Commit Graph

283 Commits

Author SHA1 Message Date
Randy Mackay e081b9d1c7 Copter: home is set becomes three state 2015-02-12 15:00:50 +09:00
Randy Mackay 34503de18e Copter: integrate SerialManager
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:14 +11:00
Robert Lefebvre 4b86a4aeec Arducopter: Change mode logging to use common-vehicle DataFlash library. 2015-01-21 14:37:20 +09:00
Robert Lefebvre 422970a1b1 Arducopter: Change compass logging to use common-vehicle DataFlash library. 2015-01-21 14:37:16 +09:00
Robert Lefebvre 1b152cf2bf ArduCopter: Change Current logging to use common-vehicle logging in DataFlash library. 2015-01-21 14:37:04 +09:00
Robert Lefebvre c9d5b6aa7f Arducopter: Change Attitude logging to use common-vehicle logging in DataFlash library. 2015-01-21 14:36:59 +09:00
Randy Mackay 80f59694d0 Copter: remove deprecated Guided-Spline
Guided-Spline has been replaced by Guided-PosVel
2015-01-07 14:03:50 +09:00
Jonathan Challinger bc29008233 Copter: add guided_posvel 2015-01-07 14:02:21 +09:00
Robert Lefebvre e10e020062 Copter: Add Landing Gear functionality to main code 2015-01-07 11:58:16 +09:00
Randy Mackay 67fdfffc2a Copter: remove OF_Loiter PIDs and tuning 2014-12-08 14:58:18 +09:00
Jonathan Challinger 387f3276cb Copter: handle SET_POSITION_TARGET mavlink messages 2014-11-17 14:38:55 -08:00
Jonathan Challinger 1b1327dc93 Copter: add Guided_Spline mode 2014-11-17 14:38:48 -08:00
Jonathan Challinger 80ba40d149 Copter: CPU failsafe logs an error 2014-11-08 11:27:16 +09:00
Jonathan Challinger d7d8330303 Copter: loiter copter without accepting user input at end of auto mission 2014-10-20 10:46:14 +09:00
Andrew Tridgell c3d839456b Copter: support logging while disarmed 2014-10-17 16:29:59 +09:00
Randy Mackay b9977a1115 Copter: add land_complete_maybe flag 2014-09-19 16:43:15 +09:00
Randy Mackay 3fa3cb6d65 Copter: remove EPM neutral from ch7/ch8 switch
The EPM library returns the pwm output sent to the EPM to the neutral
position automatically meaning an explicit ch7/ch8 setting is not
required
2014-09-17 21:13:45 +09:00
Randy Mackay 14d80910ec Copter: integrate EPM ver2 2014-09-17 21:13:35 +09:00
Jason Short 882edaf787 Copter: add pitch axis flipping
Added Pitch axis flipping. You must be pushing forward or back 3° to make it flip in Pitch axis or it will flip in the default roll axis.
Added some extra throttle control to maintain altitude
removed the CH7 ability to exit Flip mode. It will exit only if completing flip or user aborts with control sticks.
2014-08-23 23:40:07 +09:00
priseborough 162b824424 Copter : Distinguish between EKF and INAV errors 2014-08-18 14:17:50 +09:00
Randy Mackay 5b114dcad5 Copter: remove unused WP_OPTION definitions
This also kicks off the build for AC3.2-rc5
2014-08-16 12:18:48 +09:00
Andrew Tridgell e260f1c569 Copter: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Randy Mackay 4723ed5e6e Copter: rename EKF check's error message to dataflash
It checks more than the compass so the old error message was misleading.
