Siddharth Purohit
a7d641c705
AP_HAL_ChibiOS: add available method for locked state
2020-08-19 17:31:09 +10:00
Peter Barker
931c77fa77
AP_HAL_ChibiOS: correct clearing of UART drivers
2020-06-03 17:00:44 +10:00
Peter Barker
6d9e563ede
AP_HAL_ChibiOS: override read(buffer,count) method to be more efficient
2020-05-26 15:59:11 +10:00
Peter Barker
8f54de4184
AP_HAL_ChibiOS: add discard_input method on UARTDriver
2020-05-26 09:20:32 +10:00
Andrew Tridgell
db8fdeebeb
HAL_ChibiOS: fixed Hott telem half duplex handling
...
this fixes an issue with single byte writes with half duplex. It isn't
an elegent solution, but nicely separates the different types of half
duplex operation
2020-04-17 17:52:28 +10:00
Andrew Tridgell
fc0b2ef920
HAL_ChibiOS: added half-duplex protection for non-inverted
...
to prevent output bytes being seen as input bytes we disable half
duplex during transmit. This was previously only done for non-inverted
UARTs. This patch enables it whether we are inverted or not. This
greatly reduces the number of bad input bytes.
2020-03-20 12:37:52 +11:00
Andrew Tridgell
8b93e0f57d
HAL_ChibiOS: prevent double init of USB
...
this prevented init of USB CubeBlack on Windows. Thanks to Randy for
reporting
2020-02-12 17:44:09 +11:00
Andrew Tridgell
e8ab35a192
HAL_ChibiOS: fixed stdout in early startup bug
...
this caused a failure to boot on some boards if they tried to print
messages in early startup code before hal was initialised
thanks to @Shadowru for reporting the issue
2020-02-12 13:51:10 +11:00
Andrew Tridgell
a8501a91c7
HAL_ChibiOS: fixed handling of write mutex
...
this fixes an issue with log download on USB and mavlink throughput
caused lock contention. The issue was introduced with the changes for
unbuffered writes recently (does not affect stable releases)
2020-01-21 08:37:25 +11:00
Andrew Tridgell
a935b764f4
HAL_ChibiOS: fixed UART DMA issue on F4
...
disabling in rx irq callback should only be done on F3
2020-01-18 07:13:11 +11:00
Andrew Tridgell
9554103418
HAL_ChibiOS: don't extend alloc of iomcu uart
2020-01-18 07:13:11 +11:00
Andrew Tridgell
a7b83b1e26
HAL_ChibiOS: allow for unbuffered writes without DMA
2020-01-16 20:36:54 +11:00
Andrew Tridgell
bb5c1d07e1
HAL_ChibiOS: implement new UART option bits
2020-01-03 17:32:23 +11:00
Andrew Tridgell
b1ca7380be
HAL_ChibiOS: re-implement half-duplex using HDSEL switching
...
this makes half-duplex more reliable on UARTs with pullups or level
shifters
2020-01-02 09:52:57 +11:00
Andrew Tridgell
faf34970e1
HAL_ChibiOS: automatically control pullup/pulldown on inverted UARTs
...
this makes setup of sport telemetry much easier
2020-01-02 09:52:57 +11:00
Andrew Tridgell
4b4642dd4d
HAL_ChibiOS: allow handling of much higher receiver baudrates with DMA
...
this uses two DMA RX bouncebuffers to minimise the time with DMA
disabled so that we can handle much higher baudrates
2019-12-26 10:42:48 +11:00
Andrew Tridgell
58292821b3
HAL_ChibiOS: fix DMA on UARTs for F303
2019-12-26 10:42:48 +11:00
Andrew Tridgell
ccd1ce406c
HAL_ChibiOS: scale uart rx buffer size with baudrate
...
this ensures we have enough buffer space for a RTK GPS, as well as for
high speed comms with a companion computer
2019-12-23 09:54:36 +11:00
Andrew Tridgell
bc1de7a208
HAL_ChibiOS: support STM32F3xx MCUs
2019-11-01 10:53:53 +11:00
Mirko Denecke
b84dcd483d
AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces
2019-10-21 08:01:56 +11:00
Andrew Tridgell
bf2cf7834d
HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
...
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell
d1565a96c5
HAL_ChibiOS: wrap cacheBuffer functions
...
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell
16bdaaa1af
HAL_ChibiOS: added support for STM31F10x for AP_Periph
2019-08-27 10:29:56 +10:00
Andrew Tridgell
8080efbc6a
HAL_ChibiOS: allow for blocking unbuffered uarts
...
