Commit Graph

170 Commits

Author SHA1 Message Date
Iampete1 f55267017b AP_Motors: Heli: Remove unused init_output return and don't assume single for initialised OK 2023-07-04 11:31:21 +10:00
Iampete1 d57ce2ad6f AP_Motors: Add motor test checks method to refuse test 2023-06-27 10:24:15 +10:00
Gone4Dirt 191ce55e1d AP_MotorsHeli: Remove pure virtuals and unnecessary overrides 2023-05-08 19:05:17 -04:00
Iampete1 81f3d3edda AP_Motors: Heli: get_output_mask return only motors 2023-05-05 22:20:16 -04:00
Leonard Hall 67205f8114 AP_Motors: Support changing update period 2022-12-13 17:10:06 +11:00
Iampete1 e72e5a2751 AP_Motors: add pre-arm check 2022-09-07 17:54:16 +10:00
Iampete1 c1a9f75034 AP_Motors: params always use set method 2022-08-03 13:43:48 +01:00
Peter Barker 434f49e6b6 AP_Motors: correct initialised_ok state for HeliDual+Quad
initialised_ok was being set to false when frame/class was set as the
method was not overridden and thus Heli's set_frame_and_class was
setting initialised_ok to false.  When the init_output method was called
it would be unconditionally reset to true.
2022-05-18 12:25:26 +09:00
Bill Geyer f7b420f131 AP_Motors: move turbine start to update_turbine_start and style cleanup 2022-02-23 14:22:47 +09:00
MidwestAire 77f0fdf112 AP_Motors:clean up whitespace in heli motors class 2021-12-14 22:50:05 -05:00
MidwestAire 42a131522b AP_Motors:Heli - new rotor speed control modes for autothrottle governor 2021-12-14 22:50:05 -05:00
Bill Geyer 3b40df133e AP_Motors: add spool down complete flag 2021-12-05 22:12:13 -05:00
Hwurzburg 2f4bcfb21c AP_Motors: change H_COLL_HOVER to H_COL_HOVER for consistency 2021-11-18 14:37:05 -05:00
Bill Geyer d2c37daa66 AP_Motors: change internal variable names and methods for mid collective to be more accurate 2021-11-10 16:45:17 -05:00
Bill Geyer 183b5e9e6d AP_Motors: update H_SV_MAN parameter to reflect zero thrust collective 2021-11-10 16:45:17 -05:00
Bill Geyer d02097bf1c AP_Motors: add protection for new tradheli parameters 2021-11-10 16:45:17 -05:00
Bill Geyer 1a50dce206 AP_Motors: coll setup uses actual blade pitch angle 2021-11-10 16:45:17 -05:00
Peter Barker 183cee3f2c AP_Motors: remove @Values from param metadata where @Bitmask exists 2021-06-23 18:37:34 +10:00
Hwurzburg 57ee6ffdfe AP_Motors: correct H_SV_MAN metadata warning 2021-05-25 10:22:21 +10:00
Peter Hall d0e1e85b9e AP_Motors: add get_frame_mav_type 2021-01-26 11:07:36 +09:00
bnsgeyer 6c8a85ee04 AP_Motors: updates to new integrator and make selectable 2020-12-21 23:33:48 -05:00
bnsgeyer 84fb3afbcb AP_Motors: Tradheli support for integrator management and hover collective learning 2020-12-21 23:33:48 -05:00
Peter Barker 41ab59dcdb AP_Motors: eliminate flags structure
Saves about 44 bytes
2020-09-22 20:26:24 +10:00
Randy Mackay 8629923783 AP_Motors: minor whitespace fix 2020-08-10 09:33:43 +09:00
Josh Welsh e77bc1ce9d AP_Motors: Tradheli servo_test fix 2020-08-10 09:16:44 +09:00
Randy Mackay 2d8c5a7bc4 AP_Motors: remove names from cpp files 2020-07-14 13:27:07 +10:00
bnsgeyer e193c45946 AP_Motors: tradheli-update parameter display names 2019-12-10 12:21:56 +09:00
bnsgeyer 05a30c756a AP_Motors: tradheli- fix metadata 2019-11-20 12:17:36 +08:00
bnsgeyer e91402aeb6 AP_Motors: tradheli-make all RSC params part of library
AP_Motors: Tradheli-fix RSC mode change while armed

AP_Motors: tradheli - improve RSC param metadata

AP_Motors: tradheli-put all throttle param settings in percent
2019-09-13 08:53:54 +09:00
Leonard Hall 036b47ec56 AP_Motors: Add seperate roll and pitch limits 2019-08-03 12:06:32 +09:00
Andrew Tridgell 8a49c84d57 AP_Motors: fixed col max and min for dual heli
fixes H_SV_MAN behaviour
2019-07-06 08:57:18 +10:00
ChristopherOlson fc84995fb9 AP_Motors:Heli - remove H_LAND_COL_MIN and replace with H_COL_MID 2019-06-04 09:48:03 +09:00
bnsgeyer f1a32d7872 AP_Motors: Tradheli- modified thrcrv and gov parameter group names 2019-06-03 07:53:01 +09:00
bnsgeyer 3629541a20 AP_Motors: Tradheli - implement enable params for throttle curve and governor 2019-06-03 07:53:01 +09:00
ChristopherOlson cca58e393a AP_Motors:Heli_RSC - add support for rotor speed governor with droop speed control 2019-06-03 07:53:01 +09:00
Peter Barker 1e606cdc5b AP_Motors: make desired spool state and spool state enum-classes
This will help avoid getting the enumerations mixed up
2019-04-14 12:18:03 +09:00
bnsgeyer 01bd99907b AP_Motors:Tradheli-swash library parameter scope improvement 2019-03-20 10:40:20 +10:00
bnsgeyer 8c46fe1c61 AP_Motors: tradheli-fix parameters for generic swashplate and other minor fixes 2019-03-20 10:40:20 +10:00
bnsgeyer 9f547cc328 AP_Motors: Tradheli - support for linear servo output for swashplates 2019-03-20 10:40:20 +10:00
bnsgeyer 28f4c68f2f AP_MotorsHeli: add spool logic support
Also moved heli init_target_on_arming flag in from vehicle code
2019-01-15 11:41:44 +09:00
bnsgeyer dec8c5de77 AP_Motors: convert heli code to use SRV_Channels
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations.  This change also
fixed servo initialization conflicts.

Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
2018-07-16 12:41:16 +10:00
bnsgeyer b20ebc6540 AP_Motors: Tradheli- removes unnecessary code from swash servo trim bug fix 2018-05-16 09:22:44 +10:00
bnsgeyer c8488e3333 AP_Motors: Tradheli - swashplate servo trim fix for heli single and dual frames 2018-04-24 10:30:26 +10:00
bnsgeyer 690e8fd3f4 AP_Motors: TradHeli - Changed RSC mode 3 to a spline fit throttle curve 2018-03-27 09:07:03 +11:00
ChristopherOlson 96793a3ae7 AP_Motors:TradHeli - DDVP Ramp/Runup
Change to ramp and runup DDVP tail rotor to prevent torque pitching the frame and provide runup in sync with main
rotor like a mechanically driven tail.

Fix some comments and remove indents found in whitespace in AP_MotorsHeli.cpp and AP_MotorsHeli.h
2018-03-14 09:18:07 +09:00
Andrew Tridgell e1f8e7bc58 AP_Motors: cope with H vs X frame in HeliQuad 2017-10-03 10:16:41 +11:00
Peter Barker 35d8f11e46 AP_Motors: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 1b062d9d29 AP_Motors: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 9d9ebc91cd AP_Motors: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00