rishabsingh3003
99f4f13369
SITL: Add simulator for tethered vehicle
2024-12-10 10:48:00 +11:00
Peter Barker
fab1ef7a87
SITL: add ability to simulate more than 2 GPSs
2024-11-20 15:07:45 +11:00
Bob Long
9fdd0a4e84
SITL: FlightAxis: add options bitmask parameter
2024-10-25 18:14:22 +11:00
Randy Mackay
a1579bc31e
SITL: integrate SlungPayload
2024-07-24 17:09:06 +10:00
Thomas Watson
ca0cd9a7e8
SITL: allow disabling CAN interfaces
...
Also corrects an issue where setting an invalid type could result in
undefined behavior.
2024-07-16 10:13:11 +10:00
Peter Barker
5994664bf9
SITL: add simulated tie-down clamp
2024-06-11 09:56:43 +10:00
Andrew Tridgell
1603869140
SITL: added SIM_WIND_TC
...
time constant for wind changes
2024-05-21 09:59:37 +10:00
Andrew Tridgell
67c506e75c
SITL: use new atmospheric tables
...
and improve pitot handling
2024-05-07 21:19:06 +10:00
Andrew Tridgell
53c0619a9a
SITL: added Glider SITL model
2024-05-05 07:57:54 +10:00
Andrew Tridgell
1976f3d2d6
SITL: added StratoBlimp simulator
2024-04-27 22:03:05 +10:00
Iampete1
30fdae880f
SITL: allow disabling MAVLink simstate messages
2024-04-23 09:16:55 +10:00
Andrew Tridgell
feb8c3be67
SITL: added SIM_OSD_ROWS and SIM_OSD_COLUMNS
2024-03-26 11:36:48 +11:00
Peter Barker
729c911462
SITL: add and use AP_RCProtocol_UDP
2024-03-25 22:35:04 +11:00
Peter Barker
e8708227a1
SITL: new Loweheiser generator/efi sim
...
Co-authored-by: Joshua Henderson <hendjoshsr71@gmail.com>
SITL: break out common GeneratorEngine code
2024-01-23 11:27:30 +11:00
Peter Barker
3a37796eb2
SITL: move simulated height_agl into fdm structure
...
allows value to be shipped via multicast to simulated peripherals
2024-01-08 20:00:01 +11:00
Andrew Tridgell
5fce4f5f6d
SITL: added simple simulated jammer
2023-12-05 19:28:50 +11:00
Peter Barker
ca16e924db
SITL: add simulator Hirth EFI
2023-11-17 13:09:02 +11:00
Andrew Tridgell
f7a1227c25
SITL: added SIM_MAG_SAVE_IDS
...
this controls whether SITL saves device IDs for compasses on startup
so the compasses always appear calibrated
2023-10-31 10:14:42 +11:00
Peter Barker
fd67c71eb0
SITL: add Sagetech MXS simulator
2023-10-25 20:06:47 +11:00
James O'Shannessy
8125ba1a41
SITL: add hardware relay enable mask for passing relays through to hardware
2023-09-11 12:21:13 +10:00
Andrew Tridgell
3508d7eaa9
SITL: added SIM_CAN_TYPE0 and SIM_CAN_TYPE1
...
this selects the transport to use for CAN
2023-08-29 15:09:48 +10:00
Andrew Tridgell
4e71023018
SITL: added SIM_CAN_SRV_MSK
...
mask of outputs that will come from the CAN SITL peripheral
2023-08-24 13:06:40 +10:00
Peter Barker
6b87318062
SITL: act on safety switch being enabled in SITL by zeroing outputs
2023-07-12 17:53:12 +10:00
bugobliterator
5f2dd4ab5c
SITL: add support for testing DroneCAN
2023-03-29 17:16:39 +11:00
bugobliterator
e7533c006b
SITL: add support for auxiliary IMUs
2023-03-21 10:04:16 +11:00
Peter Barker
4591895540
SITL: add gyro bias simulation
2023-02-24 09:21:42 +11:00
Andrew Tridgell
d3ea7b0ca6
SITL: added SIM_UART_LOSS parameter
2023-01-15 21:57:15 +11:00
Andy Piper
ec7be5c417
SITL: add parameters to control reading and writing IMU data to a file
...