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
2019-08-17 17:36:41 +10:00
Andrew Tridgell
afc8a70ce4
HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs
...
wait_timeout() could return true on a read of less bytes than are
expected.
2019-08-17 17:36:41 +10:00
Siddharth Purohit
2f0d1336e6
HAL_ChibiOS: add support for dual usd cdc
2019-07-12 17:01:21 +10:00
Andrew Tridgell
7e1048c89b
HAL_ChibiOS: enable UART inversion on H7
2019-03-01 11:39:27 +11:00
Andrew Tridgell
64681cb05c
HAL_ChibiOS: allocate threads from any heap
...
this fixes a failure on MatekF405-Wing where it fails to allocate the
SPI thread for the IMU
2019-02-27 11:54:28 +11:00
Andrew Tridgell
dad1774330
HAL_ChibiOS: fixed channel selection for F4/F7 uart driver
2019-02-26 16:18:26 +11:00
Andrew Tridgell
9647a68c9e
HAL_ChibiOS: fixed UART RX DMA for H7
2019-02-26 16:18:26 +11:00
Andrew Tridgell
231117e9b1
HAL_ChibiOS: invalidate before read on rx, not on DMA setup
...
more efficient, as we only invalidate what was used
2019-02-26 16:18:26 +11:00
Andrew Tridgell
071d5e01af
HAL_ChibiOS: added DMAMUX channel assignment calls
2019-02-26 16:18:26 +11:00
Andrew Tridgell
f4e31ce65b
HAL_ChibiOS: added more cache flush ops
2019-02-26 16:18:26 +11:00
Andrew Tridgell
dd8115c9b4
HAL_ChibiOS: check for already allocated TX dma in UART driver
2019-02-26 16:18:26 +11:00
Andrew Tridgell
d9c888ab45
HAL_ChibiOS: port SPI, I2C and UART drivers to H7
2019-02-26 16:18:26 +11:00
Andrew Tridgell
bbd25350eb
HAL_ChibiOS: support ChibiOS kernel major 6
...
preparing for STM32H7 support
2019-02-26 16:18:26 +11:00
Siddharth Purohit
b5fbdc9888
HAL_ChibiOS: invoke serial data event signal for non dma ports as well
2019-01-23 15:57:05 +11:00
Andrew Tridgell
8c43db1a00
HAL_ChibiOS: implement half-duplex delay and read locking
2018-12-29 15:58:22 +11:00
Andrew Tridgell
013f1d55e8
HAL_ChibiOS: added support for swapping UART pins
2018-11-20 18:25:35 +11:00
Andrew Tridgell
d84bc9f556
HAL_ChibiOS: fixed STM32F7 RXINV flag
2018-11-16 15:48:21 +11:00
Andrew Tridgell
85243ad522
HAL_ChibiOS: enable support for half-duplex uart config
2018-11-14 19:05:09 +11:00
Andrew Tridgell
acf03980ca
HAL_ChibiOS: added UART inversion options
...
support GPIO pins or STM32F7
2018-11-14 19:05:09 +11:00
Andrew Tridgell
8c962e6f0f
HAL_ChibiOS: use a larger TX buffer on USB
...
this is needed for fast log download on vehicles with 50Hz main loop
2018-08-28 08:50:50 +10:00
Francisco Ferreira
1b46104a98
AP_HAL_ChibiOS: fix warning when STDOUT is defined
...
../../libraries/AP_HAL_ChibiOS/UARTDriver.cpp:118:12: warning: 'int hal_console_vprintf(const char*, va_list)' defined but not used [-Wunused-function]
static int hal_console_vprintf(const char *fmt, va_list arg)
^
2018-08-14 10:17:38 +10:00
Andrew Tridgell
7aba99e229
HAL_ChibiOS: fixes for ChibiOS version update
2018-08-03 13:44:59 +10:00
Siddharth Purohit
395c48933c
HAL_ChibiOS: move tto using updated time conversion API
2018-08-03 13:44:59 +10:00
Andrew Tridgell
44fd85ff29
HAL_ChibiOS: reduce memory used by serial buffers
...
this does not appear to affect log download speed. It saves about 27k
of memory
2018-08-01 13:11:16 +10:00
Andrew Tridgell
83f38d536e
HAL_ChibiOS: fixed flow control auto-detect without DMA
...
this fixes automatic flow control detection when we are not using DMA
for TX
2018-07-13 07:34:30 +10:00
Andrew Tridgell
50f7e55f0b
HAL_ChibiOS: don't clear buffers if no baudrate change
2018-07-12 11:41:31 +10:00
Michael du Breuil
153ee6ca8e
AP_HAL_ChibiOS: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00