Andrew Tridgell
5fce4f5f6d
SITL: added simple simulated jammer
2023-12-05 19:28:50 +11:00
Andrew Tridgell
c316de75d0
SITL: fixed whitespace in SIM_GPS.cpp
...
this one has been really bad for a while
2023-12-05 19:28:50 +11:00
Ryan Friedman
1ae13cd66d
SITL: Switch to using GPS Timestamp for 5 series driver
...
* The old descriptor is deprecated
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-12-05 11:09:22 +11:00
Peter Barker
0d9c658a1e
SITL: add missing includes
2023-12-04 07:04:12 +11:00
Peter Barker
97417a1038
SITL: rename SITL::GPS_GSOF to SITL::GPS_Trimble
2023-11-29 18:04:56 +11:00
Peter Barker
a143d2e453
SITL: remove trailing whitespace in SITL GPS drivers
...
we've just lost the history for these lines anyway
2023-11-29 18:04:56 +11:00
Peter Barker
d992ead5b1
SITL: rename GSOF to Trimble
...
... as now it's not just GSOF but also DCOL
2023-11-29 18:04:56 +11:00
Peter Barker
568d633dcc
SITL: break up GPS backends into separate files
2023-11-29 18:04:56 +11:00
Ryan Friedman
35b52a4604
SITL: Implement DCOL parser and bidirectional comms
...
* Implement DCOL command support for GSOF simulator
* Only send GSOF when enabled
* Publish only at the configured rate
* Only build GSOF packets when needed
* This saves CPU
* Make physics and read loop run at full rate
* The logic to rate-limit writes is now pushed to the backend
* Indent errors were fixed too
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 15:50:02 +11:00
Iampete1
d626928e0c
SITL: SIM IntelligentEnergy24: add error string to V2 protocol
2023-11-28 11:27:14 +11:00
Gone4Dirt
ab5d28073d
SITL: Add V2 telemetry protocol to IE24 fuel cell
2023-11-28 11:27:14 +11:00
Ryan Friedman
da0efa3323
SITL: Bump up read rate on SITL
...
* This is needed to do active configuration quickly
* Read/Write split and exposed to ensure physics/write rate is still
coupled to avoid impacting the jamming and delayed data
* Created a utility to allocate the SITL instance
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-21 15:29:46 +11:00
Peter Barker
afa263c691
SITL: set sitl point for GPS backends in constructor
...
_sitl is guaranteed non-nullptr by the SITL::GPS::update()
2023-11-18 13:59:28 +11:00
Peter Barker
a018bed042
SITL: improve MegaSquirt simulator fidelity
2023-11-17 13:09:02 +11:00
Peter Barker
ca16e924db
SITL: add simulator Hirth EFI
2023-11-17 13:09:02 +11:00
Peter Barker
2f710a4689
SITL: correct MegaSquirt simulation
2023-11-17 13:09:02 +11:00
Peter Barker
bd05fad850
SITL: add code to add, remove or corrupt bytes in SITL::SerialDevice xfrs
2023-11-17 10:56:25 +11:00
Peter Barker
2a2a103195
SITL: add JAE JRE simulator
2023-11-15 10:50:49 +11:00
Ryan Friedman
6273fee892
AP_GPS: Rename GSOF packing functions
...
* Added docs for why they exist
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-03 13:25:39 +11:00
Peter Barker
fbe690d44b
SITL: track simulated ADSB vehicles relative to simulation origin
...
removes dependence on ArduPilot AHRS library
Also removes vehicles based off vehicle simulated position rather than distance-from-origin, so you always have company
2023-11-02 15:52:42 +11:00
Peter Barker
4ec80076a1
SITL: correct bit for enabling MXS simulation
2023-11-02 15:52:17 +11:00
Andrew Tridgell
f7a1227c25
SITL: added SIM_MAG_SAVE_IDS
...
this controls whether SITL saves device IDs for compasses on startup
so the compasses always appear calibrated
2023-10-31 10:14:42 +11:00
Peter Barker
fd67c71eb0
SITL: add Sagetech MXS simulator
2023-10-25 20:06:47 +11:00
Andrew Tridgell
030dfe2fa1
SITL: use AP_BUILD_ROOT
2023-10-25 09:50:08 +11:00
Andrew Tridgell
928d50900a
SITL: use connect_timeout() for realflight
...
