Randy Mackay
be29b23195
Copter: do-mount-control ignored if no mount
...
Co-authored-by: srirajshukla <srirajshukla@gmail.com>
Co-authored-by: Yash Vadi <yvadi9274@yahoo.com>
2021-03-16 10:07:16 +09:00
James O'Shannessy
d055d7a581
ArduCopter: Cleanup - removes autoenabling of fence with AC_Fence parameter
2021-03-05 14:52:46 +11:00
James O'Shannessy
f14e1c2799
ArduCopter: Ensure fence has opportunity to auto disable for landing
2021-03-05 14:52:46 +11:00
James O'Shannessy
a88f2721a8
ArduCopter: Use auto enable and auto disable from AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
f228adfa75
ArduCopter: Improve auto-enable/disable of fence
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
92122e5133
Copter: automatically enable and disable floor fence on automated takeoff and landing
2021-03-05 14:52:46 +11:00
Patrick José Pereira
ad82e01270
ArduCopter: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Leonard Hall
5efe94a771
Copter: use AP_Math control functions
2021-01-20 18:19:40 +11:00
Randy Mackay
0b83d45163
Copter: verify land and payload place record flow-of-control internal error
2021-01-20 09:12:02 +09:00
Randy Mackay
b8c58bd900
Copter: payload place fixups
2020-12-05 08:35:03 +09:00
Michael du Breuil
f9b4e81702
Copter: Add ignore pilot yaw to guided, auto and RTL options
2020-11-19 07:22:54 +09:00
Randy Mackay
7a90ed4bb5
Copter: auto allows arming casts param to uint32_t
2020-10-20 23:04:45 +09:00
Randy Mackay
c1c9d87efe
Copter: move auto allows_arming in mode_auto.cpp
...
this should be a non-functional change
2020-10-20 23:04:45 +09:00
Randy Mackay
8b3cc0b255
Copter: fixup auto options
2020-10-01 08:48:06 +09:00
Michael du Breuil
50dfe3f197
Copter: Add AUTO_OPTIONS and support arming and throttle bypass
...
This allows you to arm the copter without any extra GCS commands while
in auto, and can be done from both the GCS, or the RC Tx. This is useful
for creating a simpler workflow.
This also allows you to set the auto_armed flag internally, which
bypasses the need to raise the throttle stick for the copter to start a
takeoff.
This exposed a problem where we would start running the controllers
before the EKF was at all initialized, if you switched into auto to
early. This now has a check that prevents us from running the mission
state machine until after the origin has been set. This was a suggestion
from @rmackay9.
When combined these options allow you to have the vehicle on the ground,
disarmed in auto with a takeoff waypoint loaded, then just arm the
aircraft and watch it takeoff. This is a feature we've had on quadplanes
for quite awhile now, and it has proven to be very nice for operators.
2020-10-01 08:46:29 +09:00
Randy Mackay
29a2be2d63
Copter: minor comment fix
2020-09-09 15:32:37 +09:00
Randy Mackay
925f76c048
Copter: integrate winch changes
...
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
2020-08-07 21:55:07 +09:00
Andy Piper
54c3d07547
Copter: make make/gimbal configurable on a per-board basis
2020-08-04 09:18:14 +10:00
Randy Mackay
d2b94bd45d
Copter: verify_circle removes redundant setting of circle center
...
the circle center is already set in circle_movetoedge_start
2020-06-03 10:08:52 +09:00
Andrew Tridgell
e673bd8909
Copter: implement disarm on land based on MIS_OPTIONS
...
only continue with mission if MIS_OPTIONS bit is set
2020-06-02 09:12:22 +09:00
murata
520782d7f2
Copter: Correction of spelling errors (NFC)
2020-05-18 13:26:11 +10:00
Randy Mackay
d9ecf51457
Copter: auto mode loiter-turns accepts pilot yaw input
2020-04-27 09:39:46 +09:00
Randy Mackay
c4b5d47e1f
Copter: white space fixes
2020-04-23 13:17:11 +09:00
Rishabh
1edf1d265c
Copter: Set correct yaw for circle in Mode Auto
2020-04-21 20:12:38 +09:00
Randy Mackay
71cbedb178
Copter: support circle with terrain altitude
2020-04-16 17:30:29 +09:00
Randy Mackay
8d99f204b0
Copter: integrate landing gear option and make edge based
...
