Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
35,066 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

196 Commits

Author SHA1 Message Date
DOMINATOR\Eugene d3eb24bc01 AP_Airspeed: Temperature conversion in consistence with other libraries 2018-11-19 17:31:12 +00:00
DOMINATOR\Eugene c81f9e6baa AP_Airspeed: update data with logging 2018-11-17 07:52:42 +11:00
Andrew Tridgell fe064a2d4e AP_Airspeed: use WITH_SEMAPHORE() 
and removed usage of hal.util->new_semaphore()
 2018-10-17 12:54:22 +11:00
Michael du Breuil 88aa20d691 AP_Airspeed: Make user facing messages clearer, improve handling of bad tube order 2018-10-02 06:28:47 +10:00
liang.tang 653766c4cc AP_Airspeed: uavcan airspeed supported 2018-09-05 17:22:08 +10:00
liang.tang f4a8006333 AP_Airspeed: fix spd3x correct pressure issue 2018-09-02 16:38:51 -07:00
Michael du Breuil f2b4e06a1a AP_Airspeed: Add 5"H2O DLVR differential sensor driver 2018-08-08 09:07:17 +10:00
Michael du Breuil 6225f51815 AP_Airspeed: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil fc44f693e5 AP_Airspeed: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil 57f3e9cd88 AP_Airspeed: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Andrew Tridgell 8a2f1fdb3d AP_Airspeed: fixed airspeed filtering issue 
this fixes an issue where an airspeed sensor that becomes unhealthy
can have an undue effect after the sensor becomes healthy again.

In a recent flight log the MS4525 airspeed sensor went unhealthy for a
few seconds, and at the same time gave a reading of 12m/s. The plane
was flying at 24m/s. While the sensor was unhealthy the code correctly
switched to the airspeed estimate, which was fine.

