Andrew Tridgell
9a6fb19208
AP_BattMonitor: report arming unhealthy if backend unhealthy
...
important for i2c based battery backends
2022-06-24 11:13:16 +10:00
Peter Barker
1f4ebb49b5
AP_Mount: document point-at-home default mode option
2022-06-23 16:37:54 +10:00
Andrew Tridgell
5f8ea596a5
hwdef: changed Pixhawk6C board type to 56
...
production bootloader uses 56
2022-06-23 13:43:38 +10:00
Peter Barker
2d3092407f
AP_HAL_Empty: move implementations of functions to header
...
Makes it much clearer what's implemented and what's dangling
2022-06-23 12:38:41 +10:00
Andrew Tridgell
881d9764d4
hwdef: added Pixhawk6C support
2022-06-23 12:37:24 +10:00
Andrew Tridgell
4d031a0c9e
AP_Compass: HAL_COMPASS_DISABLE_IST8310_INTERNAL_PROBE for Pixhawk6C
2022-06-23 12:37:24 +10:00
Andrew Tridgell
e48f405c08
AP_Compass: removed "AK09916 Wrong id" message
...
we don't need this on every board that doesn't have an I2C AK09916
2022-06-23 12:37:24 +10:00
Andrew Tridgell
b1e3b9414b
hwdef: fixed Pixhawk6X ALT_RAM_MAP check
2022-06-23 12:37:24 +10:00
Peter Barker
f4df4298a0
AP_RangeFinder: make LeddarOne calculations more efficient
2022-06-22 21:15:18 +10:00
Peter Barker
90362a4849
AP_RangeFinder: tighten scope of stack variable definition
2022-06-22 21:15:18 +10:00
Peter Barker
6923f20ce6
AP_RangeFinder: stop persisting detections in LeddarOne driver
...
We don't use these readings except immediately after where we store them - so don't store them persistently.
2022-06-22 21:15:18 +10:00
Andy Piper
1287fc4fff
AC_AttitudeControl: reset throttle mix to used mix when scaling mix down
2022-06-22 16:17:26 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
f7d21b63a7
AP_FETTecOneWire: Fix the recent change of NUM_SERVO_CHANNELS > 24
2022-06-22 11:51:23 +10:00
Randy Mackay
45cd158b1c
AP_Mount: gremsy searches for gimbal while disarmed
2022-06-21 13:37:11 +09:00
Randy Mackay
a47ac7430b
AP_Arming: add mount pre-arm check
2022-06-21 13:37:11 +09:00
Randy Mackay
8ba8c67452
AP_Mount: gremsy implements healthy
2022-06-21 13:37:11 +09:00
Randy Mackay
822ee75e20
AP_Mount: add healthy and pre_arm_checks
...
Co-authored-by: olliw42 <waldmanns@gmx.de>
2022-06-21 13:37:11 +09:00
Randy Mackay
10da8a42bd
AP_Mount: replace JSTICK_SPD with RC_RATE
2022-06-21 13:37:11 +09:00
Isaac A
94064175af
AP_HAL_ChibiOS: Allow KakuteF7 initialization without baro
2022-06-21 10:03:08 +10:00
Iampete1
dc0491a8ff
AP_AHRS_view: add rotate method to move from AHRS to AHRS view referance frames
2022-06-21 10:01:30 +10:00
TunaLobster
0027660f3f
AP_RCMapper: Increase parameter metadata range to match NUM_RC_CHANNELS
2022-06-21 09:57:44 +10:00
Peter Barker
deba0b712b
AP_RangeFinder: correct creation/use of TFMINI_ADDR_DEFAULT
...
Named incorrectly and defined in wrong file...
2022-06-21 09:15:20 +10:00
Peter Barker
05131853d8
AP_UAVCAN: allow rangefinder backends to be individually compiled in
2022-06-21 09:15:20 +10:00
Peter Barker
3a347d32ca
AP_RangeFinder: allow rangefinder backends to be individually compiled in
2022-06-21 09:15:20 +10:00
Peter Barker
ce1bb906b7
AP_HAL_ChibiOS: allow rangefinder backends to be individually compiled in
2022-06-21 09:15:20 +10:00
Peter Barker
4e438464d7
AP_Baro: tidy probing of external i2c baros
2022-06-21 09:09:55 +10:00
Bill Geyer
4bb3b08a4a
AC_AutoTune: fix tradheli bug with load gain set
2022-06-20 13:00:53 +09:00
TunaLobster
afaca4b5f6
AP_RCMapper: Remove APM 2.x reference in parameter description
2022-06-18 08:26:40 +09:00
Andrew Tridgell
2e1af59057
AP_Rangefinder: fixed scaling on PWM driver and enable SCALING parameter
...
