 23:49:09 +09:00
Andreas M. Antonopoulos
b03e424fda
AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling.
2012-07-16 11:46:43 -07:00
rmackay9
9276c68f80
ArduCopter: added enable_out_ch and output_ch calls for rc_camera_roll, pitch and yaw servos so they actually move
2012-07-15 16:38:28 +09:00
Andreas M. Antonopoulos
31fd74d94c
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Jason Short
3ce48cb42c
Arducopter: Yaw stop fix
2012-07-14 12:23:10 -07:00
Robert Lefebvre
ef9cd54035
Implementing Yaw Fix. Tried to blend with Jason's changes.
2012-07-14 00:24:22 -04:00
Jason Short
9eb638dac8
Circle_WP: Fix for Yaw toward center, fix for transit to Circle WP from a distance
2012-07-13 19:29:36 -07:00
Jason Short
ce0de98144
Arducopter: Wrong define used, caused Copter to Yaw to home when flying missions
2012-07-13 12:51:38 -07:00
Jason Short
bfce0ad9c5
Arducopter: Fix circle_WP
2012-07-12 09:22:20 -07:00
Jason Short
1bd1975e2e
Arducopter:Arducopter.pde
...
switched over to barometer.get_climb_rate() * 100
removed +home.alt calcs since home is always 0 altitude
2012-07-10 21:53:38 -07:00
Jason Short
9de2c00d93
Arducopter: WP_radius
...
Switching to stored WP_radius in meters, just like Arduplane
2012-07-10 21:53:38 -07:00
Amilcar Lucas
8e14ebbc10
Merge the changes from APM_Camera branch into ArduCopter
...
Conflicts:
ArduCopter/Camera.pde
ArduCopter/Parameters.pde
2012-07-11 00:39:13 +02:00
Jason Short
86cab799ed
arducopter.pde
...
Timer was set =0 at initialization.
2012-07-09 13:13:32 -07:00
Jason Short
207497a840
Arducopter.pde:
...
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
2012-07-03 17:21:46 -07:00
Jason Short
0aabd4efe2
Yaw mode:
...
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
2012-07-01 13:40:12 -07:00
Jason Short
e5fbcb629d
Arducopter.pde_RTL:
...
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
2012-07-01 13:40:11 -07:00
Jason Short
b199fb22a2
Added code for self centering throttle - disabled by default.
2012-07-01 13:40:11 -07:00
Jason Short
60cdbe771c
Circle_WP distance check fix
2012-06-29 21:20:28 -07:00
Jason Short
146a4b021f
Arducopter.pde: Added Toy mode refinements
2012-06-29 21:20:27 -07:00
Jason Short
c830ab6ded
Aeducopter.pde: Toy mode updates
2012-06-29 21:20:27 -07:00
Andrew Tridgell
1cb96e14a9
SITL: enable the SIM_* parameters in ArduCopter and ArduPlane
2012-06-29 15:10:52 +10:00
Adam M Rivera
44ce8fc4bc
ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work.
2012-06-28 20:34:53 -05:00
Andrew Tridgell
7883c4a545
ACM: ArduCopter updates for new compass interface
2012-06-27 16:01:50 +10:00
Andrew Tridgell
7eb150a2f0
ACM: adapt the ArduCopter code for new barometer interface
2012-06-27 16:01:50 +10:00
Andrew Tridgell
d71e82191f
ACM: enable GPS in AHRS for ArduCopter
...
this is an experiment in centripetal correction for multicopters
2012-06-27 16:01:49 +10:00
Jason Short
3fcd3100cc
Added user editable define for Super simple radius
2012-06-26 10:38:46 -07:00
Jason Short
4872880134
Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with.
...
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
2012-06-25 23:08:25 -07:00
Jason Short
8ef60f2d75
Added throttle_min as a user definable param
2012-06-20 14:58:34 -07:00
rmackay9
6b16ca190f
ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release
2012-06-15 00:42:59 +09:00
Jason Short
6dc1e02f76
Inertial Control
...
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.
This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.
Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.