also guided mode now retracts landing gear after takeoff
previously landing gear deployment was "level based" meaning the pilot could not override the gear's position
2020-02-26 08:01:00 +09:00
Peter Barker
ce5f23810b
ArduCopter: log disarm method
2020-02-22 12:16:29 +11:00
Randy Mackay
495c4ad6b6
Copter: remove unused ModeAuto::wp_start
...
this version accepts an offset from the ekf origin which is not required. All callers provide a Location
2020-02-17 14:30:18 +09:00
Randy Mackay
39a6b104dd
Copter: move RTLState to ModeRTL
2019-12-17 20:02:01 +09:00
Peter Barker
2296448027
Copter: make private enum class for LAND mode's state
2019-12-03 07:38:22 +08:00
Randy Mackay
de5945bea5
Copter: use const reference when retrieving wpnav destination
2019-11-12 08:50:05 +08:00
Randy Mackay
d0d07776ec
Copter: auto stays in takeoff submode after reaching altitude
2019-11-12 08:50:05 +08:00
Peter Barker
e6c6189fe5
Copter: cope with change in namespace of LogEvent enum
...
Also move Acro Trainer types into an enum class as the global defines
interfere with the Event names.
Also eliminate the Log_Write_Event wrappers.
2019-11-05 08:19:26 +08:00
Michael du Breuil
b42b1c08c4
Copter: Support new AP_Vehicle::set_mode
2019-10-25 08:48:22 +08:00
Peter Barker
b4537bebd8
Copter: move control_mode_t into being Mode::Number enum class
...
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
2019-09-13 13:12:08 +09:00
Peter Barker
c0774e74e0
Copter: fix format-string compilation warning
...
../../ArduCopter/mode_auto.cpp: In member function 'void ModeAuto::do_nav_delay(const AP_Mission::Mission_Command&)':
../../ArduCopter/mode_auto.cpp:1372:84: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat=]
gcs().send_text(MAV_SEVERITY_INFO, "Delaying %u sec",nav_delay_time_max_ms/1000);
^
This is with a mini-pix build.
2019-08-21 18:48:45 +09:00
Tom Pittenger
0983a04d52
Copter: NAV_Delay variable timers to be all unsigned and labeled as _ms
2019-08-19 15:24:06 -07:00
Randy Mackay
709c874d8b
Copter: integrate AP_OAPathPlanner
2019-08-17 09:42:43 +09:00
liang
e422f2b2fd
Copter: mode_auto: retract the landing gear automatically
2019-07-30 09:46:18 +09:00
Leonard Hall
c56acb49d6
Copter: Add missing Loiter initialisation lines.
...
This command is missing to define the desired acceleration that loiter will initalise to.
loiter_nav->clear_pilot_desired_acceleration();
2019-07-20 16:40:51 +09:00
Randy Mackay
b7a748df88
Copter: auto's wp_start accepts terrain alts
2019-07-18 09:01:09 +09:00
Peter Barker
e3da6d69d5
Copter: mode_auto: don't set takeoff dest from bad current location
2019-06-18 09:07:56 +09:00
Peter Barker
676d75c391
Copter: correct namespacing of Copter modes
...
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker
6dce39cbe1
Copter: use AP_Arming methods to arm and disarm vehicle
...
Really just changing the namespace of init_arm_motors
2019-05-30 07:37:30 +09:00
Randy Mackay
791b6effdd
Copter: fix wp distance and bearing reporting during LOITER_TURNS
2019-05-07 13:54:31 +09:00
Pierre Kancir
caf925eda5
Copter: factorize arm or land check
2019-04-16 10:17:47 +09:00
Peter Barker
46a6f45e4a
Copter: adjust for desired spool state and spool state renames
2019-04-14 12:18:03 +09:00
bnsgeyer
94738c3f86
Copter: change make_safe_shut_down to make_safe_spool_down
2019-04-08 09:42:21 +09:00
bnsgeyer
f96da56ad6
Copter: Allow safe shutdown before disarming
2019-04-08 09:42:21 +09:00
Leonard Hall
593925567b
Copter: formatting fixes
2019-04-08 09:42:21 +09:00
Randy Mackay
a6bfafefb0
Copter: move loiter and wpnav init out of make_safe_shut_down
...
resolves autotest RTLSpeed test failure
2019-04-08 09:42:21 +09:00
Leonard Hall
38cc5a817f
Copter: consolidate mode state decisions
...
