Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,968 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

5968 Commits

Author SHA1 Message Date
Andrew Tridgell 3552f3f9c5 AP_Baro: fixed example build 2012-11-24 21:07:41 +11:00
Andrew Tridgell eb5ac90e12 AC_PID: fixed example build 2012-11-24 21:07:34 +11:00
Andrew Tridgell 495dfc30e6 scripts: added build_example.sh script 
used to test the build of all our example code
 2012-11-24 21:06:52 +11:00
Andrew Tridgell 5818aaad42 Copter: fixed build error 
thanks to Marco for pointing this out
 2012-11-24 20:39:35 +11:00
Andrew Tridgell f6ec932d63 Copter: added reboot in CLI and over MAVLink 
useful for getting out of CLI
 2012-11-24 18:20:37 +11:00
Andrew Tridgell 56e4cbfb1d Plane: allow reboot on APM1, and add reboot to main CLI menu 2012-11-24 18:20:37 +11:00
John Arne Birkeland 77fa51dcec ArduPPM v2.3.12 ATMega32u2 (APM 2.x) 
---------------------------------------------
- New improved fail-safe detection and handeling for single or multible signal loss and receiver malfuntion
- Improved LED status for APM 2.x
- Improved jitter performance (PPM output using nested interrupts)

-------------------------------------------------------------
ARDUPPM OPERATIONAL DESCRIPTION
-------------------------------------------------------------

APM 2.x LED STATUS:
-------------------
RX - OFF         = No input signal detected
RX - SLOW TOGGLE = Input signal OK
RX - FAST TOGGLE = Invalid input signal(s) detected
RX - ON          = Input signal(s) lost during flight and fail-safe activated
TX - OFF         = PPM output disabled
TX - FAST TOGGLE = PPM output enabled
TX - SLOW TOGGLE = PPM pass-trough mode

SERVO INPUT (PWM) MODE:
 -----------------------
- PPM output will not be enabled unless a input signal has been detected and verified
- Verified inputs are lost during operaton (lose servo wire or receiver malfunction):
  + The PPM output channel for the lost input will be set to the default fail-safe value
  + PPM throttle output (ch3) will be permanently set to fail-safe (900us)
- Lost channel signal is restored:
  + PPM output for the restored channel will be updated with the valid signal
  + PPM throttle output (ch3) will not be restored, and will continue to output fail-safe (900us)

PPM PASS-THROUGH MODE (signal pin 2&3 shorted):
-----------------------------------------------
- PPM output will not be enabled unless a input signal has been detected
- Active signal on input channel 1 has been detected:
  + Any input level changes will be passed directly to the PPM output (PPM pass-trough)
  + If no input level changes are detected withing 250ms:
    + PPM output is enabled and default fail-safe values for all eight channels transmitted
    + Input level change detected again, PPM fail-safe output is terminated and normal PPM pass-through operation is restored
 2012-11-23 21:53:35 +01:00
John Arne Birkeland dc9438e57f ArduPPM(experimental): bug fix 
- Removed compiled firmware files to prevent acidentally spreading of experimental firmware.
 2012-11-22 17:07:05 +01:00
John Arne Birkeland dfb123e869 Merge remote-tracking branch 'origin/master' 2012-11-22 16:54:19 +01:00
John Arne Birkeland e077814e77 ArduPPM(experimental): Active input channel detection during init 2012-11-22 16:54:04 +01:00
rmackay9 74daf73c49 AP_InertialSensor: increase acceptable Z accel offset to be 3.0 G 
Note: Z offsets do tend to be larger than x and y offsets
 2012-11-23 00:34:42 +09:00
John Arne Birkeland 12e19617f5 Merge remote-tracking branch 'origin/master' 2012-11-22 14:25:27 +01:00
John Arne Birkeland e596978756 ArduPPM: Experimental PPM encoder to test possible fail-safe detection improvements. 2012-11-22 14:24:53 +01:00
Andrew Tridgell cd07d965a7 Copter: ported RSSI_PIN option from ArduPlane 
this is useful for OSD users
 2012-11-22 20:59:33 +11:00
Andrew Tridgell 2e63b3ae8e AP_GPS: added in two more dynamic model enums 2012-11-22 16:23:29 +11:00
Andrew Tridgell d5e1a75616 APM_RC: fixed APM1 example sketch 2012-11-22 15:42:33 +11:00
Andrew Tridgell d0a2feb99c APM_RC: added a test for ISR masking in APM_RC 2012-11-22 15:42:33 +11:00
rmackay9 3372355e07 ArduCopter: remove commented out remnants of roll_scale_d and pitch_scale_d 2012-11-22 12:50:39 +09:00
rmackay9 e32e0b03b4 DigitalWriteFast: added keywords for syntax colouring in Arduino IDE 2012-11-22 12:25:57 +09:00
rmackay9 eb6d8fca57 ArduCopter: added ReleaseNotes.txt 2012-11-22 09:51:04 +09:00
Robert Lefebvre 6ffc115236 Changes to get_throttle_rate() 
Commented out a bit of code that is not used currently
Change the output constrains to #defines so they can be easily changed, particularly for use in TradHeli.
 2012-11-21 17:11:38 -05:00
Andrew Tridgell dbdb3e1194 ACM: allow fetch of parameters by index 
this makes it more efficient to re-fetch parameters that are missing
 2012-11-22 00:16:57 +11:00
Michael Oborne 3e0f4345e7 firmware build 2012-11-21 19:33:46 +08:00
Andrew Tridgell f8a95e4084 APM: preparing for 2.67 release 2012-11-21 22:28:30 +11:00
Andrew Tridgell 0dc8dd5394 SITL: run the timer_scheduler() when there are no SITL packets 
otherwise we can block in the ADC code
 2012-11-21 22:20:14 +11:00
Andrew Tridgell a71c7b336d Revert "APM_RC: Modified get_last_update() to be more interrupt friendly" 
This reverts commit 50ba0ce4fa41c6d4101dff8da17c267a65750522.