2014-08-09 15:48:42 +09:00
Randy Mackay 0518439841 Copter: move relay from ch6 to ch7/ch8 2014-08-09 13:37:12 +09:00
ggregory8 3832c46998 Copter: Add takeoff enum for guided_mode 2014-08-05 10:25:29 +09:00
Randy Mackay 8a07701d07 Copter: remove ch6 tuning of INAV_TC
Users normally never change these parameters and if by chance they do want
to, they can set them before flying
2014-08-01 15:14:42 +09:00
Andrew Tridgell 3ccac6736d Copter: rename TELEM2_PROTOCOL to SERIAL2_PROTOCOL
this matches SERIAL2_BAUD
2014-07-30 14:49:10 +10:00
Matthias Badaire 147e91877e Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:19 -07:00
Randy Mackay 7cc1501dc6 Copter: integrate baro glitch protection 2014-07-28 22:16:20 +09:00
akdslr dc67058771 ArduCopter: Removed CONFIG_SONAR_SOURCE, SONAR_SOURCE_ADC, and SONAR_SOURCE_ANALOG_PIN since no longer used 2014-07-24 14:41:55 +10:00
Randy Mackay 7bda6cbadf Copter: integrate EKF check
Check runs at 10hz
Log ekf check failures and ekd failsafes
2014-07-22 23:13:25 +09:00
Andrew Tridgell 49954a3a61 Copter: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Randy Mackay 65e5367619 Copter: rename hybrid to poshold 2014-07-11 14:09:01 +09:00
svefro e892b4cd04 Copter: Ch7/8 option to retract mount
-Define AUX_SWITCH_RETRACT_MOUNT in defines.h
-Added 27=Retract Mount to Parameters.pde CH7 and CH8
-added int on CH7/8opt AUX_SWITCH_RETRACT_MOUNT
-Added Case #if Mount == ENABLE to set mount mode
made set_mode public in AP_Mount.h lib
2014-07-10 13:03:28 +09:00
Robert Lefebvre 1f422c86c1 Arducopter: Add independent rate roll and pitch P, I, D tuning options. Add rate feedforward tuning options for tradheli. 2014-07-08 20:18:08 +09:00
Randy Mackay f5640dadbf Copter: guided mode velocity controller 2014-07-06 17:01:08 +09:00
Randy Mackay fdc0ec837b Copter: add nav_guided suport to Auto mode 2014-07-06 17:00:31 +09:00
Andrew Tridgell 21b0b3bc15 Copter: log up to 3 mags 2014-07-04 12:07:59 +10:00
Randy Mackay 8c488ebd87 Copter: use common Log_Write_Camera
pair programmed with Craig Elder
2014-06-17 14:11:39 +10:00
Randy Mackay 810c87969c Copter: Ch7/8 switch to enable/disable feed forward and accel limiting 2014-06-10 20:03:04 +09:00
Andrew Chapman 3f0a52cb53 Copter: ch7/8 switch for auto pause/continue
- added new mode for CH7/CH8 (#24, auto mission reset)
- changed mission.start() to mission.start_or_resume() in auto_init()
2014-05-08 23:09:42 +09:00
Randy Mackay b5ed23f592 Copter: integrate skeleton Hybrid mode 2014-04-23 14:59:17 +09:00
Randy Mackay 7af5d4a8ce Copter: remove RALLY_WP_SIZE definition 2014-04-19 15:00:30 +09:00
Andrew Chapman fa3732ac6d Copter: integrate AP_Rally 2014-04-19 15:00:23 +09:00
Randy Mackay e6d2692eab Copter: Loiter_Turns moves to edge of circle if location provided 2014-04-16 16:28:08 +09:00
Emile Castelnuovo 9e31f032c2 Copter: added VRBRAIN board #includes and #defines 2014-04-08 16:19:20 +10:00
Randy Mackay 47c1cb8b99 Copter: log parachute events 2014-04-07 13:36:59 +09:00
Randy Mackay 340f3a7f9d Copter: ch7/ch8 parachute release 2014-04-07 13:36:47 +09:00
Andrew Tridgell 640b64f5e4 Copter: convert to new GPS API 2014-04-01 06:38:24 +11:00
Randy Mackay 0822adfb34 Copter: integrate spline navigation 2014-03-28 09:22:59 +09:00