bnsgeyer and rmackay9 contributed to these changes
make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
Peter Barker
c7e21d95ef
Copter: move Log_Write_Error into library
2019-03-27 12:36:40 +11:00
Peter Barker
366051c39f
Copter: use enum class for AltFrame enumeration
2019-03-19 10:31:18 +11:00
Randy Mackay
e57ec068f0
Copter: remove duplicate guided limit-init-time-and-pos
...
this is called from nav_guided_start()
2019-03-15 14:51:35 +09:00
Randy Mackay
8d66c5f547
Copter: move do_payload_place handler
...
commands are placed in numerical order
2019-03-15 14:51:35 +09:00
Peter Barker
281dbfcef8
Copter: support send_extended_sys_state
2019-03-12 09:16:13 +09:00
Peter Barker
fab2d59a1c
Copter: move check for position up
2019-03-01 13:43:20 +09:00
Randy Mackay
384bca9482
Copter: stop at waypoint depending upon next command
2019-02-27 13:30:40 +09:00
Arjun Vinod
d02d897928
Copter: make LOITER_TIME send "Reached command" message to GCS
2019-02-26 10:19:37 +09:00
Arjun Vinod
8044d98382
Copter: do an early-return if the time hasn't been reached
2019-02-26 10:14:56 +09:00
Peter Barker
5ae52038fa
Copter: make setting of home boolean in preparation for sanity checks
2019-02-15 08:28:45 +11:00
Peter Barker
228d7b676d
Copter: move responsibility for parachute deployment up
2019-02-13 09:25:27 +09:00
Peter Barker
587e02e92e
Copter: remove pv_ functions that duplicate Location functions
2019-02-06 11:02:50 +09:00
Randy Mackay
42c7f5ceb4
Copter: integrate WPNAV::set_speed_z split to set_speed_up and set_speed_down
2019-01-31 19:34:32 +09:00
Randy Mackay
717fb4d823
Copter: integrate AC_WPNav::get_speed rename to get_default_speed
2019-01-31 19:34:32 +09:00
Peter Barker
6fc76a32af
GLOBAL: use AP::logger() and strip redundant Log_ from methods
2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
845f015648
Copter: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Peter Barker
73940df48e
Copter: move mission into mode_auto
2018-11-09 13:35:40 +09:00
Peter Barker
7e581da1cf
Copter: implement misson LOITER_TO_ALT
2018-10-30 17:50:46 +09:00
Peter Barker
a339d77f08
Copter: let AP_Mission handle common camera commands
2018-10-30 15:37:18 +11:00
Peter Barker
f97281eb48
Copter: move servorelayevents mission handling into AP_Mission
2018-10-30 15:37:18 +11:00
Peter Barker
1eec264d6c
Copter: mission library handles gripper
2018-10-30 15:37:18 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
b74ae2d912
Copter: Obey and preserve DO_SET_ROI commands when executing LOITER_TURNS mission commands
2018-10-23 10:19:05 +09:00
Peter Barker
7af119b497
Copter: factor out loc_from_cmd from three functions
2018-10-16 10:17:12 +11:00
Peter Barker
5f552a6ce3
Copter: stop shadowing members of Copter
...
These references were taken to make the breaking out of Modes in Copter.
A lot of other code has already caused these sorts of things to go away,
but these particular ones seem reasonable to fix by pointing the users
at the copter object directly.
2018-10-16 10:17:12 +11:00
Peter Barker
e02a645354
Copter: use fabsf() instead of labs()
...
wrap_180_cd returns a float
substracting a float from an int32 returns a float
2018-10-16 10:17:12 +11:00
chobitsfan
d94663d5af
Copter: support changing vertical speed in DO_CHANGE_SPEED
2018-10-13 13:16:26 +09:00
Peter Barker
26ca75efae
Copter: make libraries get EKF control limits themselves
2018-10-09 10:47:38 +11:00
Leonard Hall
1b5b46dab5
Copter: Missing Loiter Init on accel
2018-09-19 17:29:55 +09:00
Michael du Breuil
470548a100
Copter: Allow starting mission commands to fail
2018-09-11 06:42:00 +10:00
Pierre Kancir
17c12dab2a
Copter: correct payload_place flytolocation
2018-08-17 21:14:57 +09:00
Pierre Kancir
84ff9c6928
Copter: switch to pos control when takeoff finish
2018-07-31 10:40:57 +10:00
Peter Barker
22f7f29045
Copter: move all of waypoint-takeoff into Mode namespace
2018-07-27 13:08:27 +10:00
Peter Barker
11aeec6dd1
Copter: factor out auto_takeoff_run from auto and guided
...