It didn't build, and I want to do a release based on tested code
 2012-11-21 21:48:02 +11:00
Andrew Tridgell 24adc1aaa3 Rover: make it possible to run the CLI over a radio link 2012-11-21 21:41:34 +11:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Andrew Tridgell 84300c85d6 APM: make it possible to run the CLI on any serial port 2012-11-21 21:41:34 +11:00
Andrew Tridgell 11141d0af0 INS: make it possible to do accel cal on a different serial port 2012-11-21 21:41:34 +11:00
Andrew Tridgell d44ceb3fa5 FastSerial: added a vprintf_P() function 
used by CLI on UART2
 2012-11-21 21:41:34 +11:00
Andrew Tridgell ba4b9b9961 AP_Menu: allow menus to work on ports other than UART0 2012-11-21 21:41:34 +11:00
John Arne Birkeland e194c6c740 APM_RC: Modified get_last_update() to be more interrupt friendly 2012-11-21 10:34:04 +01:00
Andrew Tridgell 704da2a5d9 MAVLink: make it possible to enter the CLI over the radio 
this only works on the APM2, where UART0 is also the radio port
 2012-11-21 14:11:05 +11:00
Andrew Tridgell 8f108e2eb3 APM: added AMP_OFFSET option 
thanks to Alexey Kozin!
 2012-11-21 13:34:27 +11:00
Andrew Tridgell 61f2e18e2e APM: allow ailerons to move fully during servo demo 2012-11-21 13:34:27 +11:00
Andrew Tridgell fcbd3a823b APM: added a new type of auxilary aileron, with rc input 
a AileronWithInput assumes you have setup your RC transmitter to give
the right trim and input on the secondary aileron
 2012-11-21 13:34:26 +11:00
Andrew Tridgell d2170230f4 RC_Channel: added aileron_with_input aux function 2012-11-21 13:34:26 +11:00
Michael Oborne a5e3ce4655 remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
Michael Oborne 0c84b8abf1 fix unit max. and unit type 2012-11-21 07:42:53 +08:00
Andrew Tridgell 07f5baea9e SITL: added in recursion check in timer_handler() 2012-11-21 09:10:10 +11:00
Andrew Tridgell 833d433caf Semaphore: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:23 +11:00
Andrew Tridgell 6836a986f3 PeriodicProcess: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:23 +11:00
Andrew Tridgell f843705da3 INS: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:23 +11:00
Andrew Tridgell e331634bc5 AP_Baro: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:17 +11:00
Andrew Tridgell fc63087cb8 AnalogSource: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:09 +11:00
Andrew Tridgell c1a02e49a0 ADC: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:30:03 +11:00
Andrew Tridgell ccb1f1722e SITL: fixed a interrupt recursion bug 
this can be triggered by the timer scheduler re-enabling interrupts
 2012-11-20 22:29:26 +11:00
Andrew Tridgell 3c88b0d204 AP_Param: fixed Vector3f elements with 16 character names 2012-11-20 22:27:11 +11:00
Andrew Tridgell 800d1e8020 VARTest: remove old NAME_LENGTH limit 2012-11-20 21:39:25 +11:00