Commit Graph

47 Commits

Author SHA1 Message Date
Andrew Tridgell b43c58f6c3 Copter: use cleaned up APIs 2021-07-04 08:19:11 +10:00
Leonard Hall 3b0a870504 Copter: Rename set_yaw_target_to_current_heading 2021-05-26 16:03:05 +09:00
Leonard Hall e294991b08 Copter: Fix before squash 2021-05-24 20:13:37 +10:00
Leonard Hall caeaf7c047 Copter: Fix take off altitude 2021-05-24 20:13:37 +10:00
Leonard Hall 4bae8f03a4 Copter: Use PosControl fixes 2021-05-24 20:13:37 +10:00
Peter Barker e7a9e0acb4 Copter: move brake state into a structure 2021-04-06 07:53:23 +09:00
Rishabh 618282e996 Copter: Remove avoidance completly from poshold 2021-03-22 14:04:42 +09:00
murata 44a622ea7f Copter: Set the gravitational acceleration value to the defined value 2021-01-05 09:11:14 +09:00
bnsgeyer c75848435e Copter: fix heli land detector and incoporate reset_I_smoothly 2020-12-21 23:33:48 -05:00
Randy Mackay 0f234583d6 Copter: poshold clears wind est when disarmed or landed 2020-11-10 08:56:36 +09:00
Randy Mackay 5b71726c73 Copter: poshold wind effect comp limited to 2/3rds of angle max 2020-09-16 08:19:17 +09:00
Peter Barker 1ffd697769 Copter: add missing fallthrough statements 2020-01-15 13:55:42 +11:00
Leonard Hall ffd838d908 Copter: Delay release of I term until take off 2019-11-09 09:40:10 +08:00
Peter Barker b0428f0fe8 Copter: make surface_tracking a class, various functions methods 2019-08-06 14:09:09 +09:00
Leonard Hall c56acb49d6 Copter: Add missing Loiter initialisation lines.
This command is missing to define the desired acceleration that loiter will initalise to.
loiter_nav->clear_pilot_desired_acceleration();
2019-07-20 16:40:51 +09:00
Leonard Hall 0e34d8b1ff Copter: PosHold fix for low brake_rate 2019-07-18 11:13:51 +09:00
Peter Barker 676d75c391 Copter: correct namespacing of Copter modes
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.

This was done mechanically for the most part.

I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker 3c436b30f0 Copter: have takeoff.start() handle clearing i terms and setting land-complete 2019-05-15 18:24:26 +10:00
Peter Barker 37c07e1d89 Copter: use enum class for roll/pitch mode
This adds some type-safety and helps distinguish between the many
defines which are used within PosHold mode

Saves about 210 bytes of flash
2019-04-30 08:36:59 +09:00
Peter Barker e28c6b9dc6 Copter: remove redundant poshold_ prefix on PosHold methods 2019-04-30 08:36:59 +09:00
Peter Barker f57a9f11cc Copter: move poshold state variables into mode object
This was simply moving the members from the poshold struct into the
class then mechanically removing poshold. from in front of the member
access.
2019-04-30 08:36:59 +09:00
Randy Mackay b7d0e4ec10 Copter: remove surface tracking shim functions 2019-04-19 07:45:52 +09:00
Randy Mackay 33a57361bd Copter: reduce args passed to get_surface_tracking_climb_rate
The same arguments are always passed in
2019-04-19 07:45:52 +09:00
Peter Barker 46a6f45e4a Copter: adjust for desired spool state and spool state renames 2019-04-14 12:18:03 +09:00
Randy Mackay d626ea66f1 Copter: poshold loses stray set-desired-spool-state
spool state is all handled higher up in the poshold state switch statement
2019-04-08 09:42:21 +09:00
Leonard Hall 593925567b Copter: formatting fixes 2019-04-08 09:42:21 +09:00
Leonard Hall 38cc5a817f Copter: consolidate mode state decisions
bnsgeyer and rmackay9 contributed to these changes

make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
Patrick José Pereira 33764d6c3b Copter: Fix typo
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-03-26 15:39:23 +11:00
Peter Barker fab2d59a1c Copter: move check for position up 2019-03-01 13:43:20 +09:00
murata 8644f4d76e Copter: Disable option code
Copter: Revert change

Copter: Change mistakes
2019-02-26 10:00:00 +09:00
Peter Barker f0ea4af514 Copter: rename get_velocity_xy to get_speed_xy 2019-02-07 09:03:17 +09:00
Randy Mackay 50c5ad7076 Copter: TradHelis force spool up before takeoff 2019-01-15 11:41:44 +09:00
bnsgeyer ca565675f2 Copter: Tradheli gets support for spool logic 2019-01-15 11:41:44 +09:00
Leonard Hall 2ddb3f6697 Copter: desired-ground-idle replaces spin-when-armed 2019-01-15 11:41:44 +09:00
Peter Barker 26ca75efae Copter: make libraries get EKF control limits themselves 2018-10-09 10:47:38 +11:00
Michael du Breuil 7e1ed948f5 Copter: Cope with AC_PosControl renaming 2018-09-20 15:15:45 -07:00
Leonard Hall 17b61f72a3 Copter: Initialise desired acceleration before loiter init 2018-09-19 08:34:08 +09:00
Peter Barker ff17c78c67 Copter: create Copter::Mode::_TakeOff subobject from takeoff_state 2018-06-26 09:11:21 +09:00
Peter Barker 4e3bbe9311 Copter: move sanity check for rangefinder alt to within protected func
get_surface_tracking_climb_rate can do an additional check....
2018-06-06 08:33:56 +09:00
Randy Mackay 59e4749fd0 Copter: integrate AC_Loiter
includes param conversion
2018-04-04 10:45:10 +09:00
Ebin d8f56b3511 ArduCopter: changed signature for get_pilot_desired_lean_angles()
Removes first two redundant input parameters, makes fn non static, makes fn const
2018-03-19 17:51:39 +09:00
Randy Mackay 1035645f5c Copter: poshold always resets loiter I term 2018-03-16 13:50:57 +09:00
Leonard Hall 93de23e7c4 Copter: get-pilot-desired-lean-angles accepts another angle-max 2018-03-16 13:50:57 +09:00
Leonard Hall 9544b1763b Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc 2018-03-16 13:50:57 +09:00
Andrew Tridgell 0ed75052f8 Copter: enable parameters inside mode objects
this adds FHLD_* parameters for FlowHold mode. It is a large patch as
it needs to disentagle the mode class to enable it to be used in
Parameters.h
2018-02-08 17:36:33 +11:00
Peter Barker ab7a9c9073 Copter: use zero_throttle_and_relax_ac in poshold, drift and autotune 2018-02-02 14:59:16 +09:00
Randy Mackay c3fbf2671c Copter: rename control_xx.cpp files to mode_xx.cpp 2017-12-12 10:39:26 +09:00