Commit Graph

167 Commits

Author SHA1 Message Date
priseborough 4d958952f6 AP_NavEKF3: use standard unit descriptor for milliseconds 2017-01-27 16:57:42 +09:00
priseborough 7e8f3fca53 AP_NavEKF3: Address review comments
Removes a leftover debug printf statement.
Fixes documentation errors.
Replace remaining fmaxf function calls with Ardupilot MAX function
2017-01-27 16:57:42 +09:00
priseborough 59ee074560 AP_NavEKF3: Remove EKF2 names 2017-01-27 16:57:42 +09:00
priseborough b862f0d7ad AP_NavEKF3: Enable use of GPS delay value from returned by the driver
Use the time delay returned by the GPS driver.
Wait long enough for the GPS configuration to be determined, but time out after 30 seconds and warn the user that a default value for time delay will be used.
2017-01-27 16:57:42 +09:00
priseborough 8d1733cee6 AP_NavEKF3: Use FIR filtered airspeed
Switch to use of an airspeed reading averaged across the raw sensor readings. since the last update.
This avoids use of the IIR which requires a larger time delay compensation and violates the assumption of uncorrelated noise.
The time delay parameter has been reduced to compensate for the removal of the airspeed IIR filtering.
2017-01-27 16:57:42 +09:00
priseborough 9261c34097 AP_NavEKF3: Update default GPS delay
This value is a compromise between what works best for a Ublox 6 which is around 200msec delay and the more recent 7 and 8 series receivers that are around 120msec delay.
2017-01-27 16:57:42 +09:00
priseborough ed5039823f AP_NavEKF3: Adapt sensor buffer lengths
Adapt the lengths of the IMU and observations buffers on startup to the specified time delays and update rates.
This does require the EKF to be re-started if time delays are changed.
2017-01-27 16:57:42 +09:00
priseborough 92b8c33b19 AP_NavEKF3: publish 3-state range beacon estimator states 2017-01-27 16:57:42 +09:00
priseborough e5e4883c72 AP_NavEKF3: Fix GPS use inhibit interface documentation 2017-01-27 16:57:42 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas cae557fb4c AP_NavEKF3: Correct display names, bitmask and units 2017-01-16 19:07:26 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas 195e32c2fc AP_NavEKF3: fix some parameter descriptions 2017-01-09 13:30:24 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas d408d25f92 More spelling stuff 2017-01-06 10:57:39 -08:00
priseborough f1c05ee320 AP_NavEKF3: Allow accel switch on bias uncertainty to be adjusted 2016-12-19 08:07:15 +11:00
priseborough 7d4a50f483 AP_NavEKF3: Prevent unwanted core switch on startup
Require primary core to be healthy for 10 seconds before starting selection logic
2016-12-19 08:07:14 +11:00
priseborough cd6fd0ea45 AP_NavEKF3: Improvements to range finder selection logic
Enables the horizontal speed at which we switch from range finder to alternate to be adjusted.
Does not switch from range finder to alternate based on speed when speed estimate is invalid.
2016-12-19 08:07:14 +11:00
priseborough 7202acc1b5 AP_NavEKF3: Default EKF3 to off
Will revert this and set EKF2 to off by default after testing is completed on all platform types
2016-12-19 08:07:09 +11:00
priseborough 39969e7d8e AP_NavEKF3: added EKF3 for EKF experimentation
AP_NavEKF3: Implement same maths as PX4/ecl EKF

Replace attitude vector states with quaternions
Remove gyro scale factor states
Add XY accel delta velocity bias estimation
Initial tuning
Add GPS body frame offset compensation

AP_NavEKF3: Fix bugs and consolidate aiding switch logic

Switching in and out of aiding modes was being performed in more than one place and was using two variables.
The reversion out of GPS mode due to prolonged loss of GPS was not working.
This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function.

AP_NavEKF3: prevent multiple fusion mode changes per filter update

AP_NavEKF3: Update tuning defaults

AP_NavEKF3: Fix bug causing switching in and out of aiding
If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding.
This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed.
An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS.

AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers
This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset.

AP_NavEKF3: Improve switch-over to backup magnetometer
When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected.

AP_NavEKF3: enable automatic use of range finder height

AP_NavEKF3: Fix bug in handling of invalid range data

AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3:

AP_NavEKF3: Handle yaw jumps due to core switches

AP_NavEKF3: Enable simultaneous GPS and optical flow use

AP_NavEKF3: fix console status reporting

AP_NavEKF3: send messages to mavlink instead of console

This allows the GCS to better handle the display of messages to the user.

AP_NavEKF3: replace deprecated function call

AP_NavEKF3: Compensate for sensor body frame offsets

AP_NavEKF3: Fix bug in median filter code

AP_NavEKF3: save some memory in the position offsets in EKF3

We don't need to copy that vector3f for every sample. A uint8_t does the job

AP_NavEKF3: Add fusion of range beacon data

AP_NavEKF3: Bring up to date with EKF2

AP_NavEKF3: Misc range beacon updates

AP_NavEKF3: Add mising accessors

AP_NavEKF3: remove duplicate include

AP_NavEKF3: Prevent NaN's when accessing range beacon debug data

AP_NavEKF3: Update range beacon naming

AP_NavEKF3: updates

AP_NavEKF3: miscellaneous changes

AP_NavEKF3: misc updates

AP_NavEKF3: misc range beacons updates

AP_NavEKF3: add missing rover default param
2016-12-19 08:06:47 +11:00