This code was identical.
2018-07-27 13:08:27 +10:00
Peter Barker
078d90132c
Copter: use AP_RTC
...
Co-authored-by: patrickelectric@gmail.com
Copter: AP_GPS now sets the system time directly
Copter: use AP_RTC for mission delays
Copter: Remove ap_t bits counter (Patrick José Pereira)
Change bits in ap_t to bool and add a static assert
2018-06-15 08:01:22 +10:00
apinxiko
e440583a7c
Copter: Beeping when first reaching waypoint while in holding there
2018-06-11 16:45:48 +09:00
apinxiko
5df4b9f6fd
Beeping when first reaching waypoint even while in holding there
2018-06-11 16:45:48 +09:00
apinxiko
a1fd1cb9b2
Copter: avoid keeping buzzing while in holding at waypoint
2018-05-25 14:02:13 +09:00
Peter Barker
7c8583d51d
Copter: implement sending of position_target_global_int
2018-05-18 20:26:37 +10:00
Peter Barker
8648db06b4
Copter: create autoyaw.cpp from all the bits of Copter::Mode::AutoYaw
2018-04-18 13:27:43 +09:00
Peter Barker
948b90ed97
Copter: rename roi_WP to just roi
...
A Vector3f is not a waypoint.
This should really be "Point Of Interest" rather than "Region Of
Interest"
2018-04-18 13:27:43 +09:00
Peter Barker
ba8b3e2415
Copter: create an AutoYaw helper object to hold auto-yaw state
2018-04-18 13:27:43 +09:00
Randy Mackay
59e4749fd0
Copter: integrate AC_Loiter
...
includes param conversion
2018-04-04 10:45:10 +09:00
Ebin
1ff4019ddf
ArduCopter: moved landing control fns from Copter to Mode
...
land_run_horizontal_control(),land_run_vertical_control(),get_alt_above_ground() moved to Mode
2018-03-29 16:50:00 +01:00
Bruno Camba
7b50517232
Copter: Moved commands_logic to mode_auto
...
Moved methods from commands_logic.cpp to
the mode_auto.cpp. Method order is
the same as declared in mode.h
2018-03-23 10:07:12 +09:00
Leonard Hall
9544b1763b
Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc
2018-03-16 13:50:57 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
5b7116bbbd
Copter: Fix else formating (NFC)
...
git history on these lines is not important, this is a simple else
2018-03-15 07:51:26 +09:00
Peter Barker
b9ad2bc8db
Copter: add option to disable AUTO mode
...
Saves ~12k of flash
2018-02-27 07:43:13 +09:00
Andrew Tridgell
0ed75052f8
Copter: enable parameters inside mode objects
...
this adds FHLD_* parameters for FlowHold mode. It is a large patch as
it needs to disentagle the mode class to enable it to be used in
Parameters.h
2018-02-08 17:36:33 +11:00
Peter Barker
114628afe4
Copter: use zero_throttle_and_relax_ac in stab, guided, acro and auto
2018-01-08 12:02:49 +00:00
Peter Barker
71ad1b5815
Copter: use zero_throttle_and_relax_ac function
2017-12-27 12:09:06 +00:00
Peter Barker
4c7491a05b
Copter: mode_auto's landing_gear_deploy method defers to mode_rtl
...
Since we defer our rtl_run behaviour to the RTL flightmode, it should
also specify the landing gear behaviour
2017-12-27 12:08:15 +00:00
Peter Barker
d9235d3d41
Copter: make landing_gear_should_be_deployed a base-class method
2017-12-27 12:08:15 +00:00
Peter Barker
6c82f7671d
Copter: move all commands logic into AUTO flightmode
2017-12-14 14:08:01 +09:00
Randy Mackay
2d23e1f7c7
Copter: rename flightmode_ objects to mode_
2017-12-12 10:39:26 +09:00
Randy Mackay
c3fbf2671c
Copter: rename control_xx.cpp files to mode_xx.cpp
2017-12-12 10:39:26 +09:00