Michael Oborne
68aa5e4682
AC add ability to start new accel_scale via mavlink
2012-11-28 21:38:58 +08:00
Andrew Tridgell
2949d58b71
Copter: re-enable sending of GLOBAL_POSITION_INT message
...
this gives important raw GPS velocity information, plus relative and
absolute height
2012-11-28 11:26:19 +11:00
Andrew Tridgell
5818aaad42
Copter: fixed build error
...
thanks to Marco for pointing this out
2012-11-24 20:39:35 +11:00
Andrew Tridgell
f6ec932d63
Copter: added reboot in CLI and over MAVLink
...
useful for getting out of CLI
2012-11-24 18:20:37 +11:00
Andrew Tridgell
cd07d965a7
Copter: ported RSSI_PIN option from ArduPlane
...
this is useful for OSD users
2012-11-22 20:59:33 +11:00
Andrew Tridgell
dbdb3e1194
ACM: allow fetch of parameters by index
...
this makes it more efficient to re-fetch parameters that are missing
2012-11-22 00:16:57 +11:00
Andrew Tridgell
bcae83c4f6
ACM: make it possible to run CLI on radio port in ArduCopter
2012-11-21 21:41:34 +11:00
Andrew Tridgell
704da2a5d9
MAVLink: make it possible to enter the CLI over the radio
...
this only works on the APM2, where UART0 is also the radio port
2012-11-21 14:11:05 +11:00
Andrew Tridgell
bcf740a82f
ACM: support 16 character parameter names
2012-11-20 21:38:58 +11:00
Andrew Tridgell
69fbcc8683
MAVLink: fixed accel and gyro sensor offsets in MAVLink
2012-11-20 18:32:26 +11:00
Andrew Tridgell
531e62d3b5
MAVLink: improve usefulness of logged GPS velocities
...
we need them to align with time to use them for accelerations
2012-11-17 17:45:30 +11:00
rmackay9
cdfd3f9ccc
ArduCopter, ArduPlane: rename ap variable in GCS_Mavlink.pde to resolve compiler warning re shadowing of variable 'ap'
...
Changed ArduPlane to keep function consistent with ArduCopter
2012-11-12 13:30:04 +09:00
Andrew Tridgell
fddfb0b1a3
MAVLink: update compass health in SYS_STATUS
...
this will make it easier to tell if a I2C error occurred in flight
2012-11-12 11:26:54 +11:00
rmackay9
bcb9519fd7
ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues
2012-11-11 22:42:10 +09:00
rmackay9
95f6357d35
ArduCopter: fix APM2 build
2012-11-10 22:06:23 +09:00
Jason Short
d2a5928c06
Ap state updates
2012-11-09 22:15:15 -08:00
rmackay9
a1b4ec6d0e
ArduCopter: move to use new INS library instead of IMU library
2012-11-07 19:21:09 +09:00
Andrew Tridgell
e8ab62f6e5
ACM: switch to GPS velocity numbers in GLOBAL_POSITION_INT
...
these numbers are much more useful than the redundent rotated ground
speed. They tell us exactly what the GPS is giving to AHRS
2012-11-05 15:23:41 +11:00
Pat Hickey
bbc7f050e5
ArduCopter GCS_MAVLink: COMMAND_LONG for arm/disarm motors
...
Date: Wed, 26 Sep 2012 15:56:43 -0700
Subject: ArduCopter arm/disarm command consensus
From: Pat Hickey
To: Michael Oborne
Cc: "Craig J. Elder", arducopter
<arducopter@googlegroups.com>,
mavelous <mavelous@googlegroups.com>
Michael,
Per our discussion today,
In a MAVLINK_MSG_ID_COMMAND_LONG
A MAV_CMD of type MAV_CMD_COMPONENT_ARM_DISARM
with component id MAV_COMP_ID_SYSTEM_CONTROL = 250,
uses param index 1 to specify an arm/disarm motors event: 1 to arm,
0 to disarm
Thanks for working this out with me. Sorry to get it so completely
wrong the first time around!