this gives much better handling of network glitches, preventing long
simulation timeouts which impact on the stability of the simulation
2023-10-23 20:27:49 +11:00
Anthony Luo
51cbaed9d9
SITL: fix typos
2023-10-05 12:54:43 +11:00
Anthony Luo
021d9717c4
SITL: document airspeed params
2023-10-05 08:18:44 +11:00
Andrew Tridgell
be01fcfdfd
SITL: use mavlink_XXX_encode_status()
...
this avoids clobbering sequence numbers and fixes race conditions
2023-10-02 21:45:28 +11:00
Samuel Tabor
40f62949b3
Send lat lon in SIM_STATE as int32_t extensions
2023-09-27 14:14:37 -07:00
Tom Pittenger
8c4d00e6f2
SITL: add a thermal at home
2023-09-27 12:19:00 -07:00
Peter Barker
34bceb8eec
SITL: log achieved speedup rate
2023-09-23 19:49:02 +10:00
Peter Barker
1208938d3b
SITL: fix balancebot yaw reset to be kinimatically consistent
...
... or at least closer to it.
We were hard-resetting the yaw to zero when the vehicle was upright. That makes for huge simulated gyro rates, and that means the differences between the gyros can be huge sample-to-sample, so we can get gyros-inconsistent errors.
Fix things so we don't reset yaw at the same time as pitch, and also twist the vehicle to point North again when disarmed.
2023-09-20 22:59:41 +10:00
Anthony Luo
f0d7a367f4
SITL: document SIM_FLOW_* params
2023-09-12 18:56:06 +10:00
James O'Shannessy
8125ba1a41
SITL: add hardware relay enable mask for passing relays through to hardware
2023-09-11 12:21:13 +10:00
Ryan Friedman
0432863832
SITL: Add missing shebang
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-09-08 17:09:26 +10:00
Peter Barker
d9818ae1ab
SITL: add simulation instructions for TSYS03 sensor
2023-09-06 23:00:30 +10:00
Anthony Luo
6201f56d40
SITL: document SITL GPS params
...
* Document GPS_LAG_MS
* Document GPS2_LAG_MS, Consistency fixes
* document DriftAlt & Hz
* document GPS_POS offsets
* document locktime and noise
* document GPS_ALT_OFS and GPS_HDG
* document GPS_ACC
* Finish documenting GPS parameters
2023-09-05 10:02:43 +10:00
Peter Barker
390b025fa0
SITL: add simulator for TSYS03 temperature sensor
2023-09-05 07:17:00 +10:00
Peter Barker
7e0c178c6c
SITL: add temperature to battery simulation
2023-09-05 07:17:00 +10:00
Anthony Luo
991e429afb
SITL: document SIM_GPS_BYTELOSS and SIM_GPS_NUMSATS
2023-08-31 16:58:06 +10:00
Andrew Tridgell
3508d7eaa9
SITL: added SIM_CAN_TYPE0 and SIM_CAN_TYPE1
...
this selects the transport to use for CAN
2023-08-29 15:09:48 +10:00
Ryan Friedman
461a8dc86f
SITL: split to MicroStrain5
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-08-29 10:31:44 +10:00
Peter Barker
7fff465251
SITL: SIM_ICEngine sends diagnostics to GCS rather than stdout
...
makes it much easier to see what the simulated engine is doing
2023-08-26 21:21:49 +10:00
Peter Barker
149921792c
SITL: document SIM_ACCx_BIAS_y
2023-08-26 16:15:58 +10:00
Andrew Tridgell
1b6c329de5
SITL: use NaN for invalid rangefinder data
...
needed to cope properly with terrain errors leading to negative
rangefinder data
2023-08-24 13:06:40 +10:00
Andrew Tridgell
4e71023018
SITL: added SIM_CAN_SRV_MSK
...
mask of outputs that will come from the CAN SITL peripheral
2023-08-24 13:06:40 +10:00
Andrew Tridgell
9cde659545
SITL: disable gimbal and ADSB in SITL periph
...
lack of MAVLink makes these problematic
2023-08-24 13:06:40 +10:00
Andrew Tridgell
791d0acefe
SITL: removed GPS FIFO
2023-08-24 13:06:40 +10:00
Peter Barker
84b3c9e267
SITL: reset balancebot to vertical in a kinmetically consistent manner
...
The hard-reset of all state variables means we feed the EKF inconsistent gyro data. Attempt to upright the vehicle with a simple p-gain when it is disarmed, as if someone is pushing the thing back upright
2023-08-21 22:09:04 +10:00
Michelle Rossouw
26bbd6536a
SITL: Improve Blimp dynamics and fin motion to be more realistic, allow SITL loop rate to be changed and add more logging
2023-08-21 21:01:47 +10:00