When the airspeed sensor become healthy again the IIR filter in
AP_Airspeed meant that the speed read at 12m/s initially, then came up
to 24m/s over a couple of seconds. This caused the VTOL motors to come
on for a few seconds.
 2018-06-14 09:13:30 +10:00
Michael du Breuil abd5bffda5 AP_Airspeed: Clean up some comments, prevent a potential out of range access 2018-05-29 00:10:40 +01:00
Patrick José Pereira 237101a50e AP_Airspeed: Use SSL air density 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-05-23 02:36:43 +01:00
Michael du Breuil f6624cc8b2 AP_Airspeed: Use named float wrapper 2018-05-17 00:59:45 +01:00
Peter Barker 30f944b921 AP_AirSpeed: notify of calibration start 2018-04-02 23:25:05 +01:00
Michael du Breuil a46c60f4de AP_Airspeed: Create a singleton 2018-03-21 13:36:35 +00:00
Tom Pittenger b1a4540359 Revert "AP_Airspeed: blending of several sensors and failure recognition" 
This reverts commit 26c7614118.
 2018-03-09 13:12:05 -08:00
Eugene Shamaev 26c7614118 AP_Airspeed: blending of several sensors and failure recognition 2018-03-09 11:27:20 -08:00
Peter Barker a7647e77d9 AP_Airspeed: fix compiler warnings 
In file included from
../../libraries/AP_Airspeed/AP_Airspeed_SDP3X.cpp:21:
../../libraries/AP_Airspeed/AP_Airspeed_SDP3X.h:57:11: warning: private
field '_temperature' is not used [-Wunused-private-field]
    float _temperature;
          ^
../../libraries/AP_Airspeed/AP_Airspeed_SDP3X.h:58:11: warning: private
field '_pressure' is not used [-Wunused-private-field]
    float _pressure;
 2018-03-02 09:26:37 +09:00
David Ingraham 2547ca399a AP_Airspeed: Fix ARSPD2_TYPE docs 2018-01-26 13:19:53 -08:00
Andrew Tridgell 58b0ac07ec AP_Airspeed: support dual airspeed sensors 
allow for a primary and secondary airspeed sensor
 2018-01-16 07:14:20 +11:00
rde-mato 87e3777f67 AP_Airspeed: added SDP3X airspeed sensor driver 2018-01-16 07:14:20 +11:00
Michael du Breuil 5fedc65efb AP_Airspeed: Allow specifying the MS5525 address 2018-01-10 17:49:35 +00:00
Andrew Tridgell 55f73f4163 AP_Airspeed: fixed timing errors in MS5525 driver 
this fixes issue #7188, where we could read from the MS5525 sensor too
soon after requesting data and the result coming back would be garbage
 2017-12-27 11:05:54 -08:00
Hiroshi Takey (hiro2233) fb5b6f2169 AP_Airspeed: Updated Airspeed example. 2017-12-26 14:57:58 +00:00
Andrew Tridgell 8c1cf9affe AP_Airspeed: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Peter Barker 1e512338f9 AP_AirSpeed: clarify comment 2017-11-23 10:40:30 +11:00
Lucas De Marchi 69b6d95cb2 global: use static method to construct AP_Board_Config{,_CAN} 2017-09-26 03:01:21 +01:00
Andrew Tridgell 2c68b5dac3 AP_Airspeed: fixed airspeed autocal 
don't use negative pressures
 2017-09-22 18:24:29 +10:00
Mark Whitehorn f32f51f843 AP_Airspeed: eliminate airspeed positive bias 2017-09-22 18:21:09 +10:00
Lucas De Marchi e2e836f676 AP_Airspeed: use FALLTHROUGH define 
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
 2017-08-22 23:59:13 -07:00
Francisco Ferreira d3ed4420e6
AP_Airspeed: remove unused MS4525D0_I2C_BUS macro 2017-08-05 03:15:52 +01:00
Vinicius Juvinski 78deddabda AP_Airspeed: MS4525: Add support to I2C Bus 2 
BBBMini use I2C Bus number 2 and MS4525 just use up to bus 1, so I
addedd this bus 2 to address struct.
 2017-08-05 03:15:32 +01:00
Peter Barker 3214b48f8c AP_AirSpeed: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Andrew Tridgell 7b73004882 AP_Airspeed: added ARSPD_USE=2 for gliders 2017-05-04 22:59:02 -07:00
Pierre Kancir 3f4a3e535b AP_Airspeed: example fix travis warning 
missing function declaration
implicit cast
some style fix
 2017-04-13 19:56:16 +01:00
Andrew Tridgell 6ec32472c5 AP_Airspeed: average two readings for airspeed 
given we're using it to check for errors, we may as well reduce analog
noise too
 2017-04-04 08:40:31 +10:00
Michael du Breuil 4932a8b9ef Airspeed: Sanity check MS4525DO data, and utilize a double read 2017-04-01 11:19:39 +11:00
murata af65be5aa4 AP_Airspeed: Change from magic number 0 to definition name. 2017-02-18 14:12:36 +00:00
murata 743d6e6db4 AP_Airspeed: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Lucas De Marchi f6a4a4dbe8 AP_Airspeed: MS5525: use common macros to deal with endianness 
Instead of calling a special method in the device, just use be16toh()
which is implemented for all platforms in our special sparse-endian.h
file. It has the advantage of using a special type for different
endianness and makes no assumption we are running on LE.
 2017-01-26 23:18:27 -08:00
Lucas De Marchi 5472bc4de1 Global: change Device::PeriodicCb signature 
Remove bool return as it's never being used and not supported on PX4.
 2017-01-14 10:03:54 +11:00
Tom Pittenger 84bdf15203 AP_Airspeed: updated comment to match PR 2016-12-05 17:19:57 -08:00
Andrew Tridgell 43bac678cd AP_Airspeed: Added MS5525 airspeed driver 
also improved averaging in MS4525 driver
 2016-12-05 16:51:49 -08:00
Andrew Tridgell 04731dccd6 AP_Airspeed: rename MS4525 driver 
ready for new driver types
 2016-12-05 16:51:49 -08:00
Andrew Tridgell 14a1f559c7 AP_Airspeed: added ARSPD_TYPE and use standard driver backend methods 
this will allow for new sensor types
 2016-12-05 16:51:49 -08:00
Andrew Tridgell 497b87fa65 AP_Airspeed: switched to in-tree I2C driver for all boards 2016-11-09 17:07:59 +11:00
murata c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
Peter Barker 42f3f7195b AP_Airspeed: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00