add exit on stop to reading IMU data from a file
2022-12-28 18:14:56 +11:00
Andrew Tridgell
01cad1c4aa
SITL: added SIM_GPS_LOG_NUM
...
for replaying GPS logs recorded with --enable-gps-logging
2022-12-20 10:23:58 +11:00
Andy Piper
71a27027f1
SITL: add baro wind coefficients for Z-axis.
2022-12-14 19:19:58 +11:00
Andrew Tridgell
7039088c7b
SITL: added SIM_TIME_JITTER parameter
...
for adding timing jitter in SITL
2022-12-06 11:03:50 +11:00
Andrew Tridgell
1138f9e624
SITL: allow for extra actuators to be marked as motors
2022-10-16 20:38:19 +11:00
Andrew Tridgell
a0af08a3aa
SITL switched to motor_mask for which actuators are motors
...
this allows for any output to be an ESC, which allows for proper
simulation of quadplanes with ESCs on outputs 5-8 or 9-12, for testing
notch filtering
2022-10-16 20:38:19 +11:00
Peter Barker
6be8d9cd06
SITL: remove unneeded circular rangfinder include
2022-10-11 10:50:13 +11:00
jackhong12
4a4f361a17
all: use CLASS_NO_COPY() macro
2022-10-04 11:23:04 +11:00
Andy Piper
ab64480d2b
SITL: add spin armed rpm
2022-09-07 17:03:03 +01:00
Iampete1
79b44b2517
SITL: params always use set method
2022-08-03 13:43:48 +01:00
Andrew Tridgell
8cc5172ff3
SITL: fill in wind from flightaxis
2022-08-02 07:49:34 +10:00
Iampete1
7683b36e3b
SITL: set compass vector after loading defualts
2022-07-28 16:51:33 +10:00
Andrew Tridgell
6b55073508
SITL: added SIM_VIB_MOT_HMNC parameter
2022-07-03 18:47:33 +10:00
Peter Barker
73190d075a
SITL: add support for SIM_OH_MASK (sim-on-hardware output enable mask
2022-05-24 10:35:32 +10:00
Iampete1
32f8062b3e
SITL: move to 32 servo outs
2022-05-22 12:07:37 +10:00
Andrew Tridgell
2dea725d80
SITL: fixed up airspeed parameters
...
use a separate airspeed structure and separate ratio per sensor
2022-05-17 19:34:32 +10:00
Peter Barker
348f0ad590
SITL: add SIM_SONAR_ROT, use it for measuring horizontal distances
2022-04-19 10:26:10 +10:00
Peter Barker
2e809282e7
SITL: split AP_HAL_SITL and AP_SIM_ENABLED
2022-03-17 14:39:55 +11:00
Peter Barker
4dfc9494ef
SITL: correct compilation if INS_TEMPERATURE_CAL_ENABLE is off
2022-02-08 10:44:01 +11:00
Peter Barker
8782e21443
SITL: do not compile SIM_GPS parameters in if SIM_GPS not enabled
2022-01-25 19:28:06 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
87b0db7990
SITL: correct typos in comments
2022-01-12 16:47:42 +09:00
Andrew Tridgell
df30d4e723
SITL: support interpolated GPS lag
...
use SIM_GPS_LAG_MS and SIM_GPS2_LAG_MS for the lag in milliseconds
2022-01-12 07:54:46 +11:00
Andrew Tridgell
c565b8a84e
SITL: support KSXT message for Unicore NMEA
2022-01-11 10:34:11 +11:00