this fixes a bug introduced here:
https://github.com/ArduPilot/ardupilot/pull/18829
and allows the scaling of PWM rangefinders to be adjusted
2022-06-17 08:21:44 +10:00
Andrew Tridgell
7e4fb803a2
AC_AttitudeControl: reduced default quadplane VTOL pos XY gains
2022-06-16 21:26:49 +10:00
Shiv Tyagi
c339b1d374
SIM_Precland: add option to set orientation of precland device in sitl
2022-06-16 12:43:55 +10:00
Randy Mackay
1400eba400
AP_Mount: minor include and definition re-order and fixup
2022-06-15 18:08:58 +10:00
Randy Mackay
d24d3c0af8
AP_Mount: add HAL_MOUNT_STORMSERIAL_ENABLED build option
2022-06-15 18:08:58 +10:00
Randy Mackay
59916d0327
AP_Mount: add HAL_MOUNT_STORM32MAVLINK_ENABLED build option
2022-06-15 18:08:58 +10:00
Randy Mackay
4f0ee1276b
AP_Mount: add HAL_MOUNT_SERVO_ENABLED build option
2022-06-15 18:08:58 +10:00
Randy Mackay
e2106e63bf
AP_Mount: add HAL_MOUNT_ALEXMOS_ENABLED build option
2022-06-15 18:08:58 +10:00
Randy Mackay
8f51e28242
AP_RobotisServo: disable with minmimize features and 1mb flash
2022-06-15 18:05:44 +10:00
Randy Mackay
91d33c885e
AP_Volz: disable with minmimize features
2022-06-15 18:05:44 +10:00
Andrew Tridgell
06a9a1521c
AP_GPS: added GPS_DRV_OPTIONS bit for ellipsoid height
2022-06-15 17:30:28 +10:00
Andrew Tridgell
509f03f946
AP_GPS: cleanup driver option access
...
use option_set() to make code clearer
2022-06-15 17:30:28 +10:00
Andrew Tridgell
8f3405d308
hwdef: added Pixhawk6X support
...
a new H753 based board similar to the Pixhawk5X
2022-06-15 17:28:40 +10:00
Andrew Tridgell
9efcad3adf
HAL_ChibiOS: added support for ALT_RAM_MAP on H7
...
for compatibility with the px4 H7 bootloader
2022-06-15 17:28:40 +10:00
Andrew Tridgell
308717d5eb
HAL_ChibiOS: enable ITCM and DTCM on H7 at startup
...
these may have been disabled by the px4 H7 bootloader
2022-06-15 17:28:40 +10:00
Andy Piper
25785e12d9
AP_RCTelemetry: don't spam mode changes on CRSF startup
...
rewrite device ping bootstrap to avoid ping flood
enable device pings on CRSF in the event of TX loss.
only send pings if not negotiating the version
2022-06-15 17:20:36 +10:00
Andy Piper
9b8ea8475d
AP_RCProtocol: reset UART on RX failure for CRSF
...
update CRSF timestamps to use microseconds
implement RX liveness protocol and implement for CRSF
2022-06-15 17:20:36 +10:00
Andy Piper
ed6f7fb9e9
AP_HAL_ChibiOS: add support for MambaF405 2022 MK4
...
mark DMA on MambaF405US-I2C UARTs
correct RSSI pin on MambaF405US-I2C
2022-06-15 17:05:41 +10:00
Randy Mackay
34f327404a
AP_Mount: Gremsy only enabled on >1MB boards
2022-06-15 09:07:14 +09:00
Randy Mackay
1fca72a831
GCS_MAVLink: add comment re sending locations to mounts
2022-06-15 09:07:14 +09:00
Randy Mackay
e595da41e6
AP_Mount: gremsy uses gimb-dev-att-send to retract gimbal
...
this replaces the MAV_CMD_USER_1 method
2022-06-15 09:07:14 +09:00
Randy Mackay
14c81099db
AP_Mount: add Gremsy driver
...
Co-authored-by: bugobliterator <siddharthbharatpurohit@gmail.com>
this drivers special features include
sends ATTITUDE and AUTOPILOT_STATE_FOR_GIMBAL
support of RC rate targets
captures and re-forwards gimbal_device_attitude_status
2022-06-15 09:07:14 +09:00