The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
rmackay9
c9093a1609
ArduCopter: updated firmware version to 2.6 Epsilon
2012-06-12 23:22:57 +09:00
Jason Short
ebff84d41e
Added Angel's name to contrib list
2012-06-10 12:38:22 -07:00
rmackay9
df72f70aba
ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release)
2012-06-08 21:54:09 +09:00
rmackay9
cad76d4e0f
ArduCopter: updated firmware description to 2.6 Gamma
2012-06-05 21:28:13 +09:00
Jason Short
60c89ee117
Updates to Flip:
...
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
2012-06-03 22:15:19 -07:00
rmackay9
826cffe688
ArduCopter: Ensure update_GPS does nothing when gps is disabled.
...
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
2012-06-03 23:48:45 +09:00
rmackay9
68de4e0259
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 17:02:35 +09:00
rmackay9
09695602d2
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 16:59:23 +09:00
Robert Lefebvre
bafb478924
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
Jason Short
abb426aec3
When RTLing, force home as the final location for loiter.
2012-05-30 11:06:41 -07:00
Jason Short
c45209eaff
Broken timer - removed
2012-05-29 12:56:38 -07:00
Jason Short
33d1b5a137
Speed up automatic disarming to 25 seconds for safety.
...
renamed AUTO_ARMING_DELAY to AUTO_DISARMING_DELAY
2012-05-29 12:41:35 -07:00
Jason Short
3ba6e1db7a
Removed references to a takeoff timer
2012-05-29 11:28:40 -07:00
Jason Short
394f8c6eb0
pulling throttle low in flight turns out to be more common than thought. Removed clearing of takeoff_complete flag. This is still cleared during disarm which is automatic after 30 seconds of no throttle.
2012-05-29 11:25:04 -07:00
Jason Short
a3a90287f4
changed the way takeoff complete is figured. Looking for high throttle.
2012-05-29 11:25:04 -07:00
Jason Short
4ed48510dc
reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station.
2012-05-27 09:21:20 -07:00
Jason Short
e2086decc6
Arducopter.pde : setting rtl_approach_alt above 1 would force auto landing even if auto-landing was disabled.
2012-05-23 22:00:56 -07:00
Robert Lefebvre
df4246597f
Updates to CopterLEDS
...
Creation of Nav Blink Function.
2012-05-22 09:58:37 -04:00
Jason Short
99dee97385
Added note
2012-05-21 09:58:23 -07:00
Jason Short
f8ceec2b4b
added check for duplicate time-stamped GPS messages.
2012-05-18 09:54:18 -07:00
Jason Short
be71cbfcc8
Arducopter.pde :
...
removed unneeded d_rate_filters
updated Nav routine to handle faster GPS updates
moved calc_XY_velocity to GPS read
added check for duplicate GPS reads
2012-05-17 11:05:05 -07:00
Jason Short
7278e8d1e5
removed retro loiter code since Angel has a branch now.
...
shrank speed filter to avoid latency
removed unused forward estimator code
placed code for switchover to gps.groundspeed at 1.5m/s
added clamp for D term when below .5m/s to eliminate noise
added hybrid I-term based on speed error and position
changes Loiter D term to use position rather than acceleration to avoid noise
2012-05-15 22:14:23 -07:00
rmackay9
eaeaa3811a
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
rmackay9
47ea92aa7f
ArduCopter: updated version to 2.5.5
2012-05-13 08:47:43 +09:00
Andrew Tridgell
7866740d62
MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI
2012-04-24 22:24:58 +10:00
Adam M Rivera
2ee8237b5f
ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define.
2012-04-23 00:19:18 -05:00
Adam M Rivera
692bbee233
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-23 00:03:37 -05:00
Jason Short
2aca6c64ab
Added a union for casting floats to ints and back when storing Floats to the DataFlash
2012-04-21 15:17:09 -07:00
rmackay9
114e6a3551
ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion
2012-04-21 23:24:57 +09:00
rmackay9
53ddb58c7b
ArduCopter - changed optflow object to be APM2 version if necessary
2012-04-21 20:15:55 +09:00
Adam M Rivera
edf15c1b9b
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-20 11:45:38 -05:00