Best
Pat
2012-10-10 18:59:55 +08:00
Michael Oborne
a38fef65c7
AP,AC Add ability to override an altitude in any auto mode, on the current active target
2012-09-30 07:29:33 +08:00
Jason Short
e8e8c27db4
ACM Mavlink - fixed comparison of unsigned to signed int by casting to uint8_t
2012-09-10 20:22:57 -07:00
Andrew Tridgell
e8d928cca4
ACM: added TELEM_DELAY to ArduCopter
2012-08-30 09:03:01 +10:00
uncrustify
f7a748d43b
uncrustify ArduCopter/GCS_Mavlink.pde
2012-08-21 18:56:01 -07:00
rmackay9
11e946eb54
ArduCopter, ArduPilot: revert mavlink delay callback to be "unsigned long"
2012-08-18 20:34:41 +09:00
rmackay9
2e4e8bbf1a
ArduCopter: changed "unsigned long" to "uint32_t"
2012-08-18 19:05:55 +09:00
rmackay9
36f947acb9
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Andrew Tridgell
ed064b2506
MAVLink: enable fetching of single parameters
...
this makes it possible for the GCS to fetch a single parameter by
name, which is useful for parameters that change in flight
2012-08-16 10:14:46 +10:00
Andrew Tridgell
dc47074dbd
MAVLink: removed the need for Mavlink_compat.h
...
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
Andrew Tridgell
2a7b298bbc
MAVLink: moved mavlink variables back to library
...
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Andrew Tridgell
c2a4d59132
AP_Param: update ArduCopter core for new AP_Param interface
2012-08-08 12:11:57 +10:00
Michael Oborne
e577b51e17
AC remove attitude hil unused extra (gps jump issue.)
2012-07-29 08:18:41 +08:00
Michael Oborne
ef870e3ca1
AC remove some attitude HIL limitations
2012-07-28 13:59:30 +08:00
rmackay9
8e5312a759
ArduCopter: add support for MAVLink's MAV_CMD_NAV_ROI command
...
do_nav_roi and verify_nav_roi functions added to turn the copter and/or mount in response to a MAV_CMD_NAV_ROI way point
2012-07-25 11:02:54 +09:00
Andrew Tridgell
85465c9126
MAVLink: fixed another two places where micros() was used for a millisecond time
2012-07-20 11:57:15 +10:00
Jonathan Challinger
fc4f111d15
Changed mavlink GLOBAL_POSITION_INT.relative_alt message to correctly return altitude above ground.
2012-07-17 16:15:11 +10:00
Andreas M. Antonopoulos
a976a59c88
AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling.
2012-07-16 11:46:43 -07:00
Andreas M. Antonopoulos
c73f7ef3ab
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Andrew Tridgell
8220ae8096
MAVLink: climb_rate is in m/s
2012-07-05 13:20:26 +10:00
Andrew Tridgell
60caaa4b04
MAVLink: remove MAVLink 0.9 protocol support
...
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Jason Short
3cf16c1424
GCS_Mavlink.pde
...
removed Approach define
2012-07-01 13:40:11 -07:00
Jason Short
c276fe8fa0
GCS_Mavlink: added notes to #if malink10
2012-06-29 21:20:28 -07:00
Andrew Tridgell
55092c25a6
SITL: enable the SIM_* parameters in ArduCopter and ArduPlane
2012-06-29 15:10:52 +10:00
Andrew Tridgell
dae1a57dc5
ACM: adapt the ArduCopter code for new barometer interface
2012-06-27 16:01:50 +10:00
rmackay9
068fe64b9b
ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float)
2012-06-26 22:50:17 +09:00
Jason Short
46fb3b783a
GCS_Mavlink.pde : mav_nav only used in legacy Mavlink.
2012-06-25 23:08:25 -07:00
Jason Short
c71c503c84
GCS Mavlink.pde: change reference to nav_bearing to target_bearing.
2012-06-25 23:06:28 -07:00
Andreas M. Antonopoulos
bef005b5f2
AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane
...
http://code.google.com/p/arducopter/issues/detail?id=430
2012-06-24 17:01:25 -07:00
Michael Oborne
14be88dd55
AC: add hilstate message
2012-06-04 16:24:08 +08:00
Andrew Tridgell
7c63d2c17b
ACM: MAVLINK10 uses HIL_STATE
...
thanks to Michael for noticing this
2012-06-04 13:31:07 +10:00
Andrew Tridgell
3f4e87cccc
ACM: fixed HIL build for MAVLINK10
2012-06-04 13:14:52 +10:00