Peter Barker
8f1c255693
AP_Camera: stash information required for camera_feedback message
...
This means the data sent in the mavlink message is closer to the
information when the picture was taken, rather than when we decide we
have the space to send the mavlink message. When we process the
deferred request to send the camera feedback message is up to the
vagaries of mavlink scheduling, so the data can become quite out-of-date
2021-11-17 18:48:00 +11:00
Peter Barker
411ed0f50e
AP_RCProtocol: use data structure for serial configurations
2021-11-16 22:06:24 +11:00
Peter Barker
c1cdfb448c
AP_RCProtocol: move uart flow control set out of CRSF code
...
11:32 AM] AndrewTridgell: @Peter Barker we should disable flow control when we first add the uart - none of the RC protocols use flow control
[11:32 AM] AndrewTridgell: the blocking writes call isn't needed
[11:32 AM] Peter Barker: Thanks, I'll make a patch.
2021-11-16 22:06:24 +11:00
Rishabh
647cbe8b68
AC_Avoid: Convert Dijkstras to A-star
2021-11-16 15:08:16 +09:00
TunaLobster
0b2ebfefda
AP_WindVane: fix ADC scaling on IOMCU
2021-11-16 14:12:43 +11:00
TunaLobster
ba9381f40c
AP_RangeFinder: fix ADC scaling on IOMCU
2021-11-16 14:12:43 +11:00
TunaLobster
206a25fbcc
AP_RSSI: fix ADC scaling on IOMCU
2021-11-16 14:12:43 +11:00
TunaLobster
db6383eee7
AP_IOMCU: fix ADC scaling on IOMCU
2021-11-16 14:12:43 +11:00
TunaLobster
11f98f7421
AP_HAL_ChibiOS: fix ADC scaling on IOMCU
2021-11-16 14:12:43 +11:00
HefnySco
5aa3714e71
WEBOTS_SITL: adjust_params model
2021-11-16 13:30:12 +11:00
Josh Henderson
fb28b39206
AP_BattMonitor: remove old parameter conversion to allow setting BATT_MONITOR to 0
2021-11-16 11:58:01 +11:00
Shiv Tyagi
a747a4a19a
AP_Devo_Telem: fix gpsDdToDmsFormat method
...
This fixes gpsDdToDmsFormat method to correctly convert decimal degrees to degrees minutes with less precision loss
2021-11-16 11:37:10 +11:00
Peter Barker
514368537b
GCS_MAVLink: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
6b9ef0aba8
AP_Vehicle: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
f4651f0287
AP_Scripting: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
65b335ae0c
AP_Notify: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
55cdbd208d
AP_Motors: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
ff58afd4a2
AP_Mission: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
64aaf9d93d
AP_Frsky_Telem: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
13dc37fdcc
AP_DAL: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
a729ba165e
AP_Arming: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
8e15bf09a6
AC_AttitudeControl: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
fd128066ad
GCS_MAVLink: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
c090ddc65c
AP_Vehicle: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
6b4de23630
AP_Scripting: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
4eaba21e15
AP_Notify: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
9e8126d07c
AP_Motors: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
6fef352b8f
AP_Mission: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
39a4f0b3b2
AP_Frsky_Telem: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
c153225ccf
AP_Arming: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
38479905c0
AC_AttitudeControl: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Pierre Kancir
4037104f59
AP_UAVCAN: hide -Wcast-function-type warning on GCC11
2021-11-13 17:28:30 +11:00
Shiv Tyagi
516eafa45b
AP_Rangefinder: fail RF prearm checks for NoData/NotConnected statuses
...
Earlier we only failed RF checks if we could not detect an RF instance but we should also fail it if the RF is not connected or we receive no data.
2021-11-13 09:47:39 +09:00
Iampete1
c83ff858b8
Remove AP_SpdHgtControl
2021-11-13 08:05:39 +11:00
Iampete1
e0f03a3e09
AP_TECS: no longer child of SpdHgtController
2021-11-13 08:05:39 +11:00
Iampete1
7bf1fe1277
AP_Soaring: remove SpdHgt and use TECS direct
2021-11-13 08:05:39 +11:00
Iampete1
1c195d01b8
AP_Landing: remove SpdHgt and use TECS direct
2021-11-13 08:05:39 +11:00
Iampete1
29455adab4
AP_L1_Control: remove SpdHgt and use TECS direct
2021-11-13 08:05:39 +11:00
Peter Barker
eb6da9512f
AP_HAL_SITL: quieten i2c-device-creation diagnostics
2021-11-12 10:17:28 +11:00
Peter Barker
60453b2250
SITL: quieten MKFIFO warning in case of EEXIST
2021-11-12 09:56:28 +11:00
Peter Barker
5e18f98b8e
AP_RCProtocol: number all of the RC Protocols supported
...
Needed this as soon as we got the RC_PROTOCOL bitmask
2021-11-12 09:00:45 +11:00
Andy Piper
00da3520bc
Filter: set output slew rate to zero when max is zero.
2021-11-11 08:13:23 +09:00
Andy Piper
819645d1f6
AC_AutoTune: set slew rate to 0 while twitching
2021-11-11 08:13:23 +09:00
Andy Piper
e84a05d5ba
AC_PID: add slew_rate modifier
2021-11-11 08:13:23 +09:00
Bill Geyer
d2c37daa66
AP_Motors: change internal variable names and methods for mid collective to be more accurate
2021-11-10 16:45:17 -05:00
Bill Geyer
183b5e9e6d
AP_Motors: update H_SV_MAN parameter to reflect zero thrust collective
2021-11-10 16:45:17 -05:00
Bill Geyer
d02097bf1c
AP_Motors: add protection for new tradheli parameters
2021-11-10 16:45:17 -05:00
Bill Geyer
1a50dce206
AP_Motors: coll setup uses actual blade pitch angle
2021-11-10 16:45:17 -05:00
Andrew Tridgell
c3442d0143
hwdef: added alternative Durandal 20602 IMU
2021-11-11 08:28:51 +11:00
Patrick José Pereira
6ac7c2dbea
AP_HAL_Linux: Update SPIDevice for Navigator R4
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-11-10 18:11:34 -03:00