Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,840 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

631 Commits

Author SHA1 Message Date
Andrew Tridgell 937c485f91 APM: make it possible to run the CLI on any serial port 2012-11-21 21:41:34 +11:00
Andrew Tridgell 7436974e2f MAVLink: make it possible to enter the CLI over the radio 
this only works on the APM2, where UART0 is also the radio port
 2012-11-21 14:11:05 +11:00
Andrew Tridgell 68ae91a729 APM: added AMP_OFFSET option 
thanks to Alexey Kozin!
 2012-11-21 13:34:27 +11:00
Andrew Tridgell 1232075f83 APM: allow ailerons to move fully during servo demo 2012-11-21 13:34:27 +11:00
Andrew Tridgell 3cf492a637 APM: added a new type of auxilary aileron, with rc input 
a AileronWithInput assumes you have setup your RC transmitter to give
the right trim and input on the secondary aileron
 2012-11-21 13:34:26 +11:00
Michael Oborne 9ba3dd735b remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
Andrew Tridgell c13b6f3359 APM: support 16 character parameter names 2012-11-20 21:36:13 +11:00
Andrew Tridgell e3f94963d8 APM: set MANUAL_LEVEL to 1 on successful accel calibration 2012-11-20 19:27:52 +11:00
Andrew Tridgell 4174cfd4a7 INS: disable accel calibration on the 1280 
this would put us well over 128k in sketch size
 2012-11-20 18:41:04 +11:00
Andrew Tridgell c2910df935 APM: don't use mavlink msgs for accel cal in cli 2012-11-20 18:32:27 +11:00
Andrew Tridgell 81f7e2defd APM: k_param_imu is now unused 2012-11-20 18:32:27 +11:00
Andrew Tridgell 202513e327 MAVLink: fixed accel and gyro sensor offsets in MAVLink 2012-11-20 18:32:26 +11:00
Andrew Tridgell e6f322d88a APM: fixed throttle display to always be between 0 and 100 
when rc3 is below RC3_MIN, don't give an invalid value
 2012-11-20 13:50:19 +11:00
Andrew Tridgell 73a4dbf650 APM: fixed altitude_filter for new LowPassFilter syntax 2012-11-19 08:09:44 +11:00
Andrew Tridgell 85b87b752a APM: change WIND direction to match convention 
Thanks to Leo Hogg for pointing this out
 2012-11-19 07:16:47 +11:00
Andrew Tridgell 604ec021ec MAVLink: improve usefulness of logged GPS velocities 
we need them to align with time to use them for accelerations
 2012-11-17 17:45:30 +11:00
rmackay9 6a2cca3610 ArduCopter, ArduPlane: rename ap variable in GCS_Mavlink.pde to resolve compiler warning re shadowing of variable 'ap' 
Changed ArduPlane to keep function consistent with ArduCopter
 2012-11-12 13:30:04 +09:00
Andrew Tridgell b556ebf8b2 MAVLink: update compass health in SYS_STATUS 
this will make it easier to tell if a I2C error occurred in flight
 2012-11-12 11:26:54 +11:00
rmackay9 0907650456 ArduPlane: fix HIL build 2012-11-07 21:23:07 +09:00
rmackay9 e2b1cb7e8d AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9 9e3ae301b1 ArduPlane: move to use new INS library instead of IMU library 2012-11-07 19:21:03 +09:00
Andrew Tridgell efc2324666 APM: added RSSI_PIN option for receiver RSSI 
this allows you to configure the pin for receiver RSSI without
recompiling
 2012-11-06 22:04:41 +11:00
Andrew Tridgell 7d4be62906 APM: allow for arbitrary ranges and reversal on 2nd aileron 
this ensures you can setup a 2nd aileron with different reversal from
main aileron
 2012-11-05 23:37:58 +11:00
Andrew Tridgell f6ff6d8054 APM: remove unused variable 2012-11-05 15:22:56 +11:00
Andrew Tridgell 44e44b8c99 APM: use raw GPS velocity in GLOBAL_POSITION_INT 
a much more useful value to log
 2012-11-05 14:58:40 +11:00
Andrew Tridgell 67ba1a6068 APM: prepare for 2.66 2012-10-31 13:25:19 +11:00
Andrew Tridgell 189b984400 APM: fixed differential spoilers in manual mode 
make them follow the elevons
 2012-10-31 12:43:53 +11:00
Andrew Tridgell d5a04215bb APM: fixed additional aileron channels in manual mode 2012-10-31 12:43:53 +11:00
Xichen Shi f1fd7479bd APM: Added functionality to use differential spoilers in elevon mode 
spoiler 1 and 2 are connected to 2 auxiliary channels, functions are
set to 16 on left wing and 17 om right wing respectively. Worked in
FBW + mode (auto etc.). No manual mode supported yet (need more
channels in my case).
 2012-10-31 12:43:42 +11:00
Andrew Tridgell 110a2b8af6 APM: fixed loiter radius docs to reflect new limit 2012-10-30 16:19:24 +11:00
Pat Hickey 0dd0bd131a Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Andrew Tridgell d52a8b146b APM: fixed a comment typo 2012-10-16 17:21:04 +11:00
Andrew Tridgell 33d9ae23ff battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
rmackay9 e151d3735a ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
Andrew Tridgell 9226d94902 APM: fixed typo 2012-10-11 15:03:52 +11:00
Andrew Tridgell 6de0566404 APM: fixed auto-takeoff with zero lat/lng 
consider a non-zero altitude to mean that we should use the relative
altitude specified
 2012-10-11 15:03:00 +11:00
Andrew Tridgell d1f0b382ce APM: make error msg clearer 2012-10-11 11:51:24 +11:00
rmackay9 49eb36e0cb ArduPlane: added AP_Semaphore.h to list of includes 2012-10-06 13:14:28 +09:00
Michael Oborne 939ee1f4a9 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9 1cd4b08fac AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 4bca609b9f AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
Andrew Tridgell 83e061d564 APM: fixed build warning 2012-09-25 07:21:03 +10:00
Andrew Tridgell 812ed3d8bf APM: change to one low priority status buffer per GCS instance 
this allows us to operate the low priority messages on each link
independently.

Thanks to David Buzz for the suggestion!
 2012-09-24 17:39:19 +10:00
Andrew Tridgell f599962b90 APM: prepare for 2.65 2012-09-24 07:14:30 +10:00
Andrew Tridgell 061c676cc6 APM: fixed stick mixing for STABILISE mode 
this is embarrassing
 2012-09-24 07:14:30 +10:00
Andrew Tridgell bf9e2149df APM: prepare for 2.64 release 2012-09-23 19:32:56 +10:00
Andrew Tridgell 1f827d848b APM: fixed stick mixing in CIRCLE mode on throttle failsafe 
Many thanks to Andke for finding this bug!
 2012-09-23 19:27:42 +10:00
Andrew Tridgell 26e526c3ab APM: removed unnecessary waypoint_sending flag 2012-09-22 20:17:19 +10:00
Andrew Tridgell 0a1f428669 APM: send right parameter index when possible 2012-09-22 20:17:17 +10:00
Andrew Tridgell e6c6161e1a APM: fixed mission reset by setting waypoint to zero 
this does a full mission reset (equivalent to rebooting)
 2012-09-22 20:17:13 +10:00