Commit Graph

1556 Commits

Author SHA1 Message Date
deweibel@gmail.com a61ac47050 Correct bug in CLI log "enable all" command.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2733 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 01:58:41 +00:00
jasonshort 66798352c7 AC 2.0.32 Beta
new Loiter PIDs
tuned down control on standard frame
shunk the mixing range for sonar from 3 meters to 2 meters
added framework for Guided mode - not tested!
removed pitch and roll deadzone
decoupled SIMPLE mode from LOITER PIDs
Synced Mavlink with APM
Logs report correct WP number now.
disabled Sonar spike filter.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2722 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 22:44:59 +00:00
tridge60@gmail.com 8fcceaa919 AP_Compass: fixed calibration of 5883L compass
this fixes a compass initialisation bug where if the first value from
the compass isn't in the right range we would set bad calibration
scaling factors.

This also changes the maximum acceptable calibration values to 2000,
which is needed for the 5883 compass

pair-programmed-with: Randy Mackay

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2718 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:38 +00:00
tridge60@gmail.com e9bb030fd4 AP_Compass: report compass initialisation failure
don't just put out rubbish values

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2717 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:27 +00:00
rmackay9@yahoo.com fd2547216d AP_Compass_test - added display to auto detected compass
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 16:26:27 +00:00
jasonshort 1158e35945 Fixed bug in alt hold caused by false Sonar readings.
Reverted to prior Rangefinderlib in case that was causing bad sonar readings.
reduced crosstrack gains and max angle to avoid overshoots and oscillations.
added additional D gain to Loiter hold to prevent overshoots
added D gain to WP_nav to avoid speed oscillations
upped navigation speed to 6m/s from 4.5m/s


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2710 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 00:19:10 +00:00
jasonshort 98632a97c0 temporally revert to prior version of Sonar class to narrow in on a bug.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-30 22:32:26 +00:00
rmackay9@yahoo.com f7ba02f825 AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2700 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:47:53 +00:00
rmackay9@yahoo.com 151aa5d415 AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
jasonshort 88d258f804 clean up to work better with the Mission planner and enable Camera control.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2697 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 06:31:18 +00:00
jasonshort 0efd0fa1f3 changed camera stabilization to 1 instead of ENABLED
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2696 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-27 19:57:40 +00:00
jasonshort 7f3719086f 2.0.29
Fixed Mavlink issue
Added look at home option for SIMPLE mode. Off be default. Untested.
Upped performance of Yaw.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2695 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-27 17:01:53 +00:00
jasonshort db0e5760a4 removed redundant FP calcs for speed up.
added ability to alternate normalization and drift correction. Not fully implemented, needs further testing.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2691 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 22:54:08 +00:00
jasonshort 33362a86c2 2.0.28
Fixed a mode switch issue. 

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2685 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 17:02:47 +00:00
analoguedevices@gmail.com cbb4f3da76 commented out line 833 in main pde that was causing compile error, as per this report:
http://diydrones.com/forum/topics/2027-prolems-compiling-solved?xg_source=activity

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2679 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 14:15:26 +00:00
jasonshort 4f75842cbc 2.0.27
Fixed GCS updates, 
Clear GCS Streamrates by default.
moved fast PWM functions to run all the time (for quads, experiment)
cleaned up Mavlink a bit.




git-svn-id: https://arducopter.googlecode.com/svn/trunk@2678 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:38:11 +00:00
jasonshort ebfb132f34 IMU speedup by shorting the temp calculation. If someone bothers to temp calibrate their sensors, they'll need to edit this shortcut.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:23:22 +00:00
DrZiplok 569087199d Add a simple tool for dumping AP_Var data from an EEPROM dump.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
jasonshort a08cd5a6dc minor formatting, enabled sonar spike filter.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2670 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 05:59:06 +00:00
jasonshort 451f7e5339 extra \ removed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2669 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 00:42:57 +00:00
jasonshort 15ea3ac0b4 Forgot to add setup for V Octo support from Dani Saez
Added start of contributors list into code comments.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2668 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 17:09:59 +00:00
jasonshort 619a0837ce formatting
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2658 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:41:48 +00:00
jasonshort 1e8572f7c6 2.0.26
minor updates, 
Arming motors now for only Stabilize, Simple, and Acro Modes.
V Octo Support


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2657 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:37:54 +00:00
james.goppert 6959c2d6f9 Added debug/ upload targets to Arduino.mk
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
james.goppert f2457c94d9 Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
DrZiplok 8ab94794cd Enable map file generation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
deweibel@gmail.com 71d4015bc8 revert gps lib to 2602
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
deweibel@gmail.com b99362dc18 remove static declaration from idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2607 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:26:57 +00:00
deweibel@gmail.com 8a35079907 clean up idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
deweibel@gmail.com 0a0c6f9c26 Fix initialization of idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
dhcorley@msn.com d3d68ea4c7 re-sync rawgps cli test with APM2 (r2501)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2601 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 17:11:54 +00:00
jasonshort d090f92b66 Vector3<T>() { x = y = x = 0; }
changed to :
	Vector3<T>() { x = y = z = 0; }

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2600 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 16:31:31 +00:00
dhcorley@msn.com d52d441607 Add planner menu item on main menu . (issue tracker 194)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2599 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 15:17:08 +00:00
dhcorley@msn.com 315fb055b5 syncing planner.pde with APM2. For planner menu item on main menu . (issue tracker 194)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2598 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 15:12:55 +00:00
jasonshort 645d2fa333 2.0.25
changed Yaw to be offset from current angle to avoid the kick back.
Made minimum motor speed user settable, upped to 13% (130)
tweaked alt hold D to be higher and P to be slightly lower.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2579 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-19 05:31:33 +00:00
jasonshort b70d2d4c29 update to Baro lib to remove temp filtering.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2569 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-18 05:08:48 +00:00
jasonshort 0008f268af log merge with APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2568 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:12:10 +00:00
jasonshort 39b08decf3 AC2.0.24b
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2567 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:03:26 +00:00
jasonshort 3c27be40fc silly formatting
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2566 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:43:43 +00:00
jasonshort 16d1e5d0b8 removed some initial settings
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2565 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:35:11 +00:00
jasonshort 350b2c5ea2 added optimization note
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2564 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:34:23 +00:00
jasonshort dafe217178 made timeout public, settable
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:33:08 +00:00
jasonshort cb7da41e55 removed duplicate filter from ADC based input
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2562 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:30:37 +00:00
tridge60@gmail.com 60ae24dca6 disable the re-ordered initialisation warnings
these are not useful for us, and will always happen with our parameter
code

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2561 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:10 +00:00
tridge60@gmail.com 24491fce74 fixed warnings in PID.h
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2560 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:00 +00:00
tridge60@gmail.com 88b00edaf3 fixed warnings in AP_DCM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2559 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:51 +00:00
tridge60@gmail.com 439b65324d fixed a warning in AP_Var.h
index is in system headers as a string function

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2558 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:40 +00:00
jasonshort 153c166ef3 Based on Doug's recommendation - increased Accel weighting to .66 – 1.33 Gs
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2557 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 23:37:43 +00:00
jasonshort e63fe14ce7 the temp change in the state machine didn't really help the altitude issue after all. Need more testing as the temp sway is the major factor in the lack of air pressure accuracy.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2556 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 15:46:38 +00:00
jasonshort 07b09447a1 git-svn-id: https://arducopter.googlecode.com/svn/trunk@2555 f9c3cf11-9bcb-44bc-f272-b75c42450872 2011-06-14 06:05:18 +00:00